Netatmo NWA01-WW Manual

Netatmo Vejrstation NWA01-WW

Læs gratis den danske manual til Netatmo NWA01-WW (5 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Netatmo NWA01-WW, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
Wind Gauge for Netatmo Weather Staon
What is the addional Wind Gauge module?
You can add an addional Wind Gauge module to your Netatmo Weather Staon. It does not work
separately and needs the Netatmo Staon to operate.
It allows you to monitor wind speed and direcon.
You can add only one Wind Gauge module to your Netatmo Weather Staon.
Downloaded from www.vandenborre.be
Setup and precauon
Important:
- Do not twist the Wind Gauge.
- Do not touch the sensors.
Setup from smartphone / PC
To add an addional Wind Gauge module to the staon, follow the instrucons on its quick start
guide, or click on "Add/Remove a module" in the sengs menu, under "My staons". The app will
guide you through the installaon.
1. You need to launch the module Manager from the smartphone/tablet app or your PC.
o If you are using a PC, connect the staon to the PC with the USB cable.
o If you are using your smartphone, touch the top of the staon’s main module unl it
blinks blue, the staon is now in Bluetooth mode so it can be congured from your
phone.
2. Select the opon New Wind Gauge . “ ”
3. Remove the baeries from the Wind Gauge and reinsert them. You need to unscrew the four
screws at the boom base to access the baeries compartment.
4. Once the baeries are reinserted, place the Wind Gauge next to the staon (at about 10 cm
/ 4 inches).
5. The Staon will recognize the module. The setup is done. Now you can place the Wind Gauge
up to 100m away from the main Staon, nd below some ps on how to nd the best spot.
The Wind Gauge should be placed at the highest point possible in order to get reliable measures and
avoid turbulences created by obstacles surrounding it. It is recommended to place it about 1 m / 4 .
above the top of your roof.
The Wind Gauge should be placed horizontally and the arrow (there’s one at on the top and one in
the boom) must be poinng to the North. You can use your smartphone's compass app to check
that when you install your Wind Gauge at home.
To secure the Wind Gauge, you may use a ¼ inches standard camera mounng screw.
Downloaded from www.vandenborre.be

Produkt Specifikationer

Mærke: Netatmo
Kategori: Vejrstation
Model: NWA01-WW

Har du brug for hjælp?

Hvis du har brug for hjælp til Netatmo NWA01-WW stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vejrstation Netatmo Manualer

Netatmo

Netatmo NWA01-WW Manual

1 Oktober 2024
Netatmo

Netatmo NWS01 Manual

1 August 2024
Netatmo

Netatmo NWS03IN Manual

1 August 2024
Netatmo

Netatmo Healthy Home Coach Manual

4 Februar 2024
Netatmo

Netatmo NETA-SW01-EC Manual

26 November 2022
Netatmo

Netatmo Smart Home weather station Manual

5 November 2022
Netatmo

Netatmo NWS01-EC Manual

11 Oktober 2022

Vejrstation Manualer

Nyeste Vejrstation Manualer

La Crosse Technology

La Crosse Technology TX145WSDR Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 328-1415 Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025
Edenwood

Edenwood WS657 Manual

30 Juli 2025
Edenwood

Edenwood E015 Manual

30 Juli 2025
Edenwood

Edenwood WS672 Manual

29 Juli 2025
Sencor

Sencor SWS 11000 Manual

27 Juli 2025
Sencor

Sencor SWS TH270 Manual

26 Juli 2025
Sencor

Sencor SWS 4000 Manual

26 Juli 2025
Marquant

Marquant 943-112 Manual

25 Juli 2025