Netis PE6110 Manual


Læs gratis den danske manual til Netis PE6110 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Netis PE6110, eller vil du spørge andre brugere om produktet?

Side 1/2
What it does:
The netis PE6110 Fast Ethernet PoE Switch provides a great selection for expanding your home or office network.
All the 8 10/100Mbps RJ45 ports support Power over Ethernet(PoE) function. It can automatically detect and
supply power with the IEEE 802.3af compliant Powered Devices (PDs), like PoE APs, IP Phones,IP cameras, etc.In
this case, the electrical power is transmitted along with data in one single cable allowing you to expand your
network to where there are no power lines or outlets.
10 Port Fast Ethernet PoE Switch/
8 Port PoE/ 802.3af
Features:
>10 10/100Mbps Auto-Negotiation RJ45 ports, 8 PoE function
>Complies with IEEE 802.3af standards
>Supports PoE power up to 15.4W for each PoE port, 124W for all PoE ports
>Supports PoE IEEE 802.3af compliant Powered Device (PD)
>Supports 1K MAC address table, MAC address auto-learning & auto-aging
>Supports IEEE 802.3x flow control for Full-duplex mode, Back-pressure flow control for Half-duplex mode ports
>Plug and play, no configuration required
>Steel desktop design, with internal power supply
PE6110
Specifications are subject to change without notice. Netisis a registered trademark of Netis Systems Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders. No part of the specifications maybe reproduced in any form or by any means or used to make any derivative such
as translation, transformation, or adaptation without permission fromNetis Systems Co., Ltd.
PE6110
10 Port Fast Ethernet PoE Switch/8 Port PoE/ 802.3af
FCC, CE
Others
Certification
Environment
Package 1 * PE6110 1*Quick Installation Guide 2 * Brackets 1*Power Cord
Operating Temperature: 0 ~40 Storage Temperature: -40 ~70℃ ℃ ℃ ℃
Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing
Specification:
10 10/100Mbps RJ45 port, with8 PoE function
Hardware
PWR, 1-8 PoE, 1-10 100M
100-240 V AC/50-60Hz
Interface
LED
Power Supply
48V/2.8A
Dimensions (L x W x H )
IEEE 802.3u 100BASE –TX, IEEE 802.3 10BASE –T, IEEE 802.3af, IEEE 802.3x Flow Control
Switching Features
Standards
Access Method
Transmission Method
CSMA/CD
Store and Forward
Switching Fabric Capacity 2.0 Gbps
MAC Address Table 1K, auto-learning & auto-aging
Flow Control
PoE
280 x 173 x 43mm
PoE Power
15.4 Watts (Max. each port) 124 Watts (Max. all ports)
IEEE 802.3x Flow Control, Full-Duplex mode
Back-Pressure Flow Control, Half-Duplex mode


Produkt Specifikationer

Mærke: Netis
Kategori: Ikke kategoriseret
Model: PE6110

Har du brug for hjælp?

Hvis du har brug for hjælp til Netis PE6110 stil et spørgsmål nedenfor, og andre brugere vil svare dig