Neumann LH 32 Manual

Neumann Ikke kategoriseret LH 32

Læs gratis den danske manual til Neumann LH 32 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Neumann LH 32, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

LH 32 Mounting manual

Important safety and mounting

instructions

• Read and follow the safety and mounting instructions, keep these

instructions easily accessible and always include them when pas-

sing the LH 32 on to third parties.

• Also read and follow the installation instructions contained in the

operating manual of the studio monitor to be mounted.

• -When mounting, follow the local, national and international regu

lations and standards.

Intended use

The LH 32 is a holder for fastening a studio monitor to a wall and

providing optimal orientation. The LH 32 is only suitable for 2-way

studio monitors and must only be used indoors in clean, dry rooms

such as studios.

Additional mounting elements are needed to properly mount the

LH32 and an attached studio monitor to the wall, which are not inclu-

ded with delivery.

The LH 32 must not be used for other purposes or in other environ-

ments. In case of any damage or any deviation from the safety and

mounting instructions, immediately dismount the studio monitor and

the LH32.

Required quali cationsﬁ

Only skilled personnel may attach the LH32 to the studio monitor and

mount it on the wall. Due to his/her technical training, know-how and

experience as well as knowledge of relevant provisions, regulations

and standards, the specialist must be able to assess assigned tasks,

recognize potential hazards and ensure appropriate safety measures.

Safety instructions for mounting

• Mount only one LH 32 to one studio monitor, as described in these

assembly instructions.

• If the studio monitor is heavy, a second person to help carry ﬁnd

out the work; during the work, place the studio monitor on a , ﬂat

stable surface that can support its weight.

• Place something soft underneath the studio monitor so that you do

not scratch its surface while performing the work.

• Always use the enclosed original accessories.

• The wall must be able to support the weight of the studio monitor

and all accessories used, such that no parts will fall even if some-

one pulls hard on the power or audio cables. When calculating the

weight, also take into account the additional leverage.

• When mounting the 32 on the wall, use fastening elements (not LH

included with delivery) that are y dimensioned to ensure sucientl

that the entire weight is held securely.

• Mount the LH 32 and the attached studio monitor to a , non-slip ﬂat

wall.

• Before starting work, prepare the adapter plate and fasten it to the

wall. Then attach the two braces for horizontal and vertical inclina-

tion adjustment to the adapter plate and hook the studio monitor

into the 32. Then adjust the studio monitor to the desired incLH -

lination.

• Tighten all screws by hand. Once you have mounting and ﬁnished

aligning the studio monitor, ensure that all screws are y tighﬁrml -

tened.

• Take additional measures to ensure that the LH32 and the attached

studio monitor cannot fall. Use safety wires that are y sucientl

dimensioned for the weight to be secured.

• Do not use the LH 32 in environments that are exposed to external

vibrations.

• Every 3 months, check that all screws are properly tightened and

that the 32, the studio monitor and the wall on which the 32 LH LH

is mounted are in the proper condition.

• Replace the safety wire once it has already prevented the studio

monitor from falling once.

Delivery includes

A: 1 x brace for vertical inclination

B: 1 x brace for horizontal inclination

C: 1 x adapter plate for wall installation

D: 1 x T-nut, 2 x M6, 60mm

E: 2 x metal washers, M6

F: 1 x O-ring

G: 6 x Allen screws, M6x12

H: 2 x Allen screws, M8x12

I: 1 x Allen key, 4mm

J: 1 x Allen key, 5mm

Speciﬁcations

Weight approx. 0.8kg

Dimensions when assembled 116x98x98mm (H x W x D)

Max. load 10kg

Warranty

For the current terms and conditions of the warranty, please visit

www.neumann.com.

georg neumann gmbh · Leip ziger S tr . 112 · 10117 ber Lin · germany 04/17 · 544944/a04

te L +49 (0)30 / 41 77 24-0 · fax -50 · headoffice@neumann.c om · www.neumann.c om

Produkt Specifikationer

Mærke:	Neumann
Kategori:	Ikke kategoriseret
Model:	LH 32
Bredde:	98 mm
Dybde:	98 mm
Vægt:	800 g
Produktfarve:	Sort
Placering:	Væg
Højde (maks.):	116 mm
Maksimal vægt:	10 kg