Nilfisk GM 400 Manual

Nilfisk Støvsuger GM 400

Læs gratis den danske manual til Nilfisk GM 400 (32 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Nilfisk GM 400, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
12129200. 12149200. Replacement with the new 1200W motor kit A-0.6.5.
1
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 SERIES
Instruction No. 82129400/00-08
To be performed by a skilled
or instructed person only !
Disconnect the vacuum cleaner
from the power supply before
starting the work!
! Models with bag-full indicator:
Open the dust cover until it stops
and continue with a little pressure
by hand until it slides free of the
hinges.
Models with no bag-full indicator:
Open the dust cover and lift it out
of the hinges.
Remove filter with dust bag.
Remove the dust bag holder by
pressing bottom clip and ease the
holder out of the bottom. This
releases the hook at the container
wall.
@ To separate the top and bottom
housing and avoid scratches on
the parts, place tool no. 22361400
under the buffer.
Follow instruction 82361500
Remove the strap (12) by hand.
Lift up the buffer and remove the
top housing.
# Free the cord with plug from
the terminal box in the top housing
by using a Pozi screwdriver no. 2
or in old models press it out by
hand.
Remove the cord reel and lock the
cord to the reel. Remove internal
wires and release the on/off switch
by pressing a screwdriver under it.
Remove the motor housing with
four screws by a Pozi screwdriver
no. 2.
Replace the motor unit with the
new complete motor housing
included the thermal switch and
connect wires as described.
Refit in reverse order. Press the
buffer back in place by hand after
mounting the strap around the
housings.
W E
Q
12
6 5 9 6 4 3
View with existing motor housing removed.
New motor
housing
to be
mounted
under exist-
ing motor
housing
Top view
New cord
reel shown
Capacitor
with foam
Flex
Existing
motor housing
Note 1
Note 1:
O-ring to be mounted only when
existing motor housing is for two
speed regulation with four grooves.
On/off switch
12129200. 12149200. Replacement with the new 1200W motor kit A-0.6.5.
2
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 SERIES
Instruction No. 82129400/00-11
Diagram for GM 200/300/400
series with one speed
118408xx
11842200
N L
= RFI capacitor
= Thermo switch
= Resistor
Remove and scrap these when
your are installing a new motor
unit on a GM 200 / 300
81859300
81842700
81842800
81842900
81841900

Produkt Specifikationer

Mærke: Nilfisk
Kategori: Støvsuger
Model: GM 400

Har du brug for hjælp?

Hvis du har brug for hjælp til Nilfisk GM 400 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Støvsuger Nilfisk Manualer

Nilfisk

Nilfisk BA 551CD Manual

11 December 2024
Nilfisk

Nilfisk Buddy 18 Manual

27 September 2024
Nilfisk

Nilfisk Extreme X100 Manual

20 September 2024
Nilfisk

Nilfisk GD 1005 Manual

18 September 2024
Nilfisk

Nilfisk Power Energy Eco Manual

18 September 2024
Nilfisk

Nilfisk GWD 320 Manual

11 September 2024
Nilfisk

Nilfisk MAXXI II 55-2 WD Manual

8 September 2024
Nilfisk

Nilfisk Quick 28V Manual

2 September 2024
Nilfisk

Nilfisk extremex100 Manual

26 August 2024
Nilfisk

Nilfisk family de luxe cdf 2040 Manual

26 August 2024

Støvsuger Manualer

Nyeste Støvsuger Manualer

I-Vac

I-Vac Pets S40 Manual

15 Juni 2025
AEG

AEG Clean 5000 AL51C1DRF Manual

15 Juni 2025
Lavex

Lavex BJ1623 Manual

15 Juni 2025
Pullman

Pullman CB60 Manual

14 Juni 2025
Work Hero

Work Hero D10LP Manual

14 Juni 2025
Pullman

Pullman PV500 Manual

14 Juni 2025
Domo

Domo DO250SC Manual

14 Juni 2025
I-Vac

I-Vac Animal S50 Manual

14 Juni 2025
Pullman

Pullman AS5 Evolution Manual

14 Juni 2025
Work Hero

Work Hero WD20LSS Manual

14 Juni 2025