Nilfisk GM 410 Manual

Nilfisk Støvsuger GM 410

Læs gratis den danske manual til Nilfisk GM 410 (32 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Nilfisk GM 410, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

12129200. 12149200. Replacement with the new 1200W motor kit A-0.6.5.

ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 SERIES

Instruction No. 82129400/00-08

To be performed by a skilled

or instructed person only !

Disconnect the vacuum cleaner

from the power supply before

starting the work!

! Models with bag-full indicator:

Open the dust cover until it stops

and continue with a little pressure

by hand until it slides free of the

hinges.

Models with no bag-full indicator:

Open the dust cover and lift it out

of the hinges.

Remove filter with dust bag.

Remove the dust bag holder by

pressing bottom clip and ease the

holder out of the bottom. This

releases the hook at the container

wall.

@ To separate the top and bottom

housing and avoid scratches on

the parts, place tool no. 22361400

under the buffer.

Follow instruction 82361500

Remove the strap (12) by hand.

Lift up the buffer and remove the

top housing.

# Free the cord with plug from

the terminal box in the top housing

by using a Pozi screwdriver no. 2

or in old models press it out by

hand.

Remove the cord reel and lock the

cord to the reel. Remove internal

wires and release the on/off switch

by pressing a screwdriver under it.

Remove the motor housing with

four screws by a Pozi screwdriver

no. 2.

Replace the motor unit with the

new complete motor housing

included the thermal switch and

connect wires as described.

Refit in reverse order. Press the

buffer back in place by hand after

mounting the strap around the

housings.

W E

6 5 9 6 4 3

View with existing motor housing removed.

New motor

housing

to be

mounted

under exist-

ing motor

housing

Top view

New cord

reel shown

Capacitor

with foam

Flex

Existing

motor housing

Note 1

Note 1:

O-ring to be mounted only when

existing motor housing is for two

speed regulation with four grooves.

On/off switch

12129200. 12149200. Replacement with the new 1200W motor kit A-0.6.5.

ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 SERIES

Instruction No. 82129400/00-11

Diagram for GM 200/300/400

series with one speed

118408xx

11842200

N L

= RFI capacitor

= Thermo switch

= Resistor

Remove and scrap these when

your are installing a new motor

unit on a GM 200 / 300

81859300

81842700

81842800

81842900

81841900

Produkt Specifikationer

Mærke:	Nilfisk
Kategori:	Støvsuger
Model:	GM 410

Har du brug for hjælp?

Hvis du har brug for hjælp til Nilfisk GM 410 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Støvsuger Nilfisk Manualer

Nilfisk BA 551CD Manual

11 December 2024

Nilfisk Buddy 18 Manual

27 September 2024

Nilfisk Extreme X100 Manual

20 September 2024

Nilfisk GD 1005 Manual

18 September 2024

Nilfisk Power Energy Eco Manual

18 September 2024

Nilfisk GWD 320 Manual

11 September 2024

Nilfisk MAXXI II 55-2 WD Manual

8 September 2024

Nilfisk Quick 28V Manual

2 September 2024

Nilfisk extremex100 Manual

26 August 2024

Nilfisk family de luxe cdf 2040 Manual

26 August 2024

Støvsuger Manualer

Nyeste Støvsuger Manualer

I-Vac Pets S40 Manual

15 Juni 2025

AEG Clean 5000 AL51C1DRF Manual

15 Juni 2025

Lavex BJ1623 Manual

15 Juni 2025

Pullman CB60 Manual

14 Juni 2025

Work Hero D10LP Manual

14 Juni 2025

Pullman PV500 Manual

14 Juni 2025

Domo DO250SC Manual

14 Juni 2025

I-Vac Animal S50 Manual

14 Juni 2025

Pullman AS5 Evolution Manual

14 Juni 2025

Work Hero WD20LSS Manual

14 Juni 2025