Nokia 8800 Manual

Nokia Mobil 8800

Læs gratis den danske manual til Nokia 8800 (209 sider) i kategorien Mobil. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Nokia 8800, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/209

User Guide Manual del Usuario

Nokia 8800 and

Nokia 8801 User Guide

9232467

Issue 1_draft07

Nota: La traducción en español de este manual inicia en la Página 99.

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products RM-13 and

RM-33 are in conformity with the provisions of the following Council Directive:1999/5/EC.

A copy of the Declaration of Conformity can be found at

http://www.nokia.com/phones/declaration_of_conformity/.

PART NO. 9238831, ISSUE NO. 1

Nokia, Nokia Connecting People, Nokia 8800, Nokia 8801, Pop-Port, PC Suite, and the Nokia

Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation.

Other company and product names mentioned herein may be trademarks or trade names of

their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

US Patent No 5818437 and other pending patents. T9 text input software

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and

non-commercial use in connection with information which has been encoded in compliance

with the MPEG-4 Visual Standard by a consumer engaged in a personal and non-commercial

activity and (ii) for use in connection with MPEG-4 video provided by a licensed video

provider. No license is granted or shall be implied for any other use. Additional information

including that relating to promotional, internal and commercial uses may be obtained from

MPEG LA, LLC. See http://www.mpegla.com.

The information contained in this user guide was written for the Nokia 8800 and Nokia 8801

products. Nokia operates a policy of ongoing development. Nokia reserves the right to make

changes to any of the products described in this document without prior notice.

F o r y o u r s a f e t y

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the

vehicle while driving. Your first consideration while driving should be

road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference

in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refuelling point. Do not use near fuel

or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is

in progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

F o r y o u r s a f e t y

BACKUP COPIES

Remember to make back-up copies or keep a written record of all

important information.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as

many times as needed to clear the display and return to the start screen.

Enter the emergency number, then press the call key. Give your location.

Do not end the call until given permission to do so.

■About your device

The wireless device described in this guide is approved for use on the EGSM 850,

EGSM 900, GSM 1800, and EGSM 1900 networks:

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the phone must be switched on. Do not switch the device on when

wireless phone use may cause interference or danger.

■Network services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These network services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

network services. Your service provider may need to give you additional instructions

for their use and explain what charges will apply. Some networks may have

limitations that affect how you can use network services. For instance, some

networks may not support all language-dependent characters and services.

Nokia 8800 phone RM-13 900, 1800, and 1900 networks

Nokia 8801 phone RM-33 850, 1800, and 1900 networks

F o r y o u r s a f e t y

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Your

device may also have been specially configured. This configuration may include

changes in menu names, menu order and icons. Contact your service provider for

more information.

■Shared memory

The phone has two different memory allocations. The following features in this

device may share the first memory: contacts, text messages, multimedia messages

(but no attachments), instant messages, groups, voice tags, calendar, and to-do

notes. The second shared memory is used by files stored in the Gallery, attachments

of multimedia messages, e-mail, and JavaTM applications. Use of one or more of

these features may reduce the memory available for the remaining features sharing

memory. For example, saving many Java applications may use all of the available

memory. Your device may display a message that the memory is full when you try

to use a shared memory feature. In this case, delete some of the information or

entries stored in the shared memory features before continuing. Some of the

features, such as text messages, may have a certain amount of memory specially

allotted to them in addition to the memory shared with other features.

W e l c o m e

1. Welcome

Congratulations on your purchase of the Nokia 8800 or Nokia 8801 mobile phone.

This is a product of superior design and craftsmanship, so please handle your

phone with special care. Besides your mobile phone having stainless steel covers

and a glass display treated for scratch resistance, some of its other features include

a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera.

■Updates

From time to time, Nokia may update this guide to reflect changes. The latest

version may be available at www.nokiausa.com. Also, an interactive tutorial may

be available at www.nokiausa.com.

■Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if

you should need to call a customer center or to have your phone repaired.

■Get help

Find your phone label

If you need to call the Nokia Customer Care

Center or your service provider, you will

need to provide specific information about

your phone. This information is provided on

the phone label (1), which is on the back of

the phone (under the battery). It contains

the model and serial numbers, as well as

other important information about your phone.

To help Nokia promptly answer your questions, please have the following

information available before contacting the Nokia Customer Care Center:

• Your phone model number (8800 or 8801)

• Type number (RM-13 or RM-33)

• International mobile equipment identity (IMEI)

• Your zip code

• The phone or enhancement in question

W e l c o m e

■Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals,

including those with disabilities. For more information, visit the web site at

www.nokiaaccessibility.com.

■E-newsletters

When you register your phone, you can sign up for the Nokia e-newsletter, Nokia

Connections. You will receive tips and tricks on using your phone, enhancement

information, and special offers.

■Copyright protection

from being copied, modified, transferred, or forwarded.

■Configuration settings service

To use some of the network services, such as mobile Internet services, multimedia

messaging service (MMS), or remote Internet server synchronization, your phone

needs the correct configuration settings. You may be able to receive the settings

directly as a configuration message. After receiving the settings, you need to save

them on your phone. The service provider may provide a PIN that is needed to

save the settings. For more information on availability of the settings, contact

your service provider.

When you have received a configuration message, Configuration settings

received is displayed.

• To save the settings, select Show > Save. If the phone requests Enter settings'

PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,

contact the service provider who supplies the settings. If no settings are saved

yet, these settings are saved and set as default configuration settings.

Otherwise, the phone asks, Activate saved configuration settings?.

• To discard the received settings, select Show > Discard.

• To edit the settings, see "Configuration" on page 51.

■Network support

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.

Some features of this device, such as text messages, multimedia messages, instant

messages, e-mail, presence enhanced contacts, mobile Internet services, content

and application downloads, and synchronization with a remote Internet server,

require network support for these technologies.

G e t t i n g s t a r t e d

Check the model number of any charger before use with this device. This device is

intended for use when supplied with power from the ACP-12 charger.

For availability of approved enhancements, please check with your dealer.

1. Connect the charger to a standard

wall outlet.

2. Insert the charger plug into the

round jack in the bottom of the

phone. If the battery is completely

empty, it may take a few minutes

before the charging indicator

appears on the display or before

any calls can be made.

3. Disconnect the charger from the

phone when the battery is fully

charged.

You can use the phone while the charger is connected. The charging time depends

on the charger and the battery used. For example, charging a BL-5X battery with

the ACP-12 charger takes approximately 1 hour and 5 minutes while the phone is

in the standby mode.

■Turn the phone on and off

Press and hold the power key as shown. If the phone asks for a

PIN, enter the code, and select OK.

When you turn on your phone for the first time, the phone is in

standby mode (see "Standby mode" on page 15) and a query

appears, asking for the configuration settings from your service

provider (network service). Confirm or decline the query.

See "Configuration settings service" on page 9.

■Open the keypad

1. Hold the phone in one hand.

2. With the other hand, press your thumb on the part of the

phone that is below the display screen.

3. Push the top part of the phone (slide) upwards, as shown in

the illustration.

G e t t i n g s t a r t e d

■Normal operating position

Use the phone only in its normal

operating position.

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the

antenna unnecessarily when the device is switched on. Contact with the

antenna affects call quality and may cause the device to operate at a

higher power level than otherwise needed. Avoiding contact with the

antenna area when operating the device optimizes the antenna

performance and the battery life.

Y o u r p h o n e

3. Your phone

■Keys and parts

• Power key (1)

• Loudspeaker (2)

• Earpiece (3)

• Left selection key (4)

Right selection key (5)

Middle selection key (6)

The function of the selection key depends

on the guiding text shown on the display

above the key.

• 4-way scroll key (7) that allows you to scroll

up, down, left and right

• Call key (8) dials a phone number and answers

a call

• End key (9) ends an active call and allows you

to exit from any function

• Battery cover release buttons (10)

• Microphone (11)

• Charger connector (12)

• Enhancements connector (13)

• Camera lens (14)

• Headset HS-15, rotating clip (15)

Y o u r p h o n e

■ Indicators and icons

Your phone has two types of identifiers: indicators and icons.

Indicators

See "Standby mode" on page 15 for information on indicators.

Icons

Icons are graphical representations of a specific item or situation. The following

list describes each icon.

You have received one or several text or multimedia messages.

You have received one or several multimedia messages.

The phone registered a missed call.

The phone keypad is locked.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off.

The alarm clock is set.

Shown in the top left of the display when the packet data connection

mode Always online is selected and the packet data service is available.

Shown in the top left of the display when the packet data connection

is established.

Shown in the top right of the display when the packet data connection

is suspended (on hold); for example, if there is an incoming or outgoing

call during the packet data connection.

Indicates an active Bluetooth wireless connection.

C a l l f u n c t i o n s

5. Call functions

■ Make a call

1. Enter the phone number, including the area code. To delete an incorrect

character, select Clear.

For international calls, press * twice for the international prefix (the + character

replaces the international access code) and then enter the country code, the area

code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or close the slide.

■ 1-touch dialing

Assign a phone number to one of the 1-touch dialing keys, 2 to 9. Call the number

by one of the following ways:

• Press a 1-touch dialing key and then press the call key.

• If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the

call is started. See 1-touch dialing in "Call" on page 50.

■ Answer or reject a call

• Open the slide or press the call key to answer the call. To mute the ringing

tone, select Silence.

• To reject an incoming call when the slide is open, press the end key.

If Forward if busy is activated in your voice is activated in your voice mailbox, the

call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset

supplied with the headset key is connected to the phone, press the headset key to

answer and end a call.

Call waiting (network service)

To answer the waiting call during an active call, press the call key. The first call is

put on hold. To end the active call, press the end key.

To activate the Call waiting function, see "Call" on page 50.

P h o n e m e n u s

6. Phone menus

Phone features are grouped according to function and are accessed through the

main menus of your phone. Each main menu contains submenus and lists from

which you can select or view items and customize phone features. You can access

these menus and submenus by using the scroll method.

Some menus may not be available, depending on your network. For more information,

contact your service provider.

■ Menu views

Your phone may have two types of menu views: List and Grid.

In the List interface, images introduce every menu. Use the scroll up and scroll down

keys to navigate through the menus. As you scroll through the menus, the menu

number appears in the upper right corner of the display. Below the menu number is a

scroll bar with a tab. The tab moves up or down as you scroll through the menus,

providing a visual representation of your current position in the menu structure.

In the Grid interface, multiple menu icons appear on a single display. Use the

four-way scroll key to navigate through the icons. The name of the menu appears

at the top of the display and the icon for the selected menu is outlined.

To change the menu view, select Options > Main menu view > List or Grid.

■ Access a menu function

1. Select Menu and the menu you want.

2. If the menu contains submenus, select the one that you want.

3. If the selected menu contains further submenus, select the one that you want

4. To return to the previous menu level, select Back. To exit the menu, select Exit.

M e s s a g e s

7. Messages

You can use mobile messages to keep in touch with friends,

family, and business associates by using the short message

service (SMS). Not all messaging features are available in all

wireless networks. Contact your service provider for availability

and subscription information.

When sending messages, your phone may display the words Message sent. This is

an indication that the message has been sent by your device to the message

centre number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details about

messaging services, check with your service provider.

■Text messages (network service)

Your device supports the sending of text messages beyond the character limit for a

single message. If your message exceeds 160 characters, it will be sent as a series

of two or more messages. In the navigation bar, you can see the message length

indicator counting backwards from 160. For example, 10/2 means that you can

still add 10 characters for the text to be sent as two messages.

Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there

are special characters in your message, the indicator may not show the message

length correctly. Before the message is sent, the device tells you if the message

exceeds the maximum length allowed for one message. You can cancel sending

by selecting Cancel or you can save the message in the inbox.

You can add pictures and templates to your text messages. Text templates are

indicated by and picture templates are indicated by . Each picture message

is made up of several text messages. Therefore, sending one picture message may

cost more than sending one text message. Contact your service provider for

pricing information.

Before you can send any text, picture, or e-mail message, you need to save some

message settings. See "Message settings" on page 34.

To check SMS e-mail service availability and to subscribe to the service, contact

your service provider.

M e s s a g e s

Write and send

1. Select Menu > Messages > Create message > Text message.

2. Enter a message. See "Text entry" on page 23.

3. To insert a template to the text message, select Use template and the

template you want to insert.

4. To send the message, select Send > Recently used, To phone number, To

many, or To e-mail address and enter a phone number or e-mail address.

5. To send a message using a predefined message profile, select Via sending profile.

For the sending profile, see "Text and SMS e-mail" on page 34.

Read and reply

is shown when you have received a message or an e-mail using SMS.

The blinking indicates that the message memory is full. Before you can

receive new messages, delete some of your old messages in the Inbox folder.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. If more than

one message has been received, select the message that you want to read.

indicates an unread message.

2. While reading a message, select Options and delete or forward the message,

edit the message as a text message or an SMS e-mail, rename the message you

are reading or move it to another folder, or view or extract message details.

You can also copy text from the beginning of the message to your phone

calendar as a reminder note. To save the picture in the Templates folder when

reading a picture message, select Save picture.

3. To reply as a message, select Reply > Text message or Multimedia msg..

Enter the reply message. When replying to an e-mail, first confirm or edit the

e-mail address and subject.

4. To send the message to the displayed number, select Send > OK.

Templates

To access the template list, select Menu > Messages > Saved items > Text

messages > Templates.

M e s s a g e s

■Multimedia messages (network service)

Note: Only devices that offer compatible multimedia message or e-mail

features can receive and display multimedia messages. Multimedia

message objects may contain viruses or otherwise be harmful to your

device or PC. Do not open any attachment if you are not sure of the

trustworthiness of the sender.

A multimedia message can contain text, sound, a picture, a calendar note, a business

card, or a video clip. The phone supports multimedia messages that are up to 300KB

(some operators/networks may limit this to 100 KB) in size. If the message is too

large, the phone may not be able to receive it. Some networks allow text messages

that include an Internet address where you can view the multimedia message.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP, and PNG

• Sound: MP3, AAC, Scalable polyphonic MIDI (SP-MIDI), AMR audio and

monophonic ringing tones

• Video clips: 3GP format with QCIF and SubQCIF image size and AMR, WB

AMR, or ACC LC audio

You cannot receive multimedia messages during a call, a game, another Java

application, or an active browsing session over GSM data. Because delivery of

multimedia messages can fail for various reasons, do not rely solely upon them

for essential communications.

Write and send

To set the settings for multimedia messaging, see "Multimedia" on page 34. To

check availability and to subscribe to the multimedia messaging service, contact

your service provider.

1. Select Menu > Messages > Create message > Multimedia msg..

2. Enter a message. See "Text entry" on page 23.

• To insert a file from the Gallery, select Options > Insert > Image, Sound

clip or Video clip and the option you want.

If you select Options > Insert > New sound clip, the Recorder opens, and

you can start a new recording. When you have finished the recording, it is

added to the message.

If you select Options > Insert > New image, the Camera opens, and you

can take a new photo to add to the message.

• To insert a business card or a calendar note in the message, select

Options > Insert > Business card or Calendar note.

M e s s a g e s

To add a folder, select Options > Add folder. If you have not saved any folders,

select Add.

To delete or rename a folder, scroll to the folder you want, and select Options >

Delete folder or Rename folder.

■Instant messaging (network service)

You can take text messaging to the next level by experiencing instant messaging

(IM) in a wireless environment. You can engage in instant messaging with friends

and family, regardless of the mobile system or platform (like the Internet) they

are using, as long as you all use the same instant messaging service.

Before you can start using instant messaging, you must first subscribe to your

wireless service provider’s text messaging service and register with the instant

messaging service you want to use. You must also obtain a user name and

password before you can use instant messaging. See "Register with an instant

messaging service" on page 28 for more information.

Note: Depending on both your IM service provider and your wireless

service provider, you may not have access to all of the features

described in this guide.

To set the required settings for the instant messaging service, see Connect. settings

in "Access" on page 28. The icons and texts on the display may vary, depending

on the instant messaging service.

Depending on the network, the active instant messaging conversation may consume

the phone battery faster, and you may need to connect the phone to a charger.

You can do this by registering over the Internet with the IM service provider you

have selected to use. During the registration process, you will have the opportunity

to create the user name and password of your choice. For more information about

signing up for instant messaging services, contact your wireless service provider.

Access

To access the menu while still offline, select Menu > Messages > Instant

messages. If more than one set of connection settings for instant messaging

service is available, select the one you want. If there is only one set defined, it is

selected automatically.

The following options are shown: Login to connect to the instant messaging service,

Saved conversations to view, erase or rename the instant messages conversations

that you have saved during the instant messages session, or Connect. settings to

edit the settings needed for messaging and presence connection.

M e s s a g e s

Connect

To connect to the instant messaging service, open the Instant messages menu,

activate an instant messaging service, and select Login. When the phone has

successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Logout.

Sessions

Connect to the instant messaging service and select one of the following

Conversations to view the list of new and read instant messages or invitations to

instant messaging during the active instant messaging session. Scroll to the

message or invitation that you want and select Open to read the message.

• indicates a new group message

• indicates a read group message

• indicates a new instant message

• indicates a read instant message

• indicates an invitation

The icons and texts on the display may vary, depending on the instant messaging

service you have selected.

IM contacts includes the contacts that you have added. Scroll to the contact

with whom you would like to chat and select Chat or Open if a new contact is

shown in the list. To add contacts see "IM contacts" on page 31.

indicates the online and the offline contacts in the phone contacts

memory. indicates a blocked contact. indicates a contact that has been

sent a new message.

Groups > Public groups. The list of bookmarks to public groups provided by the

service provider is displayed. To start a instant messaging session with a group,

scroll to a group, and select Join. Enter the screen name that you want to use in the

conversation. When you have successfully joined the group conversation, you can

start a group conversation. To create a private group, see "Groups" on page 31.

Search > Users or Groups to search for other instant messaging users or public

groups on the network by phone number, screen name, e-mail address, or name.

If you select Groups, you can search for a group by a member in the group, or by

group name, topic, or ID.

To start the conversation when you have found the user or the group that you

want, select Options > Chat or Join group.

M e s s a g e s

Accept or reject an invitation

In the standby mode, when you are connected to the instant messaging service

and you receive a new invitation, New invitation received is displayed. To read

it, select Read. If more than one invitation is received, scroll to the invitation you

want, and select Open. To join the private group conversation, select Accept, and

enter the screen name; or to reject or delete the invitation, select Options >

Reject or Delete.

Read an instant message

In the standby mode, when you are connected to the instant messaging service,

and you receive a new message that is not a message associated with an active

conversation, New instant message is displayed. To read it, select Read. If you

receive more than one message, scroll to the message, and select Open.

New messages received during an active conversation are held in Instant messages >

Conversations. If you receive a message from someone who is not in IM contacts,

the sender ID is displayed. To save a new contact that is not in the phone memory,

select Options > Save contact.

Participate in a conversation

Join or start an IM session by selecting Write. Write your message, and select

Send or press the call key to send it. If you select Options, some of the following

options are available: View conversation, Save contact, Group members, Block

contact, and End conversation.

Set your availability

You can determine if other users can tell whether you are available or not.

1. Connect to the instant messaging service.

2. To view and edit your own availability information, or screen name,

select My settings.

3. To allow all the other instant messaging users to see you as being online,

select Availability > Available for all.

To allow only the contacts in your instant messaging contacts list to see you

as being online, select Availability > Avail. for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service, indicates that you

are online and that you are not visible to others.

M e s s a g e s

IM contacts

To add contacts to the instant messaging contacts list, connect to the instant

messaging service, and select IM contacts. To add a contact to the list, select

Options > Add contact, or if you have no contacts added, select Add. Select

Enter ID manually, Search from serv., Copy from server, or By mobile number.

Scroll to a contact, and to start a conversation, select Chat, or select Options >

Contact info, Block contact (or Unblock contact), Add contact, Remove contact,

Change list, Copy to server, or Availability alerts.

Block or unblock messages

To block messages, connect to the instant messaging service, and select

Conversations > IM contacts; or join or start a conversation. Scroll to the

contact from whom you want to block incoming messages, select Options >

Block contact > OK.

To unblock the messages, connect to the instant messaging service, and select

Blocked list. Scroll to the contact from whom you want to unblock the messages,

and select Unblock.

Groups

You can create your own private groups for an instant messaging conversation,

or use the public groups provided by the service provider. The private groups exist

only during an instant messaging conversation, and the groups are saved on the

server of the service provider. If the server you are logged into does not support

group services, all group-related menus are dimmed.

Public

You can bookmark public groups that your service provider may maintain. Connect

to the instant messaging service, and select Groups > Public groups. Scroll to a

group with which you want to chat, and select Join. If you are not in the group,

enter your screen name as your nickname for the group. To delete a group from

your group list, select Options > Delete group.

To search for a group, select Groups > > Public groups Search groups. You can

search for a group by a member in the group, by group name, topic, or ID.

Private

Connect to the instant messaging service, and select Groups > Create group.

Enter the name for the group and the screen name that you want to use. Mark the

private group members in the contacts list, and write an invitation.

M e s s a g e s

Read and reply

Select Menu > Messages > E-mail > Inbox and Options to view the

available options.

To reply to an e-mail, select Reply > Original text or Empty screen. To reply to

many e-mails, select Options > Reply to all. Confirm or edit the e-mail address

and subject, then write your reply. To send the message, select Send > Send now.

Inbox and other folders

Your phone saves e-mails that you have downloaded from your e-mail account in

the Inbox folder. Other folders contains the following folders: Drafts for saving

unfinished e-mails, Archive for organizing and saving your e-mails, Outbox for

saving e-mails that have not been sent, and Sent items for saving e-mails that

have been sent.

To manage the folders and their e-mail content, select Options > Manage folder.

Delete messages

1. Select Menu > Messages > E-mail > Options > Manage folder and the

folder you want.

2. Select the messages that you want to delete and Options > Delete.

Deleting an e-mail from your phone does not delete it from the e-mail server. To set

the phone to delete the e-mail from the e-mail server, select Menu > Messages >

E-mail > Options > Extra settings > Leave c. on server > Delete retr. msgs.

■Voice messages (network service)

If you subscribe to voice mail, your service provider will furnish you with a voice

mailbox number. You need to save this number to your phone to use voice mail.

When you receive a voice message, your phone lets you know by beeping, displaying

a message, or both. If you receive more than one message, your phone shows the

number of messages received.

To call your voice mailbox, select Menu > Messages > Voice messages > Listen

to voice messages. To enter, search for, or edit your voice mailbox number, select

Voice mailbox number.

If supported by the network, shows new voice messages. Select Listen to

call your voice mailbox number.

■Info messages (network service)

With the message network service, you can receive short text messages from

your service provider on various topics, such as weather and traffic conditions.

Contact your service provider for more information.

M e s s a g e s

■Service commands

Use the Service commands editor to enter and send service requests (also known

as USSD commands) to your service provider. Contact your service provider for

information about specific service commands.

Select Menu > Messages > Service commands.

■Delete all messages

1. Select Menu > Messages > Delete messages, the folder from which you

want to delete the messages, and Yes.

2. If the folder contains unread messages, select Yes.

■Message settings

Text and SMS e-mail

The message settings affect the sending, receiving, and viewing of messages.

1. Select Menu > Messages > Message settings >Text messages >

Sending profile.

2. If more than one message profile set is supported by your SIM card, select the

set you want to change and one of the following options, which may be available:

Message center number (delivered from your service provider), Messages

sent via, Message validity, Default recipient number (text messages) or

E-mail server (e-mail), Delivery reports, Use packet data, Reply via same

center (network service), and Rename sending profile.

Select Save sent messages >Yes to set the phone to save the sent text messages

in the Sent items folder.

Multimedia

The message settings affect the sending, receiving, and viewing of

multimedia messages.

Select Menu > Messages > Message settings > Multimedia msgs. and one of

the following options:

•Save sent messages > Yes to set the phone to save sent multimedia messages

in the Sent items folder.

•Delivery reports to ask the network to send delivery reports about your messages

(network service).

•Default slide timing to define the default time between slides in

multimedia messages.

M e s s a g e s

• Incoming mail settings

If you selected POP3 as the incoming server type, the following options are

shown: Retrieve e-mails, POP3 user name, POP3 password, and Display

terminal window.

If you selected IMAP4 as the incoming server type, the following options are

shown: Retrieve e-mails, Retrieval method, IMAP4 user name, IMAP4

password, and Display terminal window.

Other settings

To select other settings for messages, select Menu > Messages > Message

settings > Other settings.

• To change the font size for reading and writing messages, select Font size.

• To set the phone to replace character-based smileys into graphical ones,

select Graphical smileys > Yes.

Message counter

The message counter gives you information on how many text messages have

been sent and received. You can view the amount of sent and received messages,

view details about the messages and reset the counter. To access the message

counter, select Menu > Messages > Message counter.

C o n t a c t s

■My presence (network service)

With the presence service, you can share your presence status with other users

with compatible devices and access to the service. Presence status includes your

availability, status message, and personal logo. Other users who have access to

the service and who request your information are able to see your status. The

requested information is shown in Subscribed names in the viewers’ Contacts

menu. You can personalize the information that you want to share with others

and control who can see your status.

Before you can use presence, you must subscribe to the service. To check the

availability and costs, and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID,

password, and the settings for the service. See "Configuration" on page 51.

While you are connected to the presence service, you can use the other functions

of the phone, and the presence service is active in the background. If you disconnect

from the service, your presence status is shown for a certain amount of time to

viewers depending on the service provider.

Select Menu > Contacts > My presence and one of the following options:

•Connect to 'My presence' service or Disconnect from service to connect to

or disconnect from the service.

•View my presence to view the status in Private presence and Public

presence.

•Edit my presence to change your presence status. Select My availability, My

presence message, My presence logo, or Show to.

•My viewers > Current viewers, Private list, or Blocked list.

•Settings > Show current presence in idle, Synchronize with profiles,

Connection type, or Presence settings.

■Subscribed names

You can create a list of contacts for whom you want presence status information

available. You can view the information, if it is allowed by the contacts and the

network. To view these subscribed names, scroll through the contacts, or use the

Subscribed names menu.

Make sure that the memory in use is either Phone or Phone and SIM.

To connect to the Presence service, select Menu > Contacts > My presence >

Connect to 'My presence' service.

C o n t a c t s

■1-touch dialing

To assign a number to a 1-touch dialing key, select Menu > Contacts > 1-touch

dialing, and scroll to the 1-touch dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select Options >

Change. Select Find and the name first and then the number you want to assign. If

the 1-touch dialing function is off, the phone asks whether you want to activate it.

To make a call using 1-touch dialing, see "1-touch dialing," on page 19.

■Voice dialing

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken words, such as a name, can be a voice tag. The number of

voice tags you can create is limited.

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the

speaker's voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them

in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or

during an emergency, so you should not rely solely upon voice dialing

in all circumstances.

Add and manage voice tags

Save or copy to the phone memory the contacts for which you want to add a

voice tag. You can also add voice tags to the names in the SIM card, but if you

replace your SIM card with a new one, you first must delete the old voice tags

before you can add new ones.

1. Search for the contact to which you want to add a voice tag.

2. Select Details, scroll to the phone number you want, and select Options >

Add voice tag.

3. Select Start, and say clearly the words you want to record as a voice tag.

After recording, the phone plays the recorded tag.

appears after the phone number with a voice tag in Contacts.

C o n t a c t s

To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the

contact with the voice tag that you want, and select an option to listen to, delete,

or change the recorded voice tag.

Make a call using a voice tag

If the phone has an application running that is sending or receiving data using a

GPRS connection, you must end the application before voice dialing.

1. In the standby mode, press and hold the right selection key. A short tone is

heard, and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials

the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialing.

■Info, service and my numbers

Select Menu > Contacts and one of the following functions, which may be available:

Info numbers to call the information numbers of your service provider if the

numbers are included on your SIM card (network service).

My numbers to view the phone numbers assigned to your SIM card, if the numbers

are included on your SIM card.

Service numbers to call the service numbers of your service provider if the

numbers are included on your SIM card (network service).

C a l l l o g

9. Call log

The phone registers the phone numbers of identified missed,

received, and dialed calls, and the approximate length of your

calls. The phone registers missed and received calls only if the

network supports these functions, and the phone is switched on

and within the network’s service area.

■Recent calls list

When you select Options in the Missed calls, Received calls, Dialed numbers,

or Message Recipients menu, you can view the time of the call; edit, view or call

the registered phone number; add it to the memory; or delete it from the list.

You can also send a text message. To delete the recent calls lists, select Delete

recent call lists.

■Counters and timers

Note: The actual invoice for calls and services from your service

provider may vary, depending upon network features, rounding-off for

billing, taxes and so forth.

Some timers may be reset during service or software upgrades.

Select Menu > Call log > Call timers, Packet data counter, or Packet data

conn. timer for approximate information on your recent communications.

■Positioning information

The network may send you a location request. You can ensure that the network will

deliver location information of your phone only if you approve it (network service).

Contact your service provider to subscribe and to agree upon the delivery of location

information. Some networks allow you to request the position of the phone

(network service).

To accept or reject the location request, select Accept or Reject. If you miss the

request, the phone automatically accepts or rejects it according to what you have

agreed with your service provider. The phone displays 1 missed position request.

To view the missed location request, select Show.

To view the information on the 10 most recent privacy notifications and requests

or to delete them, select Menu > Call log > Positioning > Position log > Open

folder or Delete all.

S e t t i n g s

10. Settings

Use this menu to set or change your profiles, themes, personal

shortcuts, time and date settings, call settings, phone settings,

display settings, tone settings, enhancement settings, configuration

settings, security settings, and to restore factory settings.

■Profiles

Your phone has various setting groups, called profiles, for which you can

customize the phone tones for different events and environments.

Select Menu > Settings > Profiles. Scroll to a profile, and select it.

• To activate the selected profile, select Activate.

• To set the profile to be active until a certain time (up to 24 hours), select Timed

and set the time you want the profile setting to end. When the time set for the

profile expires, the previous profile (that was not timed) becomes active.

• To personalize the profile, select Customize, and select the setting you want

to change: then, make the changes.

To change your presence status information, select My presence > My

availability, or My presence message. The My presence menu is available if

you set Synchronize with profiles to On. See "My presence (network service)"

on page 39.

■Themes

You can change the look of your phone display by activating a theme. A theme

can include a wallpaper image, a ringing tone, a screen saver, and a color scheme

to customize your phone for different events and environments. Themes are

stored in the Gallery.

Select Menu > Settings > Themes and one of the following options:

•Select theme to set a theme in your phone. A list of folders in the Gallery

opens. Open the Themes folder, and select a theme.

•Theme downloads to open a list of links to download more themes. See

"Downloads (network service)" on page 74.

S e t t i n g s

■Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. Select and change Incoming call alert,

Ringing tone, Ringing volume, Vibrating alert, Message alert tone, Instant

message alert tone, Keypad tones, and Warning tones. You can find the same

settings in the Profiles menu. See "Profiles" on page 44.

To set the phone to ring only upon calls from phone numbers that belong to a

selected caller group, select Alert for. Scroll to the caller group you want or

All calls and select Mark.

To download more tones, select Tone downloads.

■Display

Select Menu > Settings > Display and one of the following options:

•Wallpaper > Select wallpaper or Select slide set, and an image or a slide

from the Gallery to set your phone to display it when the phone is in standby

mode. To activate the wallpaper, select On.

•Screen saver. To choose a screen saver from the Gallery, select Screen

savers > Image, Slide set, Video clip Analog clock, or Digital clock. To enter

the time after which the screen saver is activated, select Time-out. To activate

the screen saver, select On.

•Power saver > On to save some battery power. A digital clock is displayed

when no function of the phone is used for a certain time.

•Color schemes to change the color of some display components in your

phone, such as indicators, signal bars, and the background image that

appears when using a menu function.

•Idle state font color to select the color for the texts on the display in the

standby mode.

•Operator logo to set your phone to display or hide the operator logo.

■Time and date

Select Menu > Settings > Time and date and one of the following options:

•Clock to set the phone to show the clock in the standby mode, adjust the

clock, and select the time zone and the time format.

•Date to set the phone to show the date in the standby mode, set the date, and

select the date format and date separator.

•Auto-update of date & time (network service) to set the phone to

automatically update the time and date according to the current time zone.

S e t t i n g s

■ My shortcuts

You can set your most frequently used functions to be quickly accessed through

the My shortcuts feature.

Right selection key

To set a specific function (from a predefined list) to the right selection key, select

Menu > Settings > My shortcuts > Right selection key. This function can be

used only if it is supported by your service provider.

Navigation key

To assign other phone functions (from a predefined list) to the navigation key,

select Menu > Settings > My shortcuts > Navigation key.

Voice commands

To activate phone functions by saying a voice tag, select Menu > Settings > My

shortcuts > Voice commands. Select a folder, scroll to a function to which you

want to add a voice tag, and select Add. indicates a voice tag.

■ Connectivity

You can connect your phone to compatible devices by using Bluetooth wireless

technology. For example, you can connect to a Bluetooth stereo headset or a

Bluetooth equipped PC. You can also define the settings for packet data

dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 1.2 supporting the following

profiles: hands-free, object push profile, file transfer profile, dial-up networking

profile, SIM access profile, service discovery profile, generic access profile, serial

port profile, advanced audio distribution profile, and audio video remote control

profile. To ensure interoperability between other devices supporting Bluetooth

technology, use Nokia approved enhancements for this model. Check with the

manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations.

Check with your local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the

background while using other features, increase the demand on battery power

and reduce the battery life.

S e t t i n g s

Bluetooth technology allows you to connect the phone to a compatible Bluetooth

device within approximately 33 feet (10 meters). Since devices using Bluetooth

technology communicate using radio waves, your phone and the other devices do

not need to be in direct line-of sight, although the connection can be subject to

interference from obstructions, such as walls, or from other electronic devices.

To set up a Bluetooth connection, do the following:

1. Select Menu > Settings > Connectivity > Bluetooth.

2. To activate or deactivate the Bluetooth function, select Bluetooth > On or

Off. indicates an active Bluetooth connection.

3. To search for compatible Bluetooth audio devices, select Search for audio

enhancements. Select the device that you want to connect to the phone.

To search for any Bluetooth device in range, select Paired devices. Select New

to list any Bluetooth device in range. Scroll to a device, and select Pair.

4. Enter the Bluetooth passcode of the device to associate (pair) the device to your

phone. You must only give this passcode when you connect to the device for the

first time. Your phone connects to the device, and you can start data transfer.

Settings

You should only accept Bluetooth transmissions from known and trusted sources.

For maximum security, you should set your Bluetooth visibility to Hidden. To do

this, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings >

My phone's visibility or My phone's name.

Connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth

connection is currently active, select Active device. To view a list of Bluetooth

devices that are currently paired with the phone, select Paired devices.

Select Options to access some of the following functions depending on the

status of the device and the Bluetooth connection. Select Connect > Assign

short name or Auto-conn. without confirmation.

■Packet data (EGPRS) (network service)

Enhanced general packet radio service (EGPRS), packet data, is a network service

that allows mobile phones to send and receive data over an Internet protocol

(IP)-based network. It enables wireless access to data networks, such as the Internet.

The applications that may use packet data are MMS, video streaming, browsing

sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.

S e t t i n g s

To define how to use the service, select Menu > Settings > Connectivity >

Packet data > Packet data connection and one of the following:

•When needed — to set the packet data registration and connection to

established when an application using packet data needs it and closed when

you end the application.

•Always online — to set the phone to automatically register to an packet data

network when you switch the phone on. is shown.

Modem settings

You can connect the phone to a compatible computer by using Bluetooth wireless

technology. The phone can be used as a modem to enable EGPRS connectivity from

the computer.

To define the settings for connections from the PC, select Menu > Settings >

Connectivity > Packet data > Packet data settings > Active access point,

activate the access point you want to use, and select Edit active access point.

Select Alias for access point, and enter a nickname for the currently selected

access point. Select Packet data access point, and enter the access point name

(APN) to establish a connection to an EGPRS network.

You can also set the dial-up service settings (access point name) on the computer,

by using the Nokia Modem Options software. See "Nokia PC Suite" on page 79. If

you have set the settings both on the PC and your phone, the PC settings are used.

Data transfer and synchronization

Synchronize your data from calendar, notes, and contacts with another compatible

device (for example, a mobile phone), a compatible PC, or a remote Internet server

(network service).

Partner list

To copy or synchronize data from your phone, the name of the device and the

settings must be in the list of partners in transfer contacts. If you receive data

from another compatible device, the partner is automatically added to the list,

using the contact data from the other device. Server sync and PC sync settings

are the original items in the list.

To add a new partner to the list, such as a new device, select Menu > Settings >

Connectivity > Data transfer > Options > Add transfer contact > Phone sync

or Phone copy, and enter the settings according to the transfer type.

To edit the copy and synchronize settings, select a contact from the partner list,

and select Options > Edit.

To delete a selected partner, select Options > Delete. You cannot delete Server

sync and Phone sync.

S e t t i n g s

■Call

Select Menu > Settings > Call and one of following options:

•Call forwarding (network service) — to forward your incoming calls. You may

not be able to forward your call if some call restrictions functions are active.

See Call restrictions in "Security" on page 52.

•Anykey answer > On — to answer an incoming call by briefly pressing any

key, except the power key, the left and right selection keys, or the end key.

•Automatic redial > On — to set your phone to make a maximum of 10 attempts

to connect the call after an unsuccessful call attempt.

•1-touch dialing > On and the names and phone numbers assigned to the

1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.

•Call waiting > Activate — to set the network to notify you of an incoming

call while you have a call in progress (network service). See "Call waiting

(network service)" on page 19.

•Summary after call > On — to briefly display the approximate duration and

cost (network service) of the call after each call.

•Send my caller ID (network service) > Yes, or Set by network.

•Line for outgoing calls (network service) — to select the phone line 1 or 2 to

make calls, if supported by your SIM card.

■Phone

Select Menu > Settings > Phone and one of the following options:

•Phone language — to set the display language. If you select Automatic, the

phone selects the language according to the information in the SIM card.

•Memory status — to view the free memory and the used memory for each

function in the list.

•Automatic keyguard — to set the keypad of your phone to lock automatically

after a pre-set time delay when the phone is in the standby mode and no

function of the phone has been used. Select On, and you can set the time

from 5 seconds to 60 minutes.

•Security keyguard — to set the phone to ask for the security code when you

unlock the keyguard. Enter the security code, and select On. When the keyguard

is on, calls still may be possible to the official emergency number programmed

into your device.

S e t t i n g s

To save the configuration settings received as a configuration message, see

"Configuration settings service" on page 9.

Select Menu > Settings > Configuration and one of the following options:

•Default configuration settings — to view the service providers saved in the

phone. Scroll to a service provider, and select Details to view the applications

that the configuration settings of this service provider supports. To set the

configuration settings of the service provider as default settings, select

Options > Set as default. To delete configuration settings, select Delete.

•Activate default in all applications — to activate the default configuration

settings for supported applications.

•Preferred access point — to view the saved access points. Scroll to an access

point, and select Options > Details to view the name of the service provider,

data bearer, and packet data access point or GSM dial-up number.

•Connect to service provider support — to download the configuration

settings from your service provider.

•Personal configuration settings — to add new personal accounts for various

services manually, and to activate or delete them. To add a new personal account

if you have not added any, select Add new; otherwise, select Options > Add new.

Select the service type, and enter each of the required parameters. The parameters

differ according to the selected service type. To delete or activate a personal

account, scroll to it, and select Options > Delete or Activate.

■Security

When security features that restrict calls are in use (such as call restrictions,

closed user group, and fixed dialing) calls still may be possible to the official

emergency number programmed into your device.

Select Menu > Settings > Security and one of the following options:

•PIN code request — to set the phone to ask for your PIN or UPIN code every

time the phone is switched on. Some SIM cards do not allow the code request

to be turned off.

•Call restrictions (network service) — to restrict incoming calls to and

outgoing calls from your phone. A password is required.

•Fixed dialing — to restrict your outgoing calls to selected phone numbers, if

this function is supported by your SIM card.

•Closed user group (network service) — to specify a group of people whom

you can call and who can call you.

S e t t i n g s

•Security level > Phone — the phone asks for the security code whenever a

new SIM card is inserted into the phone. Select Memory and the phone asks

for the security code when the SIM card’s memory is selected and you want

to change the memory in use.

•Access codes — to set the PIN code or UPIN code in use, or to change the

security code, PIN code, UPIN code, PIN2 code, and call restrictions password.

•Code in use — to select whether the PIN code or UPIN code should be active.

•Pin2 code request — to select whether a PIN2 code is required when using a

specific phone feature which is covered by the PIN2 code.

■Restore factory settings

To reset some of the menu settings to their original values, select Menu > Settings >

Restore factory settings and enter the security code. Data that you have entered

or downloaded is not deleted. For example, names and numbers in Contacts are

not affected.

O p e r a t o r m e n u

11. Operator menu

Your service provider may have programmed an operator-specific menu into your

phone. If this menu exists in your phone, its functions depend entirely upon the

service provider. Contact your service provider for more information.

G a l l e r y

12. Gallery

In this menu, you can manage graphics, images, recordings, and

tones. These files are arranged in folders.

Your phone supports an activation key system to protect acquired

content. Always check the delivery terms of any content and

activation key before acquiring them, as they may be subject to a fee.

The files stored in the Gallery use a memory that may have a capacity of

approximately 52 MB in the phone.

1. Select Menu > Gallery.

The original folders in the Gallery are: Images, Video clips, Music files,

Themes, Graphics, Tones, Recordings, and Received files.

2. Scroll to the folder you want, select Open, scroll to an image, tone or voice

recording, select Options and one of the following options may be available:

Downloads, Delete folder, Move, Rename folder, Details, Type of view,

Sort, Add folder, Memory status, and Activation key list.

3. Scroll to the file you want to view and select Open.

4. Select Options, and use one of the following functions that may be available

for the selected file: Downloads, Delete, Move, Rename, Apply theme, Set

as wallpaper, Set as ring tone, Details, Type of view, Sort, Add folder, or

Memory status.

The following options are also available:

Send — to send the selected file using MMS or Bluetooth wireless technology.

Delete all — to delete all the files and folders in the selected folder.

Edit image — to insert text, a frame, or clip-art into the selected picture, or to

crop the image.

Open in sequence — to view the files in the folder one by one.

Zoom — to increase the size of the image.

Mute audio (Unmute audio) — to mute (unmute) the sound file.

Set contrast — to adjust the contrast level of the image.

Activate content — to update the activation key of the selected file. The

option is only shown if the activation key update is supported by the file.

Activation key list — to view the list of all available activation keys. You can

delete expired keys.

M e d i a

13. Media

■Camera

You can take photos or record video clips with the built-in camera. The

camera produces pictures in JPEG format and video clips in 3GP format.

When taking and using images or video clips, obey all laws and respect

local customs, as well as privacy and legitimate rights of others.

Take a photo

1. Select Menu > Media > Camera > Capture.

The phone saves the photo in Gallery > Images.

2. To take another photo, select Back.

3. To send the photo as a multimedia message, select Send.

4. To view the options, select Options.

Record a video clip

Select Menu > Media > Camera. To select the video mode, scroll left or right, or

select Options > Video, and select Record. To pause the recording, select Pause;

to resume the recording, select Contin. To stop the recording, select Stop. The phone

saves the recording in Gallery > Video clips. To view the options, select Options.

■Media player

With the media player you can view, play, and download files, such as images,

audio, video and animated images. You can also view compatible streaming

videos from a network server (network service).

Select Menu > Media > Media player > Open gallery, Bookmarks, Go to

address, or Media downloads.

When pressing the navigation key right (fast forward button) or the navigation

key left (rewind button), select FF/rew interval to set the length of a scrolling

jump during streaming audio.

Set for streaming service

You may receive the configuration settings required for the streaming as a

configuration message from the network operator or service provider. See

"Configuration settings service" on page 9. To enter the settings manually, see

"Configuration" on page 51.

M e d i a

Select Menu > Media > Media player > Streaming settings and one of the

following options:

Configuration — only the configurations that support streaming are shown.

Select a service provider, Default, or Personal config..

Account and a streaming service account contained in the active

configuration settings.

■Music player

Your phone includes a music player for listening to music tracks, recordings, or

other MP3 or AAC sound files that you have transferred to the phone with the

Nokia Audio Manager application. Music files are automatically detected and

added to the default track list.

Play music tracks

1. Select Menu > Media > Music player. The details of the first track on the

default track list are shown.

2. To play a track, scroll to the track that you want, and select .

3. To skip to the beginning of the next track, select . To skip to the beginning

of the previous track, select twice.

4. To rewind the current track, select and hold . To fast forward the current

track, select and hold . Release the key at the position you want.

5. To stop the playing, select .

Warning: Listen to music at a moderate level. Continuous exposure to

high volume may damage your hearing. Do not hold the device near

your ear when the loudspeaker is in use, because the volume may be

extremely loud.

Settings

In the Music player menu, the following options may be available:

•Volume — to change the volume level, press the navigation key left or right.

•Play via bluetooth — to make a connection to an audio enhancement using a

Bluetooth connection.

•Track list — to view all the tracks available on the track list. To play a track, scroll

to the track you want, and select Play. Select Options > Refresh all tracks or

Change track list — to refresh the track list (for example, after adding new

tracks to the list) or change the track list that is shown when you open the

Music player menu, if several track lists are available in the phone.

M e d i a

4. Select Options and one of the following options:

•Turn off — to turn off the radio.

•Volume — to change the volume level by pressing the navigation key left

or right.

•Save channel — to save a new channel by entering the channel’s name.

•Channels — to select the list of saved channels. To delete or rename a

channel, scroll to the channel you want, and select Options > Delete

channel or Rename.

•Loudspeaker or Headset — to listen to the radio using the loudspeaker or

headset. Keep the headset connected to the phone. The lead of the headset

functions as the radio antenna.

•Set frequency — to enter the frequency of the radio channel you want.

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or

receiving data, it may interfere with the radio.

■ Recorder

You can record pieces of speech, sound, or an active call. This is useful when

recording a name and phone number for writing them down later.

The recorder cannot be used when a data call or GPRS connection is active.

Record sound

1. Select Menu > Media > Recorder.

2. To start the recording, select . To start the recording during a call, select

Options > Record. While recording a call, all parties to the call hear a faint

beeping sound approximately every five seconds. When recording a call, hold

the phone in the normal position near to your ear.

3. To end the recording, select .

The recording is saved in Gallery > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using Bluetooth, or as a multimedia message,

select Options > Send last recorded.

O r g a n i z e r

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the day notes, select View. To view a week, select

Options > Week view. To delete all notes in the calendar, select the month or

week view, and select Options > Delete all notes.

Other options for the calendar day view can be make a note; delete, edit, move, or

repeat a note; copy a note to another day; send a note with Bluetooth technology;

or send a note as a text message or multimedia message to the calendar of another

compatible phone. In Settings, you can set the date and time settings. In the

Auto-delete notes option, you can set the phone to delete old notes automatically

after a specified time.

Make a note

1. Select Menu > Organizer > Calendar and the date you want.

2. Select Options > Make a note and one of the following note types:

Meeting, Call, Birthday, Memo or Reminder.

Note alarm

The phone beeps, and displays the note. If a call note appears, you can call the

displayed number by pressing the call key. To stop the alarm and to view the note,

select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm

without viewing the note, select Exit.

■ To-do list

You can save a note for a task that you have to do, select a priority level for the

note, and mark it as done when you have completed it. You can sort the notes by

priority or by date.

Add a to-do note

1. Select Menu > Organizer > To-do list.

2. If no note is added, select Add; otherwise, select Options > Add.

3. Write the note, and select Save, the priority, the deadline and the alarm type

for the note.

4. To view a note, scroll to it, and select View.

Options

You can also select an option to delete the selected note and delete all the notes

that you have marked as done. You can sort the notes by priority or by deadline,

send a note as a text message or a multimedia message to another phone, save a

note as a calendar note, or access the calendar.

O r g a n i z e r

While viewing a note, you can also select an option to edit the deadline or priority

for the note, or mark the note as done.

■ Notes

You can use this function for writing and sending notes to compatible devices by

Bluetooth, SMS, or MMS.

1. Select Menu > Organizer > Notes.

2. To make a note if one is not added, select Add; otherwise, select Options >

Make a note.

3. Write the note, and select Save.

4. To view a note, scroll to it, and select View.

Options

Other options for notes include deleting and editing a note. While editing a note,

you can also exit the text editor without saving the changes. If the note is too long

to be sent as a text message, the phone prompts you to delete the appropriate

number of characters from your note.

■ Wallet

In Wallet, you can save personal information, such as credit card numbers, addresses,

and access codes to services that require a user name and password. You can easily

retrieve the information in the wallet to fill in online forms, if the service supports it.

The first time you access the wallet, you must define the wallet code that protects

your encrypted data.

1. When Create wallet code: appears, enter the code, and select OK.

2. When Verify wallet code: appears, enter the code again, and select OK. See

"Wallet code" on page 18.

3. If you want to delete all the content of the wallet and the wallet code, enter

* *#7370925538# ( #res wallet# in letters) while in the standby mode. You

also need the security code of the phone. See "Security code" on page 17.

4. To add or edit contents, open the Wallet menu. To use the content of the wallet

in a mobile service, access the wallet from the browser. See "Web" on page 71.

Access the menu

1. Select Menu > Organizer > Wallet, enter your wallet code, and select OK.

O r g a n i z e r

2. Select one of the following options:

Wallet profiles — to create card combinations for different services. A wallet

profile is helpful if the service asks you to fill in many data items. You can select

the appropriate wallet profile instead of selecting different cards separately.

Cards — to save personal card information. You can save payment, loyalty, and

access card information, such as user name and password combinations for

different services, addresses, and user data. See "Save card details" on page 64.

Tickets — to save the notifications of e-tickets that you bought through a

mobile service. To view the tickets, select Options > View.

Receipts — to save receipts of mobile purchases.

Personal notes — to save all kinds of personal information that you want to

keep protected by the wallet PIN code. See "Personal notes" on page 64.

Settings — to modify wallet settings. See "Create a profile" on page 65.

Save card details

1. Select Menu > Organizer > Wallet, enter your wallet code, and select OK.

2. Select Cards and either Payment cards, Loyalty cards, Access cards, User

info cards, or Address cards.

3. If no card is added, select Add; otherwise, select Options > Add new and fill

in the card detail fields.

If supported by your service provider, you can also receive card information to

your phone as a configuration message. You are notified of the card category. For

availability of receiving card information as configuration settings, contact the

card issuer or service provider.

Personal notes

You can save personal notes, such as account numbers, passwords, or codes.

1. Select Menu > Organizer > Wallet, enter your wallet code, and select OK >

Personal notes.

2. If no note is added, select Add; otherwise, select Options > Add new and

enter the note and a title.

3. Select Options to edit a selected note, sort notes by name or date, or delete notes.

4. To view a note, scroll to it, and select View.

O r g a n i z e r

3. To set the radio frequency identification (RFID) code and type, select RFID >

RFID code and RFID type.

RIFD is a method of remotely storing and retrieving data using devices called RFID

tags. This technology offers a secure way to protect your commercial transactions.

Purchases (network service)

To do your shopping, access a Web site that supports the wallet. The service must

support the Electronic Commerce Modeling Language specification. See "Connect

to a service" on page 72. Choose the product you want to buy and read carefully

all provided information before your purchase. The text may not fit within a

single screen. Therefore, make sure to scroll through and read all of the text

before your purchase.

To pay for the items you want to buy, you are asked whether you want to use the

wallet and your wallet PIN code.

1. Select the payment card you want to use from the Payment cards list.

If the data form you receive from the service provider supports the Electronic

Commerce Modeling Language specification, the phone automatically fills in

the credit card information or the wallet profile from the wallet.

2. Approve the purchase, and the information is forwarded.

You may receive an acknowledgement or a digital receipt of the purchase.

3. To close the wallet, select Close wallet.

If you do not use the wallet for five minutes, it closes automatically.

4. If you have tried to access or have accessed confidential information requiring

passwords (for example, your bank account), empty the cache of your phone after

each use. See "Cache memory" on page 75 for more information.

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root, and converts currency values.

Note: This calculator has limited accuracy and is designed for simple

calculations.

O r g a n i z e r

Basic calculations

1. Select Menu > Organizer > Calculator and enter the first number in the

calculation. If you need to enter a decimal point, press #.

2. Select Options > Add, Subtract, Multiply, Divide, Square, Square root, or

Change sign.

3. Enter the second number in your calculation, and select Equals.

4. To start a new calculation, select and hold Clear.

Currency conversion

1. Select Menu > Organizer > Calculator.

2. To save the exchange rate, select Options > Exchange rate.

3. Select the displayed options you want, enter the exchange rate, press # for a

decimal point, and select OK.

The exchange rate remains in the memory until you replace it with another one.

4. To perform the currency conversion, enter the amount to be converted, select

Options > To home or To foreign.

■ Countdown timer

1. Select Menu > Organizer > Countdown timer, enter the alarm time in

hours, minutes, and seconds, and select OK.

You can write your own note text, which will display when the time expires.

2. To start the countdown timer, select Start.

3. To change the countdown time, select Change time.

4. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone

sounds a tone and flashes the note text (if it is set) or Countdown completed.

Stop the alarm by pressing any key. If no key is pressed, the alarm automatically

stops within 30 seconds. To stop the alarm and to delete the note text, select Exit.

To restart the countdown timer, select Restart.

O r g a n i z e r

■ Stopwatch

You can measure time, take intermediate times, or take lap times using the

stopwatch. During timing, the other functions of the phone can be used. To set

the stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other

features increases the demand on battery power and reduces the battery life.

Select Menu > Organizer > Stopwatch and one of the following options:

•Split timing — to take intermediate times.

• To start the time observation, select Start.

• Select Split every time you want to take an intermediate time.

• To stop the time observation, select Stop.

• To save the measured time, select Save.

• To start the time observation again, select Options > Start. The new time

is added to the previous time.

• To reset the time without saving it, select Reset.

• To set the stopwatch timing in the background, press the end key.

•Lap timing — to take lap times. To set the stopwatch timing in the

background, press the end key.

•Continue — to view the timing that you have set in the background.

•Show last time — to view the most recently measured time if the stopwatch

is not reset.

•View times or Delete times — to view or delete the saved times.

A p p l i c a t i o n s

15. Applications

■ Games

Your phone software includes some games.

Launch

Select Menu > Applications > Games, scroll to the game you

want, and select Open, or press the call key.

For options related to a game, see "Other application options" on page 69.

Downloads

Select Menu > Applications > Options > Downloads > Game downloads. The

list of available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Web menu. See "Bookmarks" on page 74.

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

Settings

To set sounds, lights, and shakes for the game, select Menu > Applications >

Options > Application settings.

■ Collection

Your phone software includes some Java applications specially designed for this

Nokia phone.

Launch an application

Select Menu > Applications > Collection, scroll to an application, and select

Open, or press the call key.

Other application options

Delete — to delete the application or application set from the phone.

Details — to give additional information about the application.

Update version — to check if a new version of the application is available for

download from the Web (network service).

A p p l i c a t i o n s

Web page — to provide further information or additional data for the application

from an Internet page. This feature must be supported by the network. It is only

shown if an Internet address has been provided with the application.

Application access — to restrict the application from accessing the network.

Different categories are shown. Select in each category, if available, one of the

following permissions:

•Ask every time and the phone asks always for net access.

•Ask first time only and the phone asks on first attempt to net access.

•Always allowed to allow the net access.

•Not allowed to not allow the net access.

Download applications (network service)

Important: Only install and use applications and other software

from sources that offer adequate security and protection against

harmful software.

Your phone supports J2ME Java applications. Make sure that the application is

compatible with your phone before downloading it.

You can download new Java applications in different ways:

Select Menu > Applications > Options > Downloads > App. downloads, and

the list of available bookmarks is shown. Select More bookmarks to access the

list of bookmarks in the Web menu. Select the appropriate bookmark to connect

to the page you want. For the availability of different services, pricing, and tariffs,

contact your service provider.

Select Menu > Web > Downloads. Download an appropriate application or

game. See "Downloads" on page 69.

Use the game download function. See "Downloads" on page 69.

Use the Nokia Application Installer from Nokia PC Suite to download the

applications to your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

Internet site.

When downloading an application, it may be saved in the Games menu instead of

the Applications menu.

W e b

16. Web

Your phone has a built-in browser you can use to connect to

selected services on the mobile Internet. Many wireless mobile

Internet access features are network-dependent, and some

features may not be available. Contact your service provider for

more information.

■ Technology background

A technology called Wireless Application Protocol (WAP) is to mobile devices what

the World Wide Web (WWW) is to personal computers. The mobile community began

developing WAP several years ago to provide access to the Internet for mobile users.

Most WAP sites are made up of text and hyperlinks. Some pages even contain

low-resolution graphics, or require data input. Your service provider and others

are free to design WAP sites as they choose, so the sites are as varied as the web

pages on the Internet.

Internet content on your personal computer is called a “web page.” Internet

content on your mobile phone is called a “page,” “WAP card,” or a “Deck of cards.”

You may not be able to view all the details of the mobile Internet pages, as page

appearance may vary due to screen size.

■ Service provider

Because mobile Internet content is designed to be viewed from your phone, your

service provider is now your mobile Internet service provider as well. It is likely

that your service provider has created a home page and set up your WAP browser

to go to this page when you log on to the mobile Internet. Once at your service

provider’s home page, you may find links to a number of other sites.

■ Access service

Set up service

You may receive the configuration settings required for browsing as a configuration

message from the network operator or service provider that offers the service that

you want to use. See "Configuration settings service" on page 9. You can also

enter all the configuration settings manually. See "Configuration" on page 51.

W e b

Options

The following options may be available: Use wallet info, Home, Shortcuts, Add

bookmark, Bookmarks, Page options, History, Downloads, Other options,

Reload, and Quit. Your service provider may also offer other options.

Direct calling

The browser supports functions that you can access while browsing. You can

make a phone call or save a name and a phone number from a page.

Appearance settings

While browsing, select Options > Other options > Appearance settings; or in

the standby mode, select Menu > Web > Settings > Appearance settings and

one of the following options:

Text wrapping > On — to set the text to continue on the next line in the display.

If you select Off, the text is abbreviated.

Font size > Extra small, Small, or Medium — to set the font size.

Show images > No — to hide pictures on the page. This can speed up the

browsing of pages that contain a lot of pictures.

Alerts > Alert for unsecure connection > Yes — to set the phone to alert when

a encrpyted connection changes to an unencrpyted one during browsing.

Alerts > Alert for unsecure items > Yes — to set the phone to alert when a

encrpyted page contains an unsecure item. These alerts do not guarantee a

secure connection. For more information, see "Browser security" on page 75.

Character encoding > Content encoding — to select the encoding for the

browser page content.

Character encoding > Unicode (UTF-8) web addresses > On — to set the

phone to send a URL as a UTF-8 encoding. You may need this setting when you

access a Web page created in a foreign language.

A cookie is data that a site saves in the cache memory of your phone. Cookies are

saved until you clear the cache memory. See "Cache memory" on page 75.

While browsing, select Options > Other options > Security > Cookie settings;

or in the standby mode, select Menu > Web > Settings > Security settings >

Cookies. To allow or prevent the phone receiving cookies, select Allow or Reject.

W e b

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The

phone supports WML scripts.

1. While browsing, select Options > Other options > Security settings >

Script settings; or in the standby mode, select Menu > Web > Settings >

Security settings > Scripts over secure connection.

2. To allow the scripts, select Allow.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select

Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it; or press the call key to make a connection

to the page associated with the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; create a new

bookmark; or save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

Internet site.

Receive

When you have received a bookmark that is sent as a bookmark, 1 bookmark

received is displayed. To save the bookmark, select Show > Save. To view or

delete the bookmark, select Options > View or Delete. To discard the bookmark

directly after you have received the bookmark, select Exit > OK.

■ Downloads (network service)

To download more tones, images, games, or applications to your phone, select

Menu > Web > Downloads > Tone downloads, Graphic downloads, Game

downloads, Video downloads, Theme downloads, or App. downloads.

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

To save all downloaded files automatically in Gallery, select Menu > Web >

Settings > Downloading settings > Automatic saving > On.

W e b

■ Service inbox (network service)

The phone is able to receive service messages (pushed messages) sent by your service

provider. Service messages are notifications of news headlines, for example, and

they may contain a text message or an address of a service.

To access the Service inbox in the standby mode, when you have received a service

message, select Show. If you select Exit, the message is moved to the Service

inbox. To access the Service inbox later, select Menu > Web > Service inbox.

To access the Service inbox while browsing, select Options > Other options >

Service inbox. Scroll to the message you want, and select Retrieve to activate the

browser and download the marked content. To display detailed information on the

service notification, or to delete the message, select Options > Details or Delete.

Settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service message, select Service messages >

On or Off.

To set the phone to receive service messages only from content authors approved

by the service provider, select Message filter > On. To view the list of the approved

content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode

when the phone has received a service message, select Automatic connection >

On. If you select Off, the phone activates the browser only after you select Retrieve

when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed is

stored in the cache.

• To empty the cache, while browsing, select Options > Other options >

Clear the cache.

• To empty the cache, while in the standby mode, select Menu > Web >

Clear the cache.

■ Browser security

Security features may be required for some services, such as online banking or

shopping. For such connections, you need security certificates and possibly a

security module, which may be available on your SIM card. For more information,

contact your service provider.

W e b

Security module

The security module improves security services for applications requiring a browser

connection, and allows you to use a digital signature. The security module may

contain certificates as well as private and public keys. The certificates are saved

in the security module by the service provider.

Select Menu > Web > Settings > Security settings > Security module settings

and one of the following options:

Security module details — to show the security module title, status, manufacturer,

and serial number.

Module PIN request — to set the phone to ask for the module PIN when using

services provided by the security module. Enter the code, and select On. To disable

the module PIN request, select Off.

Change module PIN — to change the module PIN, if allowed by the security module.

Enter the current module PIN code, then enter the new code twice.

Change signing PIN — to change the signing PIN code for the digital signature.

Select the signing PIN you want to change. Enter the current PIN code, then enter

the new code twice.

See also "Access codes" on page 17.

Certificates

Important: Note that even if the use of certificates makes the risks

involved in remote connections and software installation considerably

smaller, they must be used correctly in order to benefit from increased

security. The existence of a certificate does not offer any protection by

itself; the certificate manager must contain correct, authentic, or trusted

certificates for increased security to be available. Certificates have a

restricted lifetime. If Expired certificate or Certificate not valid yet is

shown even if the certificate should be valid, check that the current

date and time in your device are correct.

Before changing any certificate settings, you must make sure that you

really trust the owner of the certificate and that the certificate really

belongs to the listed owner.

There are three kinds of certificates: server certificates, authority certificates, and

user certificates. You may receive these certificates from your service provider.

Authority certificates and user certificates may also be saved in the security

module by the service provider.

W e b

To view the list of the authority or user certificates downloaded into your phone,

select Menu > Web > Settings > Security settings > Authority certificates or

User certificates.

The security indicator is displayed during a connection, if the data transmission

between the phone and the content server is encrypted.

The security icon does not indicate that the data transmission between the gateway

and the content server (or place where the requested resource is stored) is secure.

The service provider secures the data transmission between the gateway and the

content server.

Digital signature

You can make digital signatures with your phone if your SIM card has a security

module. Using the digital signature can be the same as signing your name to a

paper bill, contract, or other document.

To make a digital signature, select a link on a page, such as the title of the book

you want to buy and its price. The text to sign, which may include the amount

and date, is shown.

Check that the header text is Read and that the digital signature icon is shown.

If the digital signature icon does not appear, there is a security breach, and you

should not enter any personal data such as your signing PIN.

To sign the text, read all of the text first, and then select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll through

and read all of the text before signing.

Select the user certificate you want to use. Enter the signing PIN (see "Access

codes" on page 17), and select OK. The digital signature icon disappears, and the

service may display a confirmation of your purchase.

S I M s e r v i c e s

17. SIM services

Your SIM card may provide additional services that you can access.

This menu is shown only if it is supported by your SIM card. The

name and contents of the menu depend on the SIM card.

For availability, rates, and information on using SIM services,

contact your service provider.

You can set the phone to show you the confirmation messages sent between your

phone and the network when you are using the SIM services by selecting the

option Yes within the menu Confirm SIM service actions, in Phone settings.

Note that accessing these services may involve sending messages or making a

phone call for which you may be charged.

E n h a n c e m e n t s

19. Enhancements

If you want to enhance phone functionality, a

range of enhancements is available for you. You

can select any of these items to help accommodate

your specific communication needs.

Check the model number of any charger before use

with this device. This device is intended for use

when supplied with power from the ACP-12 charger.

Warning: Use only batteries, chargers and enhancements approved by

Nokia for use with this particular model. The use of any other types may

invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer.

Your device and its enhancements may contain small parts. Keep them out of

reach of small children.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and

are operating properly.

• Installation of any complex car enhancements must be made by qualified

personnel only.

R e f e r e n c e i n f o r m a t i o n

20. Reference information

■ Battery information

Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal,

replace the battery. Use only Nokia approved batteries, and recharge your battery

only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do

not leave the battery connected to a charger. Overcharging may shorten its lifetime.

If left unused, a fully charged battery will lose its charge over time. Temperature

extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery

that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and

negative (-) terminals of the battery. (These look like metal strips on the battery.) This

might happen, for example, when you carry a spare battery in your pocket or purse.

Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery and its ability

to charge. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A

device with a hot or cold battery may not work temporarily, even when the battery

is fully charged. Battery performance is particularly limited in temperatures well

below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also

explode if damaged. Dispose of batteries according to local regulations. Please

recycle when possible. Do not dispose as household waste.

Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting

an original Nokia battery, purchase it from an authorized Nokia dealer, look for

the Nokia Original Enhancements logo on the packaging, and inspect the hologram

label using the following steps:

R e f e r e n c e i n f o r m a t i o n

Successful completion of the four steps is not a total assurance of the authenticity

of the battery. If you have any reason to believe that your battery is not an authentic

original Nokia battery, you should refrain from using it and take it to the nearest

authorized Nokia service point or dealer for assistance. Your authorized Nokia

service point or dealer will inspect the battery for authenticity. If authenticity

cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. When looking at the hologram label, you should see

the Nokia connecting hands symbol from one angle

and the Nokia Original Enhancements logo when

looking from another angle.

2. When you angle the hologram. to the left, right,

down, and up sides of the logo, you should see

1, 2, 3, and 4 dots on each side respectively.

3. Scratch the side of the label to reveal a 20-digit

code, for example, 12345678919876543210.

Turn the battery so that the numbers are facing

upwards. The 20-digit code reads starting from the

number at the top row followed by the bottom row.

4. Confirm that the 20-digit code is valid by following

the instructions at www.nokia.com/batterycheck .

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram label is an

authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries visit www.nokia.com/battery

R e f e r e n c e i n f o r m a t i o n

■ Additional safety information

Operating environment

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. This device meets

RF exposure guidelines when used either in the normal use position against the

ear or when positioned at least 5/8 inch (1.5 cm) away from the body. When a carry

case, belt clip, or holder is used for body-worn operation, it should not contain

metal and should position the device at least 5/8 inch (1.5 cm) away from your

body.In order to transmit data files or messages, this device requires a quality

connection to the network. In some cases, transmission of data files or messages

may be delayed until such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device,

and persons with a hearing aid should not hold the device to the ear with the

hearing aid. Always secure the device in its holder, because metallic materials may

be attracted by the earpiece. Do not place credit cards or other magnetic storage

media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch

off your phone in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm)

be maintained between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research.

To minimize the potential for interference, persons with pacemakers should

• Always keep the device more than 6 in (15.3 cm) from their pacemaker when

the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker

R e f e r e n c e i n f o r m a t i o n

■ Emergency calls

Important: Wireless phones, including this phone, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless phone for

essential communications like medical emergencies.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid SIM card is properly inserted in the phone.

2. Press the end key as many times as needed to clear the display and ready the

phone for calls.

3. Enter the official emergency number for your present location. Emergency

numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. Consult this guide or your service provider.

When making an emergency call, give all the necessary information as accurately

as possible. Your wireless phone may be the only means of communication at the

scene of an accident. Do not end the call until given permission to do so.

■ Certification Information (SAR)

THESE MODEL PHONES MEET INTERNATIONAL GUIDELINES FOR EXPOSURE T

RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed and

manufactured not to exceed the limits for exposure to radio frequency (RF) energy

recommended by international guidelines (ICNIRP). These limits establish permitted

levels of RF energy for the general population. The guidelines are based on standards

that were developed by independent scientific organizations through periodic

and thorough evaluation of scientific studies. The standards and guidelines include

a substantial safety margin designed to assure the safety of the public, regardless

of age and health and to account for any variations in measurements.

The exposure guidelines for mobile devices employ a unit of measurement known

as the Specific Absorption Rate or SAR. The SAR limit stated in the international

guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue.

Tests for SAR are conducted using standard operating positions with the device

transmitting at its highest certified power level in all tested frequency bands.

R e f e r e n c e i n f o r m a t i o n

The actual SAR level of an operating device can be well below the maximum

value because the device is designed to use only the power required to reach the

network. That amount changes depending on a number of factors such as how

close you are to a network base station. The highest SAR value when tested

according to international testing procedures for use at the ear for device type

RM-13 is 0.50 W/kg and for device type RM-33 is 0.45 W/kg.

SAR values may vary depending on national reporting and testing requirements

and the network band. Use of device accessories and enhancements may result in

different SAR values. Additional SAR information may be provided under product

information at www.nokia.com.

USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged

over 1 gram of tissue. Device type RM-13 has also been tested against this SAR

limit. The highest SAR value reported under this standard during product

certification for use at the ear is 0.46 W/kg and when properly worn on the body

is 0.37 W/kg. Information about this device can be found on the FCC's website at

http://www.fcc.gov/oet/fccid by searching the equipment authorization system

using FCC ID: QTKRM-13.

Device type RM-33 has also been tested against this SAR limit. The highest SAR

value reported under this standard during product certification for use at the ear

is 0.64 W/kg and when properly worn on the body is 0.77 W/kg. Information about

this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid

by searching the equipment authorization system using FCC ID: QTKRM-33.

■ Charging, talk and standby times

This section provides information about battery charging times with the Travel

Charger (ACP-12), talk-times, and standby times. Be aware that the information in

this section is subject to change. For more information, contact your service provider.

Charging time

The following charging time is approximate with the BL-5X 600 mAh Li-Ion

internal fixed battery:

Travel Charger (ACP-12): up to 1 hour, 5 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use,

network conditions, features used, battery age and condition (including charging

habits), temperatures to which the battery is exposed, and many other factors.

Talk time: up to 2 hours, 40 minutes

Standby time: up to 200 hours

R e f e r e n c e i n f o r m a t i o n

■ Technical information

Dimensions:

• Width: 45mm

• Height: 107 mm

• Thickness: 16.5 mm

Weight: 141 gm

Wireless networks: EGSM 850, EGSM 900, GSM 1800 and EGSM1900

Size (volume): 67 cu cm

Frequency range (Tx) :

• EGSM 850: 824–849 MHz

• EGSM 900: 880–915 MHz

• GSM 1800: 1710–1785 MHz

• EGSM 1900: 1850–1910 MHz

Frequency range (Rx):

• EGSM 850: 869–894 MHz

• EGSM 900: 925–960 MHz

• GSM 1800: 1805–1880 MHz

• EGSM 1900: 1930–1990 MHz

Transmitter outpower:

• 2W (EGSM 900 max)

• 1W (GSM 1800/EGSM 1900 max)

Operating temperature: 14° F to + 131° F (-10° C to + 55° C)

C a r e a n d m a i n t e n a n c e

Care and maintenance

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage and enjoy your device for many years.

• Keep the device dry. Precipitation, humidity, and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery and allow the device to dry

completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor,

and light sensor lenses).

• Use chargers indoors.

• Always create a backup of data you want to keep (such as contacts and

calendar notes) before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger,

or any enhancement. If any device is not working properly, take it to the

nearest authorized service facility for service.

S t a t e m e n t s f r o m o t h e r a g e n c i e s

9. Use your wireless phone to help others in emergencies. Your wireless phone

provides you a perfect opportunity to be a "Good Samaritan" in your community.

If you see an auto accident, crime in progress or other serious emergency

where lives are in danger, call 9-1-1 or other local emergency number, as you

would want others to do for you.

10. Call roadside assistance or a special wireless nonemergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services.

But you still can use your wireless phone to lend a hand. If you see a broken-

down vehicle posing no serious hazard, a broken traffic signal, a minor traffic

accident where no one appears injured or a vehicle you know to be stolen, call

roadside assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard

to everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to

inform wireless phone users of their responsibilities as safe drivers and good citizens.

As we approach a new century, more and more of us will take advantage of the

benefits of wireless telephones. And, as we take to the roads, we all have a

responsibility to drive safely.The wireless industry reminds you to use your phone

safely when driving.For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85

■ Message from the FDA

The U.S. Food and Drug Administration (FDA) provides the following

consumer information about wireless phones.

See http://www.fda.gov/cellphones/ for updated information.

Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

S t a t e m e n t s f r o m o t h e r a g e n c i e s

What is FDA doing to find out more about the possible health effects of wireless

phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF). FDA has been a leading participant in the World Health

Organization International Electromagnetic Fields (EMF) Project since its inception

in 1996. An influential result of this work has been the development of a detailed

agenda of research needs that has driven the establishment of new research

programs around the world. The Project has also helped develop a series of public

information documents on EMF issues. FDA and the Cellular Telecommunications &

Internet Association (CTIA) have a formal Cooperative Research and Development

Agreement (CRADA) to do research on wireless phone safety. FDA provides the

scientific oversight, obtaining input from experts in government, industry, and

academic organizations. CTIA-funded research is conducted through contracts to

independent investigators. The initial research will include both laboratory studies

and studies of wireless phone users. The CRADA will also include a broad

assessment of additional research needs in the context of the latest research

developments around the world.

What steps can I take to reduce my exposure to radiofrequency energy from my

wireless phone?

If there is a risk from these products--and at this point we do not know that there

is--it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since the

exposure level drops off dramatically with distance. For example, you could use a

headset and carry the wireless phone away from your body or use a wireless

phone connected to a remote antenna

Again, the scientific data do not demonstrate that wireless phones are harmful. But if

you are concerned about the RF exposure from these products, you can use measures

like those described above to reduce your RF exposure from wireless phone use.

What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including

children and teenagers. If you want to take steps to lower exposure to radiofrequency

energy (RF), the measures described above would apply to children and teenagers

using wireless phones. Reducing the time of wireless phone use and increasing the

Index

NUMERICS

1-touch dialing 19

access codes 17

alarm clock 61

antenna 13

battery

charge 11

lock 11

strength indicator 15

bluetooth 46

bookmarks

browser 72

appearance settings 73

options 73

business cards 38

calendar 61

call

answer 19

counters 43

end 19

make 19

options 20

reject 19

timers 43

voice mail

waiting 19

camera 56

color schemes

contacts 37

add 37

copy 38

delete 38

edit 38

emergency calls 85

enhancements 47, 80

keyguard 17

automatic 50

security 50

media player 56

functions 21

message counter 36

messages

info

multimedia 25

text 22

voice

music player

my shortcuts 46

Network Services 6

Nokia PC Suite

NOTES

Manual del Usuario

Nokia 8800 y Nokia 8801

9232467

Edición 1_draft07

Importante: Para prevenir cualquier malfuncionamiento y evitar daños, lea

detalladamente este manual de instrucciones antes de conectar y operar

este aparato. Conserve el manual para referencias futuras.

Produkt Specifikationer

Mærke:	Nokia
Kategori:	Mobil
Model:	8800

Har du brug for hjælp?

Hvis du har brug for hjælp til Nokia 8800 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mobil Nokia Manualer

Nokia C1-02 Manual

6 Juli 2024

Nokia 2710 Manual

6 Juli 2024

Nokia 5730 xpressmusic Manual

6 Juli 2024

6 Juli 2024

6 Juli 2024

5 Juli 2024

5 Juli 2024

5 Juli 2024

Nokia 215 Dual SIM Manual

5 Juli 2024

Nokia n97 Manual

5 Juli 2024

Mobil Manualer

Nyeste Mobil Manualer

Swissvoice mp01 Manual

12 Januar 2025

Geemarc CL8360 Manual

11 Januar 2025

HTC P3300 Manual

11 Januar 2025

Alcatel IP Touch 600 Manual

21 December 2024

Sanyo Katana II - Sprint Manual

17 December 2024

Swisstone SD 530 Manual

5 Oktober 2024

Emporia EUPHORIA 3G Manual

5 Oktober 2024

Emporia Telme C135 Manual

5 Oktober 2024

Ulefone Armor 3 Manual

5 Oktober 2024

Sunstech Arrow Manual

4 Oktober 2024