Preface> 2
P
REFACE
Every effort has been made to ensure that the information in this
document is complete, accurate, and up-to-date. The manufacturer
assumes no responsibility for the results of errors beyond its control.
The manufacturer also cannot guarantee that changes in software
and equipment made by other manufacturers and referred to in this
guide will not affect the applicability of the information in it. Mention
of software products manufactured by other companies does not
necessarily constitute endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate
and helpful as possible, we make no warranty of any kind, expressed or implied,
as to the accuracy or completeness of the information contained herein.
The most up-to-date drivers and manuals are available from the Oki web site:
http://www.okiprintingsolutions.com
Copyright © 2016 All rights reserved.
OKI is a registered trademark of Oki Electric Industry Co., Ltd.
Oki Printing Solutions is a registered trademark of Oki Data Corporation.
Microsoft, MS-DOS and Windows are registered trademarks of
Microsoft Corporation.
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Inc.
Other product names and brand names are registered trademarks or
trademarks of their proprietors.
This product complies with the requirements of the Council
Directives 2004/ 108/EC (EMC), 2006/95/EC (LVD),1999/5/EC
(R&TTE), 2009/125/EC (ErP) and 2011/65/EU(RoHS), as
amended where applicable, on the approximation of the laws of
the member states relating to Electromagnetic Compatibility,
Low Voltage, Radio & Telecommunications Terminal Equipment,
Energy related Products and Restriction on the use of certain
Hazardous Substances in electrical and electronic equipment.
The following cables were used to evaluate this product to achieve
EMC directive 2004/108/EC compliance and configurations other
than this may affect that compliance.
CAUTION!
This product complies with EN55022 Class B. However,
when fitted with the optional finisher, compliance to
EN55022 is Class A. In a domestic environment this
configuration may cause radio interference, in which case
the user may be required to take adequate measures.
CABLE TYPE
LENGTH (METRE)
CORE SHIELD
Power 1.8
USB 5.0
Parallel 1.8
LAN 15.0
