Telephone: 1300 11 HELP (4357)
Email: support@residentiagroup.com.au
Product Dimensions (W, D, H mm): 470 × 475 × 840
• Remove all packaging, including foam backing
and tape securing shelves.
• Before use, wipe all parts of the unit with a warm,
soapy cloth, and rinse and dry thoroughly. Place all
parts back in the appliance after cleaning.
• Allow the refrigerator to stand for 24 hours
before powering on to ensure proper settling
of the compressor oil for normal operation.
• When you first switch on the unit, the compressor
will run continuously for about 3–4 hours until the
Beverage Centre reaches the set temperature.
During this period of time, try not to open the door
frequently or place bottles inside the appliance.
Positioning Your Beverage Centre
• The Beverage Centre should be positioned on a
stable, solid, level surface to ensure the appliance
operates efficiently and safely.
• Keep the Beverage Centre away from damp areas or
heat sources and the refrigerator doors can open fully
without making contact with the cabinet sides, doors,
panels or other obstructions.
• To allow for proper air ventilation, leave a minimum
5cm of space between the top, rear and sides of the
appliance to allow sufficient cooling of the condenser.
• Be sure to leave enough space for the door opening
to avoid damage to the appliance or personal injury.
• Ensure the mains connection is easily accessible.
• The temperature range is 0° – 22°C.
• The preset temperature is 4°C (39°F).
• Adjust temperature in 1°C increments using the
Plus / Increase (+) or the Minus / Decrease (–)
adjustment buttons. The desired temperature will
flash during adjustment and will become set after
• To switch between Celsius and Fahrenheit
temperature display, press the Plus / Increase (+) and
the Minus / Decrease (–) buttons simultaneously
for 2 seconds. The display will update with the set
temperature symbol (°C/°F).
• Press the Light button to toggle the light on/off.
