Omega Pro 82004 Manual

Omega Skruemaskine Pro 82004

Læs gratis den danske manual til Omega Pro 82004 (7 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Omega Pro 82004, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

1” AIR IMPACT WRENCH

MODELS

82004

82004B

82004-M0_092017

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

SFA Companies

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read

to and discussed with the operator in the operator’s native language, making sure that the operator comprehends

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this

device, remove from service immediately.

Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be

made by an authorized repair facility. Labels and Operator’s Manuals are available from the manufacturer.

Product Description

This is a hand-held air powered impact wrench designed to be used by one operator for the tightening, loosening

or installing of threaded fasteners.

Specications

Item 82004, 82004B

Drive Size 1” Square

Max. Torque 2065 ft.-lbs.

Max. Pressure 140 PSI

Air Inlet 1/2”

Hose Size 1/2”

Operating Instructions

Note: Before use ensure that the air line is free of dust and moisture

1. Insert 1/2” air inlet nozzle (not included) to the port on the bottom of the handle. Use thread tape (not

included) on the nozzle to ensure a good connection. If a poor connection is made between the inlet nozzle

and the air tool, performance may be affected.

2. Attach a socket of the correct size to the anvil.

! : Attach socket to anvil prior to connecting tool to air pressure. Accidental trigger pull could result in Caution

personal injury

3. Before connecting the air hose to the air inlet nozzle, apply 4 or 5 drops of pneumatic oil into the air inlet. Attach

air hose to the air inlet nozzle. The max. air pressure to be used is 140 psi. and the air compressor regulator

should never be set above 140 psi. doing so could result in damage to the tool.

Note: It is recommended to have an air lter, regulator and lubricator in-line between the compressor and air tool. If

a lubricator is not used, lubricate the air motor every 3 or 4 hours of operation.

Note: To reverse direction, press the speed regulator dial side to side.

Produkt Specifikationer

Mærke:	Omega
Kategori:	Skruemaskine
Model:	Pro 82004

Har du brug for hjælp?

Hvis du har brug for hjælp til Omega Pro 82004 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Omega Manualer

Omega Pro 82004 Manual

21 Maj 2023

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Milwaukee M12 BLIDRC Manual

16 Juni 2025

RYOBI FVD01 Manual

16 Juni 2025

Milwaukee M18 BLHIWF12 Manual

16 Juni 2025

Draper D20 55375 Manual

16 Juni 2025

Milwaukee M12 BLDDRC Manual

16 Juni 2025

Draper Storm Force 89518 Manual

8 Juni 2025

Draper 83745 Manual

8 Juni 2025

Draper 70332 Manual

8 Juni 2025

Draper 70260 Manual

7 Juni 2025

Draper D20 99250 Manual

7 Juni 2025