OptiTrack Active BaseStation Manual

OptiTrack Ikke kategoriseret Active BaseStation

Læs gratis den danske manual til OptiTrack Active BaseStation (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om OptiTrack Active BaseStation, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
BaseStaon
This page provides specicaons for BaseStaons and informaon about their use.
The BaseStaon is the acve hardware component that links other acve components to Move. Using a radio
frequency channel (RF channel) between 11-26, the BaseStaon synchronizes OpTrack cameras with Acve Tags and
Pucks. Once the BaseStaon receives the signal from the acve component, it sends that data to the Move computer
along the camera network. This allows Move to recognize Acve Pucks and Tags even with signicant occlusion of the
LED markers, as compared to passive markers.
If you use Acve Tags or Pucks, at least one BaseStaon is required per tracking system.
BaseStaon Specications
BaseStaon Load Capacity
The number of IMUs that can aach to a BaseStaon is determined by the system frame rate and the divisor applied to
the BaseStaon. The table below shows the IMU maximum for common frame rates with a divisor rate of 1, 2, and in
some cases 3.
FrameRate
Divisor Rate 1
Divisor Rate 2
Divisor Rate 3
60
26
54
83
70
22
47
71
80
19
39
62
90
16
36
54
100
14
32
49
110
13
29
44
120
11
26
40
130
10
24
140
9
22
34
150
9
20
160
8
19
30
170
7
17
180
7
16
26
190
6
15
200
6
14
23
210
5
14
220
5
13
21
230
5
12
240
4
11
18
250
4
11
As noted, the table does not include all possible frame rate and divisor combinaons. If you are familiar with using Tera
Term or , you can determine the maximum number of IMUs for any specic frame rate and divisor combinaon PuTTy
not shown on the table.
1. Use PuTTy to change the divisor rate on the BaseStaon.
2. Connect an IMU puck to PuTTy.
3. Aempt to set the ID of the puck to an unrealiscally high value. This triggers a warning that includes the
current number of slots available for the given frame rate.
4. Set the IMU puck ID to the highest available slot for the frame rate and conrm that it appears in Move.
BaseStaons have 16 radio frequency (RF) channels available for use (11-26). When adding more than one BaseStaon
to a system, the IMU count is simply the maximum number of IMUs mulplied by the number of BaseStaons (up to 16).
For example, in a system with 4 BaseStaons running at 90Hz and a divisor rate of 3, the number of allowable IMUs
would be 216 (54*4=216).
Congure the BaseStaon
As shipped, BaseStaons will connect to the OpTrack system without addional conguraon by the user. Some
circumstances may require a conguraon update, such as when adding new BaseStaons to an exisng system or when
you wish to change the divisor rate.
The BaseStaon is congured outside of Move, using one of the following programs:
Acve Batch Programmer
PuTTy
Please see the linked pages for more details on conguring the BaseStaon.
BaseStaon LEDs

Produkt Specifikationer

Mærke: OptiTrack
Kategori: Ikke kategoriseret
Model: Active BaseStation

Har du brug for hjælp?

Hvis du har brug for hjælp til OptiTrack Active BaseStation stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret OptiTrack Manualer

OptiTrack

OptiTrack Active BaseStation Manual

15 Juli 2025
OptiTrack

OptiTrack eSync 2 Manual

7 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Levenhuk

Levenhuk Zeno Handy ZH17 Manual

15 Juli 2025
Tecno

Tecno Camon 18P Manual

15 Juli 2025
Rockville

Rockville RVSS4A BAG Manual

15 Juli 2025
Scanstrut

Scanstrut DS16-SL Manual

15 Juli 2025
Bender

Bender CTAC35 B98110007 Manual

15 Juli 2025
Zoom

Zoom 607 Manual

15 Juli 2025
Levenhuk

Levenhuk Zeno Handy ZH5 Manual

15 Juli 2025
DS18

DS18 RY-KIT4.HD Manual

15 Juli 2025
Baldwin

Baldwin 0113402 Manual

15 Juli 2025
DS18

DS18 CF-X6TP.NS Manual

15 Juli 2025