Oricom 02SD Manual

Oricom Baby-produkt 02SD

Læs gratis den danske manual til Oricom 02SD (2 sider) i kategorien Baby-produkt. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Oricom 02SD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1Oricom Digital Bath/Room Thermometer 20170727

Digital Bath & Room Thermometer

User Guide

PLEASE READ THIS USER GUIDE BEFORE INITIAL USE, . AND MUST BE RETAINED FOR FUTURE REFERENCE

The Oricom Digital B & Room ermometer designed to itoath Th is mon r the temperature baby’s bath or room to us as a fun ba of and e th toy for babies f all o ages.

Using your Oricom Bath or Room Thermometer

Ideal bathwater temperatures should be between 36.5°C and 38°C. A temperature higher than 39°C may cause scalds or burns.

 This thermometer measures water temperature between 0°C and 50°C.

 To activate, press the “on/set” button on the underside of the unit or place in water for automatic turn on.

 Wait 10 seconds, the digital screen will display temperature when the thermometer is on and ready for operation.

 Place the thermometer in bath water as the tub is being filled. Mix the water thoroughly whilst taking the temperature.

 Temperature alert function – LED light illuminates when water temperature is 39°C or over.

 Auto after shut off-30 mins to ve attery er. sa b pow

 The thermomet w cont to re-check adjust er ill inue and to show ambient room and water temperature every 10 seconds when turned on.

Change High Temperature Alert Settings

High temperature alert is preset to 39°C, but you can choose to change the setting between 37-40°C.

Press and hold “on/set” button on underside of unit for 2 seconds.

Press “+” button to set the desired alert temperature.

If water temperature is above the high temperature setting a RED light will flash. A green light will flash when water is below 30°C.

NOTE: This feature is only l when thermometer is the water. functiona in

Change from Celsius to Fahrenheit

Press the “C/F” b on the underside of the utton unit to it . change from lsius to Fahrenhe Ce (Default setting is Celsius)

How to BReplace the atteries

 The batter can be acce by removing the screw on the underside ies ssed of the thermometer

and then turning the cover in an anti-clockwise direction, a quarter tu until it isrn, loose.

 Carefully remove the atter insert 2 new LR44 batteries bies and

with the markings face up. Note: Do not mix old and new batteries or different brands of batteries.

 Please ensure the white rubber “O” ring , replace t cover is inserted correctly he turning clockwise a quarter turn and secure the screw into place. Do not short-out

connecting terminals whilst changing batteries.

CAUTION: This produ is only to be used in water w assembledct hen and operated instructions. If in accordance with the the battery cover

is not fitted correctly seal will not be water proof and water will enter the product and result in damage. then the

Batteries esent a hazard to the environment! repr health and

 They contain toxic, ecologically hazardous heavy metals. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local

regulations, never in your household rubbish.

 Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If a battery leaks, do not let the battery liquid touch skin or eyes. If this

happens, immediately flush the affected areas with water, and seek medical assistance.

 Do not modify, remanufacture, and attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may

explode if damaged. Always remove exhausted batteries from the product.

 Use only the same type of battery supplied with the product. Improper use or use of unapproved batteries may present a risk of fire, explosion, or other

hazard, and may invalidate any approval or warranty.

 If you believe the batteries are damaged stop using the product. Contact Oricom for assistance. Never use a damaged battery.

Need help?

If you need assistance tting up or our Thermo se using y meter call the Oricom Support team on 1300 889 785.

 If the unit will not turn on, the batter will need replacing.ies

If you’re changing a button battery, ensure it is changed on a surface out of reach of children. Make sure the

battery cover is secure so your child can’t remove it. Store button batteries like you would any medication –

out of reach of children.

 NOTE: When replacing the batteries keep all items includ ng the old batteries, screw, "O" ringi

and cover, out of reach of children as these items may cau e a choking hazard.s

CAUTION: Always check water temperature manually in addition to using this thermometer. Never leave children unattended in the

bathroom. There is no substitute for proper adult supervision.

Battery Safety

*WARNING – THIS PRODUCT CONTAINS BUTTON BATTER , KEEP OUT OF REACH OF CHILDREN.ALKALINE IES

If you suspect your child or has s wallowed inserted a button battery, immediately take them to a hospital emergency room. Do not give any food or water. If you find the

battery has leaked fluid please do not touch the battery or fluid. Dispose of the battery properly do not wrap in metal or aluminum foil, wrap in newspaper and dispose of carefully. Battery

may explode if burnt or exposed to excessive heat. Check your product regularly for damage and an exhausted battery. Make sure there are no loose batteries within any child’s reach.

Swallowing may slead to erious injury in as little

as or 2 hours death, due to c burnshemical and potential perforation of the oesophagus.

As well as attending hospital or seeing an emergency doctor, contact the 24-hour Poisons Information Centre on 26 13 11 for additional treatment

information. Examine devices and make sure the battery compartment is correctly secured.

• Dispose of used button batteries immediately a nd safely. Flat batteries can still be dangerous.

Tell others about the risk associated with button batteries and how to keep their children safe.

•



WARNING – THIS PRODUCT CONTAINS BUTTON ALKALINE

BATTERIES. KEEP BATTERIES OUT OF REACH OF CHILDREN.

This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after

referred to as “Oricom”.

Oricom products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major

failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail

to be of acceptable quality and the failure does not amount to a major failure.

Oricom warrants that the product is free from defects in materials or workmanship during the Express Warranty Period. This Express Warranty does not

extend to any product from which the serial number has been removed or was purchased outside of Australia.

Nothing in this Express Warranty excludes, restricts or modifies any condition, warranty, guarantee, implied term, right or remedy pursuant to the Australian

Consumer Law and which may not be so excluded, restricted or modified. For such conditions, terms, guarantees and warranties that cannot be excluded,

restricted or modified, Oricom limits the remedies available to extent permitted in the relevant legislation.

Except with respect to rechargeable battery cells and rechargeable battery packs (if supplied), the Express Warranty Period will be 12 months from the date

of purchase of the product evidenced by your dated sales receipt. You are required to provide proof of purchase as a condition of receiving Express

Warranty services. Rechargeable battery cells and rechargeable battery packs (if supplied) with this product are covered under this warranty for a period of 6

months.

You are entitled to a replacement product or repair of the product at our discretion according to the terms and conditions of this document if your product is

found to be faulty within the Express Warranty Period. This Express Warranty extends to the original purchaser only and is not transferable.

Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare

parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder

of the Express Warranty Period of the Oricom branded product in which they are installed, whichever is longer. During the Express Warranty Period, Oricom

will where possible repair and if not replace the faulty product or part thereof. All component parts removed under this Express Warranty become the

property of Oricom. In the unlikely event that your Oricom product has a recurring failure, Oricom may always, subject to the Competition and Consumer Act

2010, at its discretion, elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance.

No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom.

Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of

or in connection with a:

1. failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product;

2. wilful misconduct or deliberate misuse by you of the product;

3. any external cause beyond our control, including but not limited to power failure, lightning or over voltage; or

4. modification to the product or services carried out on the product by anyone other than Oricom or Oricom’s authorised service provider.

How to make a claim under your Express Warranty in Australia

Oricom has a simple warranty process for you to follow:

• Please call or email our Customer Support Team, 1300 889 785 or support@oricom.com.au.

• A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. If so, they will give you a

Product Return Authorisation number.

• We will then email or fax a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the goods for

warranty service.

Please note that if a Customer Support Team member advises that your product does not qualify for return, this warranty does not apply to your product.

Products that are authorised to be returned to Oricom in Australia must include all of the following:

• A completed Return Authorisation form

• A copy of your Proof of Purchase (please keep your original copy)

• The faulty product, including all accessories.

Send the approved returns to:

Oricom International Pty Ltd

Locked Bag 658

South Windsor NSW 2756 Australia

Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product to us. You must arrange and pay any expenses

incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to us, however, we will arrange delivery of

the repaired or replaced faulty product to you.

Important Information - Repair Notice

Please be aware that the repair of your goods may result in the loss of any user-generated data (such as stored telephone numbers, text messages and

contact information). Please ensure that you have made a copy of any data saved on your goods before sending for repair. Please also be aware that goods