OSD Audio Black NCR10 Manual

OSD Audio Ikke kategoriseret Black NCR10

Læs gratis den danske manual til OSD Audio Black NCR10 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om OSD Audio Black NCR10, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
R10 CEILING SUBWOOFER INSTALL GUIDE
BLACK R10 INSTALL GUIDE
NCR10 Bracket Installation - New Construction
NCR10 Construction Bracket Recommended:
NCR10 Bracket Installation - Retrot
Diagram 1:
Diagram 2:
Diagram 3:
The NCR10 is designed for new construction or retrot applications with it’s unique folding design. The NCR10 may be installed prior to
drywall or after across joists (from 16 - 24 on-center) where a speaker will be mounted.""
need to align the speaker to some other object or molding in the room,
be sure to consider the size of the bafe ange which extends beyond
the mounting hole.
2. Line up the bottom of one of the mounting bars with the bottom of
the joist. This will place the screw holes in an “L” position, ush with
the side of the joist, and the mounting ring “lip” will be facing down-
ward. Attach the mounting bar to the joist using appropriate wood
screws.
3. Make sure that the mounting ring is in a perfectly circular shape
( ) by opening the bracket until the arms come in con-see Diagram 1.
tact with the stoppers. Then, lineup the bottom of the other mounting
bar with the bottom of the same joist. Attach the mounting bar to the
joist using appropriate wood screws.
4. Extend both mounting bars to reach the opposite joist, then line up
the bottoms of each mounting bar with the bottom of the joist. Attach
the mounting bar to the joist using appropriate wood screws.
5. Adjust the position of the mounting ring between the joists, grab
both sides of the mounting ring, where it connects to the mounting bar,
then move the mounting ring to the desired position.
6. The protruding lip of the mounting ring will force the drywall install-
ers to hang the drywall with an appropriate hole cut out around the
mounting ring lip. After the drywall is hung and nished, the speakers
are then easily installed.
1. Find the joist nearest the desired speaker mounting location.
If you need to align the speaker to some other object or molding
in the room, be sure to consider the size of the bafe ange
which extends beyond the mounting hole.
2. Mark the hole using the speakers cut out template. Position
the template in the desired and pencil an outline on the ceiling.
3. Cut the hole. If you are not certain whether any CAUTION:
obstructions exist behind the mounting area, you should start by
cutting a small hole in the center of the penciled template outline
with a drywall saw, cutting at a 45° angle towards the inside of
the hole. ( ) Cutting a small hole at this angle will see Diagram 3.
make drywall repair easier if needed. If there are no obstructions
cut the nished hole at a 90° angle to the ceiling surface.
4. Collapse the mounting ring and the mounting bars to com-
press the bracket to it’s smallest shape (see Diagram 2.)
5. With the mounting lip facing downward, insert the bracket into
the ceiling cavity through the speaker cutout hole previously cut
in the drywall.
6. Make sure that the mounting ring is in a perfectly circular
shape by opening the bracket until the arms come in contact
with the stoppers, then set it into the ceiling hole. Push one of
the mounting bars L-shaped edges until it is ush with the joist,
and the bottom of the mounting bar lines up with the bottom of
the joist. Attach the mounting bar to the joist using appropriate
wood screws.
7. Push the other mounting bar L-shaped edge until it is ush
with the same joist, and the bottom of the mounting bar lines up
with the bottom of the joist. Attach the mounting bar to the joist
using appropriate wood screws.
8. Extend both mounting bars to reach the opposite joist, then
line up the bottoms for each mounting bar with the bottom of the
joist. Attach the mounting bar to the joist using appropriate wood
screws.

Produkt Specifikationer

Mærke: OSD Audio
Kategori: Ikke kategoriseret
Model: Black NCR10

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio Black NCR10 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret OSD Audio Manualer

OSD Audio

OSD Audio NERO-CONTROL12 Manual

17 August 2025
OSD Audio

OSD Audio Black S80 MK2 Manual

23 Juli 2025
OSD Audio

OSD Audio SKR120 Manual

22 Juli 2025
OSD Audio

OSD Audio BK50W70T Manual

21 Juli 2025
OSD Audio

OSD Audio SVC-300 Manual

21 Juli 2025
OSD Audio

OSD Audio C1070V Manual

20 Juli 2025
OSD Audio

OSD Audio SVC405 Manual

20 Juli 2025
OSD Audio

OSD Audio Black NC10 Manual

19 Juli 2025
OSD Audio

OSD Audio Black NCR10 Manual

18 Juli 2025
OSD Audio

OSD Audio Black NC5LCR Manual

18 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sunny

Sunny A030.139.01 Manual

4 September 2025
OWI

OWI AMP-ER2TR64 Manual

4 September 2025
ARC

ARC AP6C1 Manual

4 September 2025
SWIT

SWIT PC-P430 Manual

4 September 2025
ARC

ARC CKS70 Manual

4 September 2025
Wolfcraft

Wolfcraft 6902000 Manual

4 September 2025
OWI

OWI AMP-ER2TR62 Manual

4 September 2025
SWIT

SWIT LC-D421 Manual

4 September 2025
ARC

ARC AP6C Manual

4 September 2025
XPower

XPower BR-18L Manual

4 September 2025