Ozito ACP-5020K Manual

Ozito Kompressorer ACP-5020K

Læs gratis den danske manual til Ozito ACP-5020K (16 sider) i kategorien Kompressorer. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Ozito ACP-5020K, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Air Compressor
50 Piece Kitbox &
Accessories
AIR
COMPRESSOR
50L 2.0HP
INSTRUCTION MANUAL
SPECIFICATIONS
Power supply: 220–240V ~ 50Hz
Motor: 1500W (S3 25%), 2.0HP
Tank Capacity: 50L
No Load Speed: 3,750/min
Max. Pressure: 10bar (145psi)
Max. Flow Rate: 120L/min
Free Air Delivery: 48L/min
IP Rating: IP20
Weight: 23kg
ACP-5020K
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1118
10m Air Hose
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
0
50
100
150
200
225
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged, do
not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor is designed to be used in dry rooms. It is
prohibited to use the compressor in areas where work is
conducted with sprayed water. Before you use the machine, make
sure that the mains voltage complies with the specications on the
rating plate.
Attaching The Support Feet
1. With the pressure tank on its
side, insert a support feet bolt
through one of the support
feet and then the hole in the
frame of the tank.
Note: The support feet should
go on the front of the tank. The
transport handle is located on
the front end of the tank.
2. Use one of the nyloc nuts to
secure the support foot to the
frame.
3. Repeat the same procedure on the other side of the tank with the
second support foot.
Attaching The Wheels
1. Place a wheel bolt through
the wheel and then secure
this in place with a hex nut.
2. Slide this assembly through
the hole in the wheel bracket
and fasten it in position with a
Nyloc nut.
3. Repeat steps 1 and 2 to t the second wheel on the opposite side
of the tank.
1. Transport Handle
2. Pressure Tank
3. Regulated Pressure Outlet
4. Regulated Pressure Gauge
5. Safety Relief Valve
6. On/O Switch
7. Pressure Regulator
8. Wheels
9. Drain Valve
10. Support Feet
AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
11. Air Hose (10m) 12. 50 Piece Kitbox &
Accessories
1
2
3
4
5
6
7
8
12
11
9
10
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.

Produkt Specifikationer

Mærke: Ozito
Kategori: Kompressorer
Model: ACP-5020K

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito ACP-5020K stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kompressorer Ozito Manualer

Ozito

Ozito ACP-5020K Manual

5 Juli 2024

Kompressorer Manualer

Nyeste Kompressorer Manualer

Granit

Granit FL Manual

15 Januar 2025
Hamron

Hamron 604-193 Manual

13 Januar 2025
Güde

Güde 50079 Manual

12 Januar 2025
Bavaria

Bavaria BAC 180 Manual

11 Januar 2025
FERM

FERM MCM1002 KM-250 Manual

13 Oktober 2024
Zipper

Zipper ZI-COM 24 Manual

11 Oktober 2024
FERM

FERM CRM1037 Manual

7 Oktober 2024
Bavaria

Bavaria BAC 200-20 OF Manual

27 August 2024
Bavaria

Bavaria BAC 380-50V Manual

27 August 2024
Gude Pro

Gude Pro 01730 Manual

26 August 2024