Ozito EPHT-501 Manual

Ozito Hækkeklipper EPHT-501

Læs gratis den danske manual til Ozito EPHT-501 (8 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Ozito EPHT-501, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

TELESCOPIC

POLE HEDGE

TRIMMER

500W 470MM

INSTRUCTION MANUAL

SPECIFICATIONS

Input Power: 500W

No Load Speed: 3,000/min

Blade Length: 560mm

Telescopic Range: 2.30 - 3.10m

Max. Cutting Length: 470mm

Max. Cutting Diameter: 14.5mm

Noise Rating: 105dB

Weight: 4.4kg

EPHT-501

STANDARD EQUIPMENT

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of 36 months from the original date of purchase.

If a product is defective it will be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: bearings, carbon brushes, blade, and included

accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that speciﬁed on the machine.

• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria 3175 Australia.

ozito.com.au

Telescopic Pole Hedge Trimmer

Blade Cover

1122

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY

YOU MUST RETURN THE PRODUCT TO YOUR NEAREST

BUNNINGS WAREHOUSE WITH YOUR BUNNINGS

PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The beneﬁts provided under this warranty are in addition to other rights and remedies which

are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective product

you may be able to claim such expenses by contacting our customer service helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE

THE MODEL NUMBER AND DATE OF PURCHASE

AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE

WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

Combination Key & Screw

Shoulder Strap

Fitting the motor housing

1. Push the tube fully into the motor housing aligning the cutout. Ensure the

motor housing and the rear handle are in the correct orientation when you

do so.

1. Blade

2. Motor housing

3. Pivoting head button

4. Motor tube collar

5. Telescopic tube collar

6. Main tube

7. Shoulder strap retainer

8. Soft grip handle

9. Rear handle

10. Safety switch

11. Trigger switch

12. Extension cord retainer

13. Blade cover

14. Shoulder strap

15. Combination key

16. Assembly screw

TELESCOPIC POLE HEDGE TRIMMER

ACCESSORIES

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

WARNING! ENSURE THE MACHINE IS TURNED OFF AND

DISCONNECTED FROM THE POWER SUPPLY BEFORE

PERFORMING ANY OF THE FOLLOWING OPERATIONS.

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

11 12

2. Screw tight with the motor tube

collar.

WARNING! WHEN HANDLING THE BLADE ASSEMBLY,

WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES.

DO NOT PLACE YOUR HAND OR FINGERS BETWEEN

BLADES OR IN ANY POSITION WHERE THEY COULD

GET PINCHED OR CUT. NEVER TOUCH BLADES, MAKE

ADJUSTMENTS OR SERVICE THE UNIT WITH THE POWER

SUPPLY CONNECTED.

Blade cover

The blade cover protects

the blade when not in

use. Simply slide it off the

blade before use. Once

ﬁnished operating, place

the cover back over the

blade.

WARNING! NEVER START THE POLE HEDGE TRIMMER

WHILE THE BLADE COVER IS FITTED.

15 16

3. Fit the assembly screw in the

hole provided and ﬁrmly tighten

to secure in place with the

combination key.

NOTE: The hole in the tube and

the motor housing will align when

assembled correctly.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Hækkeklipper
Model:	EPHT-501

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito EPHT-501 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hækkeklipper Ozito Manualer

Ozito PXBHTS-1861 Manual

17 August 2025

Ozito PXCGSS-018 Manual

10 Oktober 2024

Ozito PXCHTS-018 Manual

2 Oktober 2024

Ozito PXPHTS-1845 Manual

1 September 2024

Ozito PXPPK-2520 Manual

25 August 2024

Ozito PXPHTK-2545 Manual

25 August 2024

Ozito HTER-600U Manual

15 August 2024

Ozito PXCHTS-018U Manual

14 August 2024

Ozito PXCPHTS-018U Manual

12 August 2024

Ozito PXCHTK-218U Manual

12 August 2024

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

Cocraft MT15 Manual

9 September 2025

Brandson 303503 Manual

6 September 2025

Powerworks P60PHT Manual

3 September 2025

Könner & Söhnen KS HT-20V Manual

2 September 2025

Kress KC241.9 Manual

1 September 2025

Craftsman 917.28826 Manual

1 September 2025

Einhell BG-EHS 695 Manual

1 September 2025

Einhell BHS 26 Manual

1 September 2025

Craftsman CMCHTS860 Manual

30 August 2025

Stiga HT 100e Manual

29 August 2025