Ozito MSK-001 Manual

Ozito Rysteplaster MSK-001

Læs gratis den danske manual til Ozito MSK-001 (6 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 35 anmeldelser. Har du et spørgsmål om Ozito MSK-001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

MULTI

SANDER

200W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 200W

No Load Speed: 7,000-12,000/min

Paper Fitment: Hook & Loop

Paper Size: 145x100mm (Triangular)

125mm (Circular)

183x92mm (1/3 Sheet)

Weight: 1.38kg

MSK-001

STANDARD EQUIPMENT

Multi Sander

3 x Sanding Paper

Dust Canister

3 x Sanding Base

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: carbon

brushes, dust bags, backing pads and sanding sheets.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

0519

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

KNOW YOUR PRODUCT

1. CHANGING SANDING BASES

6 Random Orbital Sanding Base

7 Random Orbital Sanding

Paper x 1 (120Grit)

8 Sheet Sanding Base

9 Sheet Sanding Paper x 1

(60Grit)

10 Detail Sanding Base

11 Detail Sanding Paper x 1

(80Grit)

ACCESSORIES

1 Variable Speed Dial

2 Hook & Loop Sanding Pad

3 On/O󰀨Switch

4 Sure Grip Handle

5 Dust Canister

MULTI SANDER

SETUP & PREPARATION

WARNING: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS..

WARNING: ENSURE THAT THE SCREWS ARE NOT

TIGHTENED WITH EXCESSIVE FORCE. DO NOT

USE A POWER DRILL FOR THIS OPERATION.

1 2 3 4 5

6 7 8 109 11

TheMultiSandercomeswith3sandingbasesthatcanbettedto

the tool, including:

• Circular random orbital sanding base (125mm)

• Triangular detail sanding base (145x100mm)

• Rectangular 1/3 sheet sanding base (183x91mm)

Note:Beforeremovingorttingthesandingbases,anysandpaper

must be removed so that you can access the mounting screws.

Removing Sanding Bases

Fitting Sanding Bases

1 Remove the 4 screws from the

base of the sanding pad by

rotating anti-clockwise.

1 Place the sanding base onto

the tool, aligning the mounting

holes and the aligning pins.

Note: The circular sanding base

does not require aligning pins.

2 Pull the sanding base

and aligning pins away

from the tool to remove.

Note: The base aligning

pins can sometimes get

stuck in the base of the tool.

2 Tighten the 4 screws into

the base of the sanding

pad with a screwdriver to

secure in place.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Rysteplaster
Model:	MSK-001

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito MSK-001 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Rysteplaster Ozito Manualer

Ozito SPR-7100 Manual

14 Maj 2024

Ozito MSK-001U Manual

8 April 2024

Ozito BSV-9000 Manual

5 Marts 2024

Ozito ROS-2000 Manual

7 Januar 2024

Ozito BSR-7000 Manual

3 Januar 2024

Ozito ROS-4000U Manual

26 Juli 2023

Ozito PXBPS-254 Manual

5 December 2022

Ozito MFS-4000 Manual

16 November 2022

Ozito DSR-2000 Manual

13 November 2022

Ozito QSS-1000 Manual

4 November 2022

Rysteplaster Manualer

Nyeste Rysteplaster Manualer

Kraftronic KT-ES 130 Manual

18 Juni 2025

15 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

Draper Storm Force 89522 Manual

13 Juni 2025

Draper Storm Force 69039 Manual

13 Juni 2025

Draper Storm Force 70834 Manual

13 Juni 2025

Draper Storm Force 98419 Manual

12 Juni 2025

Draper 55657 Manual

12 Juni 2025