Ozito WDVB-1312 Manual

Ozito Støvsuger WDVB-1312

Læs gratis den danske manual til Ozito WDVB-1312 (8 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Ozito WDVB-1312, eller vil du spørge andre brugere om produktet?

Side 1/8
Angled Nozzle, Concentrator
Nozzle, Crevice Tool, Floor Tool &
2 x Extension Tubes
1.8m Hose, Foam Filter & Cartridge
Filter & Lid
Shoulder Strap & Mounting Ring,
Noise Diffuser, Blower Adaptor &
4 x Castor Wheels
2-IN-1
WET & DRY
VACUUM / BLOWER
1300W 30L / 360KM/H
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 220–240V ~ 50-60Hz
Input Power: 1300W
Max. Suction Power: 120mbar
Inlet Air Flow: 45-60L/s
Tank Capacity: 30L
Max. Air Speed: 360km/hour
Hose Diameter: Ø64mm
Hose Length: 1.8m
Weight: 8.4kg
WDVB-1312
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other
than that specified on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
2-in-1 Wet & Dry Vacuum/ Blower
0919
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
Attaching The Feet & Castors
1. Press in the tabs on the latches to
release the tank lid.
2. Remove the tank lid and empty the tank
of all accessories.
3. Turn the tank upside down and
insert a castor foot into the slot on
the side of the tank.
4. Insert a screw into the hole
and tighten with a Philips head
screwdriver (not supplied).
5. Repeat steps 3 & 4 with the other 3 castor wheels.
6. Turn the tank right side up and replace the lid.
Note: Always ensure that the latch tabs have clicked back into place
and the tank lid is securely attached.
Noise Di󰀨user
The di󰀨user can be used
for quieter operation during
vacuuming.
1. Insert the locking end onto the
blower port and turn clockwise
to lock it into place.
Attaching The Blower Strap
For easier usage, the strap can be used to carry the Blower unit on
your shoulder when it is detached from the vacuum tank.
1. Insert one end of the
mounting ring into the blower
unit and pull the other end
around the front of the unit.
2. Attach the clip on the strap to
the mounting ring. Adjust the
strap as necessary.
1. Cord Hook
2. Blower Release Button
3. Carry Handle
4. On/O󰀨 Button
5. Strap Mounting Ring
6. Concentrator Nozzle
7. Blower Port
8. Noise Di󰀨user
9. Blower Intake Lid
10. Floor Tool
11. Angled Nozzle
12. Castor Wheel
13. Vacuum Tank
14. Lid Latch
15. Accessory Storage Slot
16. Drain Outlet Cap
17. Vacuum Port
18. Tank Lid
19. Crevice Tool
20. Extension Tube
2-IN-1 WET & DRY VACUUM / BLOWER
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
21. 1.8m Hose
22. Foam Filter
23. Cartridge Filter & Lid
24. Blower Adaptor
a.
b.
a.
b.
2
15
16
19
18
20
17
9
1
21 22 23 24
3
75 64
14
10
8
11
12
13
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.


Produkt Specifikationer

Mærke: Ozito
Kategori: Støvsuger
Model: WDVB-1312

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito WDVB-1312 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Støvsuger Ozito Manualer

Ozito

Ozito PXVWDK-400U Manual

13 August 2024
Ozito

Ozito PXHVS-250U Manual

12 August 2024
Ozito

Ozito VWD-1220PTU Manual

12 August 2024
Ozito

Ozito WDVB-1312 Manual

11 August 2024
Ozito

Ozito VWD-1212U Manual

9 August 2024
Ozito

Ozito VWD-1235PTO Manual

27 Marts 2024
Ozito

Ozito VWD-1235PT Manual

12 Marts 2024
Ozito

Ozito PXVWDS-1818 Manual

12 November 2023
Ozito

Ozito BLV-2401 Manual

11 September 2023

Støvsuger Manualer

Nyeste Støvsuger Manualer