Panasonic CQ-DF203W Manual


Læs gratis den danske manual til Panasonic CQ-DF203W (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Panasonic CQ-DF203W, eller vil du spørge andre brugere om produktet?

Side 1/10
CQ-DF203W CQ-DF203W
E
N
G
L
I
S
H
12
21
E
N
G
L
I
S
H
11
20
Audio Settings
Note:
Press [DISP] (display) to return to
the regular mode.
If no operation takes place for
more than 7 seconds in audio set-
ting, the display returns to the reg-
ular mode.
[VOL "]: Increases the bass.
[VOL #]: Decreases the bass.
[VOL "]: Increases the treble.
[VOL #]: Decreases the treble.
[VOL "]: Right enhanced.
[VOL #]: Left enhanced.
[VOL "]: Front enhanced.
[VOL #]: Rear enhanced.
Bass and Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: 12 dB (by 2 dB)j i12 dB to
Balance and Fader
You can adjust the sound balance among the
front, rear, right and left speakers.
Default: BAL (balance) CNT (center)
FAD (fader) CNT (center)
Setting range: 15 levels each
Select
Select
Select
Select
Select
Press (select).[SEL]
Volume
Default: 18
Setting range: 0 to 40
Muting or Attenuation
You can select MUTE or ATTENUATION when
[MUTE] is pressed.
Default: MUTE
Select
[VOL "]: Increases the volume.
[VOL #]: Decreases the volume.
[VOL #]: No sound.
[VOL "]: Decrease the volume
by 10 steps.
(attenuation)
Turn .[VOL]
(Press [VOL [VOL "]or #]
on the remote control unit.)
[VOL ][VOL ] "#
1 2
(Push.)
PWR
MODE
PRG
TUNE
TRACK
Car Audio
BAND/DISC UP
VOL
MUTE
(ATT )
[VOL ]"
[VOL ] #
(set)
CQ-DF203W CQ-DF203W
E
N
G
L
I
S
H
14
23
E
N
G
L
I
S
H
13
22
Function Settings
Security Function
When the key in the ignition is turned
OFF.
Security message will be displayed.
The panel removable alarm will be active.
(page 35)
When the removable face plate is re-
moved.
The security indicator blinks.
(page 35)
Level Meter
Default: PATTERN 1
Setting range: PATTERN 1 to 4,
OFF
Security Function
The security indicator blinks
when the removable face plate
is removed from the unit.
Default: SLED ON
Note:
Press [DISP] (display) to return to the
regular mode.
If no operation takes place for more
than 7 seconds in function setting, the
display returns to the regular mode.
["]: Security function is active.
[ ][ ] "#
Press and hold [SEL]
(select) for more than
2 seconds.
Press (select).[SEL]
Select
Select
Turn .[VOL]
[ ][ ] "#
[#]:
Security function is non-active.
1 32
(Push.)
(Press and hold.)
2 sec.
Pattern 4
Pattern 3
Pattern 2
Pattern 1
Pattern off


Produkt Specifikationer

Mærke: Panasonic
Kategori: Ikke kategoriseret
Model: CQ-DF203W

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic CQ-DF203W stil et spørgsmål nedenfor, og andre brugere vil svare dig