Panasonic DP-102 Manual

Panasonic Ikke kategoriseret DP-102

Læs gratis den danske manual til Panasonic DP-102 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Panasonic DP-102, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

INSTRUCTION MANUAL

DP-100 Series

High-performance Digital DisplayPressure Sensor

WARNING

Thank you very much for using SUNX products. Please read this

Instruction Manual carefully and thoroughly for the correct and optimum

use of this product. Kindly keep this manual in a convenient place for quick

reference.

Never use this product as a sensing device for personnel protection.

In case of using sensing devices for personnel protection, use products

which meet laws and standards, such as OSHA, ANSI or IEC etc., for

personnel protection applicable in each region or country.

Japanese Measurement Laws prohibit the use of this product in Japan.

NAMES OF EACH PART1

Connection

connector

DP-100

type: R

㧛

+ M5 female screw

DP-100-E

type: G

㧛

+ M5 female screw

DP-100-N

type:

NPT

㧛

+ M5 female screw

Pressure port

㧝

DP-100

Main display

Sub-display

Setting value

DOWN key

Setting value UP key

٨When connecting a commercial coupler to the pressure port, attach a

12mm spanner (14mm for type) to the pressure port's hexa-DP-100-E

gon section to fix the port, and then tighten with a tightening torque of

9.8N䊶m or less. The commercial coupler or pressure port section will be

damaged if the tightening torque is excessive.

Wrap sealing tape around the coupler when connecting to prevent leaks.

PIPING2

Standard type:

Lights up when compa-

rative

output 2 is ON

High-function type:

Lights up when analog

voltage output is set

Output 2 / analog

voltage output oper-

ation indicator

Lights up when compa-

rative output 1 is ON

Output 1 operation

indicator

Mode selection key

MJE-DP100 No.6091-00

12mm spanner

MOUNTING3

٨The sensor mounting bracket (MS-DP1-1)is available as an option.

When mounting the sensor onto the sensor mounting bracket, etc., the

tightening torque should be 1.2N m or less.䊶

Sensor mounting bracket

MS-DP1-1 (Optional)

M3 (length 6mm) screws

with washers

(Accessory with MS-DP1-1)

٨The panel mounting bracket (optional) and front coverMS-DP1-2

MS-DP1-3 (optional) are also available as options.

Front cover

MS-DP1-3 (Optional)

(Unit: mm)

Panel cut-out size

Panel mounting bracket

MS-DP1-2 (Optional)

M3 (length 12mm) pan head

screw

(Accessory with MS-DP1-2)

For use outside Japan

Connection method

Disconnection method

Note: Do not pull by holding the cable without pressing the release lever, as this can

cause cable break.

Insert the cable with connector CN-14A-Cغ

into this product's connection connector

section as shown in the right figure.

٨Pressing the release lever of the cable

with connector, pull out the cable.

WIRING4

Cable with connector

CN-14A-Cغ

Release lever

Ԙ ԙ Ԛ ԛ

㧝

Connector pin No.

Terminal name

+VԘ

Comparative output 1ԙ

Standard type: Comparative output 2

High-function type: Analog voltage output or external input

0Vԛ

Contact: SPHD-001T-P0.5

Housing: PAP-04V-S

[JST Mfg. Co., Ltd.]

Standard type

Users' circuitInternal circuit

_12 to 24V DC

±10%

(Black)

Comparative output 1

Main circuit

(White) Comparative output 2

(Blue) 0V

100mA max.

Load

Main circuit

High-function type

Users' circuitInternal circuit

_12 to 24V DC

±10%

(White)

Analog voltage output

or external input

(Black) Comparative output 1

(Blue) 0V

100mA max.

1kΩ

Load

PNP output type

Standard type

Main circuit

Users' circuitInternal circuit

_12 to 24V DC

±10%

(Black) Comparative output 1

(White) Comparative output 2

(Blue) 0V

100mA max.

Load

NPN output type

When using the analog voltage output, take care to the input impedance of

the connected device.

Furthermore, note that if the cable is extended, the cable resistance will

cause the voltage to drop.

I/O CIRCUIT DIAGRAMS5

High-function type

Main circuit

(Black) Comparative output 1

Users' circuitInternal circuit

_12 to 24V DC

±10%

(Blue) 0V

(White)

Analog voltage output

or external input

1kΩ

100mA max.

Load

(Brown)㧗V

Color code of cable with connector

(Brown)㧗V

Color code of cable with connector

(Brown)㧗V

Color code of cable with connector

(Brown)㧗V

Color code of cable with connector

OUTPUT MODE AND OUTPUT OPERATION6

Notes:1)

2

Hysteresis can be fixed in 8 steps.

Refer to < > in ' ' for setting.Hysteresis fixed value selection  PRO MODE

' ' is displayed for comparative output 1 and ' ' for comparative output 2.

٨ON / OFF of the comparative output is controlled in this mode.

EASY mode

H (Hysteresis)

H Hysteresis fixed (Note 1)㧦

OFF

Comparative

output

Pressure

The EASY mode, hysteresis mode or window comparator mode can be

selected as the output mode for comparative output 1 and comparative

output 2.

Refer to 'Comparative output 1/2 output mode setting' in ' MENU

SETTING MODE' for details.

SETTING

RUN MODE

This is the pressure detection state.

Refer to ' '.RUN MODE

MENU SETTING MODE

This is the setting mode for simple

setting.

Refer to ' '.MENU SETTING MODE

PRO MODE

This is the setting mode for

detailed setting.

Refer to ' PRO MODE

Press for 2 sec.

MODE

Press for 4 sec.

MODE

٨The comparative output ON / OFF state can be controlled with randomly

set hysteresis in this mode.

Hysteresis mode

OFF

Comparative

output

H (Hysteresis)

Pressure

٨I

n this mode, the ON or OFF state of the comparative output is controlled

with a pressure in the set range.

Window comparator mode

H (Hysteresis)

H Hysteresis fixed (Note 1)㧦

H (Hysteresis)

Comparative

output

OFF

Pressure

Note:

' ' or ' ' is displayed for comparative output 1 and ' ' or ' ' for

comparative output 2.

H: 1 digit or more

2 digits or more when

using psi unit

Notes:1)

2

Hysteresis can be fixed in 8 steps.

Refer to in ' ' for setting.< Hysteresis fixed value selection> PRO MODE

' ' or ' ' is displayed for comparative output 1 and ' ' or ' ' for

comparative output 2.

Comparative output 1 output mode: ' ' (Hysteresis mode) or

' '

(Window comparator mode)

Comparative output 2 output mode: ' ' (OFF)

Comparative output 1 output mode: ' ' (Hysteresis mode) or

' '

(Window comparator mode)

Comparative output 2 output mode: ' ' (EASY mode)

RUN MODE8

Setting the threshold value

Refer to 'Comparative output 1/2 output

mode setting Analog voltage output / ' and '

external input selection' in ' MENU SET-

TING MODE' for setting conditions.

࡮Standard type

Comparative output 1 output mode: ' ' (EASY mode)

Comparative output 2 output mode: ' ' (OFF)

Comparative output 1 output mode: ' ' (EASY mode)

Comparative output 2 output mode: ' ' (Hysteresis mode) or

' '

(Window comparator mode)

Comparative output 1 output mode: ' ' (EASY mode)

Comparative output 2 output mode: ' ' (EASY mode)

Note: If the set pressure range is exceeded, ' ' (exceeds the upper limit) or ' '

(exceeds the lower limit) will appear on the sub-display.

' ' will also appear if the Hi side threshold value exceeds the Lo side threshold

value when setting the ' hysteresis mode / window comparator mode ' threshold value.

Comparative output 1 output mode: ' ' (Hysteresis mode) or

' '

(Window comparator mode)

Comparative output 2 output mode: ' ' (Hysteresis mode) or

' '

(Window comparator mode)

DP-100

Since only the sub-display changes in the threshold setting, the following

shows only the sub-display.

MODE

Automatic

MODE

Automatic

MODE

Automatic

MODE

Produkt Specifikationer

Mærke:	Panasonic
Kategori:	Ikke kategoriseret
Model:	DP-102

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic DP-102 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panasonic Manualer

Panasonic KX-TG3101 Manual

26 Juli 2025

Panasonic ER-CKL1 Manual

26 Juli 2025

Panasonic F-48DGL Manual

26 Juli 2025

Panasonic CZ-RTC4A Manual

26 Juli 2025

Panasonic DMW-LND58GU Manual

26 Juli 2025

Panasonic DMR-BWT750 Manual

25 Juli 2025

Panasonic AK-HRP1015G Manual

25 Juli 2025

Panasonic KX-TCA430 Manual

21 Juli 2025

Panasonic NB-G110P Manual

21 Juli 2025

Panasonic NN-CD65NS Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Beverage-Air WTRCS36HC-48 Manual

12 August 2025

Garmin Foretrex 701 Ballistic Edition Manual

12 August 2025

Gourmia GVS1415 Manual

12 August 2025

Sony HKC-TR27 Manual

12 August 2025

Beverage-Air RI18HC-HG Manual

12 August 2025

Beverage-Air PHI1-1S-PT Manual

12 August 2025

Allen & Heath MixWizard WZ2 Manual

12 August 2025

AquaMAX G270SS Manual

12 August 2025

Kindercraft SAFE SNAP Manual

12 August 2025

Victrix Pro KO Leverless Fight Stick Manual

12 August 2025