Panasonic EXF72PN Manual

Panasonic Ikke kategoriseret EXF72PN

Læs gratis den danske manual til Panasonic EXF72PN (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Panasonic EXF72PN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Thank you very much for using SUNX products. Please

read this Instruction Manual carefully and thoroughly for

the correct and optimum use of this product. Kindly keep

this manual in a convenient place for quick reference.

EX-F70 Series

INSTRUCTION MANUAL

Amplifier Built-in Leak Detection Sensor

Photoelectric Sensor

PRINTED IN JAPAN

Overseas Sales Dept. (Head Office)

2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan

Phone: +81-(0)568-33-7861 FAX: +81-(0)568-33-8591

Europe Headquarter: Panasonic Electric Works Europe AG

Rudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany

Phone: +49-8024-648-0

US Headquarter: Panasonic Electric Works Corporation of America

629 Central Avenue New Providence, New Jersey 07974 USA

Phone: +1-908-464-3550

URL : sunx.jp

SUNX Limited

Never use this product as a sensing device for

personnel protection.

In case of using sensing devices for personnel

protection, use products which meet laws and stan-

dards, such as OSHA, ANSI or IEC etc., for person-

nel protection applicable in each region or country.

SPECIFICATIONS

Notes: 1) Highly viscous liquid may not be stably detected.

2) Fluorinert TM is the worldwide trademark of 3M.

3) Liquid being detected should be also kept within the rated ambient temperature range.

Type SUS mounting bracket type PVC mounting bracket type

2m cable length type 5m cable length type 2m cable length type 5m cable length type

Model

NPN output

EX-F71 EX-F71-C5 EX-F72 EX-F72-C5

Item

No.

PNP output

EX-F71-PN EX-F71-PN-C5 EX-F72-PN EX-F72-PN-C5

Sensing object Water, Fluorinert TM (Note 1) (Note 2)

Supply voltage 12 to 24V DC ± 10% Ripple P-P 10% or less

Current consumption 10mA or less (PNP output type: 15mA or less)

Output

NPN open-collector transistor

Maximum sink current: 50mA

Applied voltage: 30V DC or less (between output and 0V)

Residual voltage: 1.0V or less (at 50mA sink current)

0.4V or less (at 16mA sink current)

•

PNP open-collector transistor

Maximum source current: 50mA

Applied voltage: 30V DC or less (between output and +V)

Residual voltage: 1.0V or less (at 50mA source current)

0.4V or less (at 16mA source current)

•

Output operation ON when normal operation, OFF when leak is detected or the sensor is mounted improperly.

Short-circuit protection

Incorporated

Response time 50ms or less

Abnormal indicator Red LED (lights up when leak is detected or the sensor is mounted improperly.)

Normal indicator Green LED (lights up when the sensor is mounted properly.)

Protection IP67 (IEC)

Ambient temperature –10 to +60°C (No dew condensation or icing allowed) (Note 3), Storage: –20 to +70°C

Ambient humidity 35 to 85% RH, Storage: 35 to 85% RH

Ambient illuminance Incandescent light: 1,000Ɛx at the light-receiving face

Emitting element Infrared LED (non-modulated)

Material Enclosure: Polypropylene

Cable 0.1mm 2

3-core PVC

cabtyre cable, 2m long

0.1mm2 3-core PVC

cabtyre cable, 5m long

0.1mm 2 3-core PVC

cabtyre cable, 2m long

0.1mm2 3-core PVC

cabtyre cable, 5m long

Weight Approx. 25g Approx. 55g Approx. 25g Approx. 55g

Accessories SUS mounting bracket: 1 pc.

39&PRXQWLQJEUDFNHWSFHDFKIRUWZRSRLQW¿[LQJDQGDGKHVLYH¿[LQJ

CAUTIONS

This product has been developed / produced for

industrial use only.

Avoid using the product in an explosive atmo-

sphere because this product does not have an

explosive-proof protective construction.

Make sure that the power supply is off while wiring.

Take care that wrong wiring will damage the sensor.

Verify that the supply voltage variation is within

the rating.

Take care that if a voltage exceeding the rated

range is applied, or if an AC power supply is directly

connected, the sensor may get burnt or damaged.

If power is supplied from a commercial switching

regulator, ensure that the frame ground (F.G.)

terminal of the power supply is connected to an

actual ground.

Do not use during the initial transient time (approx.

30 sec. ) after the power supply is switched on.

In case noise generating equipment (switching

regulator, inverter motor, etc.) is used in the vicin-

ity of this product, connect the frame ground (F.G.)

terminal of the equipment to an actual ground.

Cable extension is possible up to total 50m with

0.3mm2, or more, cable. However, in order to re-

duce noise, make the wiring as short as possible.

Do not run the wires together with high-voltage

lines or power lines or put them in the same race-

way. This can cause malfunction due to induction.

In case a surge is generated in the used power supply, con-

nect a surge absorber to the supply and absorb the surge.

Be sure to use the exclusive mounting bracket when installing

the sensor to avoid human error, etc. Reliable detection can-

not be guaranteed when this mounting bracket is not used.

MOUNTING

(;)Ƒ

Insert the M4 stud-bolt (length 10mm or more)

welded on the user’s facilities into the mounting

hole of the SUS mounting bracket and screw with

an M4 nut (please arrange separately).

The tightening torque should be 0.98N·m or less.

M4 nut <Mounting dimensions (Unit: mm)>

M4 stud-bolt

(straight type)

26.516

5.5

(;)Ƒ

,QFDVHRIXVLQJWKHWZRSRLQW¿[LQJ39&PRXQWLQJEUDFNHW!

Insert M4 stud-bolts (length 10mm or more) welded

on the user’s facilities into the mounting holes of

the two-point-fixing mounting bracket and screw

with M4 nuts (please arrange separately).

The tightening torque should be 0.49N·m or less.

M4 nuts

M4 stud-bolts

(straight type)

26.5

34.7

20.7

+RZWR¿WWKHVHQVRUERG\WRWKHH[FOXVLYHPRXQWLQJEUDFNHW

,QFDVHRIXVLQJWKH39&PRXQWLQJEUDFNHWIRUDGKHVLYH¿[LQJ!

Use adhesive to stick fast the mounting bracket

on the mounting surface. Please note that if the

adhesive sticks out from the bottom surface of

the mounting bracket or is 0.5mm, or more thick,

WKHVHQVRUERG\FDQQRWEH¿WWHGWRWKHPRXQWLQJ

bracket.

Match the notch in the sensor body with the

projection of the exclusive mounting bracket and

slide till a click is felt.

Notch

Projection

I/O CIRCUIT DIAGRAMS

NPN output typeƔ

PNP output typeƔ

Load

Internal circuit Users’ circuit

(Brown) +V

(Blue) 0V

50mA max.

(Black) Output

12 to 24V DC

±10%

Color code

Main circuit

Load

Internal circuit Users’ circuit

(Brown) +V

(Blue) 0V

50mA max.

(Black) Output

12 to 24V DC

±10%

Color code

Main circuit

INTENDED PRODUCTS FOR CE MARKING

The models listed under “ SPECIFICA-

TIONS” come with CE Marking.

As for all other models, please contact our

RI¿FH

Take care not to use the SUS mounting bracket for

EX-F72 EX-F71ƑRUWKH39&PRXQWLQJEUDFNHWIRU ƑPLV-

takenly, since normal detection cannot be performed.

Make sure to use an isolation transformer for the

DC power supply. If an auto-transformer (single

winding transformer) is used, this product or the

power supply may get damaged.

In case air bubbles are drawn into the sensing part,

take care that it may take some time for sensing to

stabilize, or sensing may even become unstable.

When conducting maintenance after operation,

wipe all liquid from the sensor and mounting brack-

et with a soft cloth.

If there is liquid remained or scratch on the sensing

surface or the exclusive mounting bracket, normal

operation cannot be performed.

Since this sensor employs non-modulated infrared

/('WDNHVXI¿FLHQWFDUHDJDLQVWH[WUDQHRXVOLJKW

Do not expose the sensing part directly to the ex-

traneous light.

Avoid dust, dirt, and steam. Further, do not use this

product in an environment containing organic solvents.

Take care that the product does not come in con-

tact with oil, grease or organic solvents, such as,

thinner, etc.

In case this sensor is used where electrostatic

charge is present, use a metal leak pan, which

should be connected to an actual ground.

Produkt Specifikationer

Mærke:	Panasonic
Kategori:	Ikke kategoriseret
Model:	EXF72PN

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic EXF72PN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panasonic Manualer

Panasonic MX-HG4401 Manual

10 Oktober 2025

Panasonic EY3794 Manual

8 Oktober 2025

Panasonic CS-ME14CB1P Manual

1 Oktober 2025

Panasonic AV-HSW10 Manual

18 September 2025

Panasonic SD3-A1 Manual

15 September 2025

Panasonic PT-DW5100 Manual

27 August 2025

Panasonic PT-D4000 Manual

26 August 2025

Panasonic NB-G211 Manual

14 August 2025

Panasonic NN-TK81KC Manual

13 August 2025

Panasonic KX-TG3101 Manual

26 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Abus Pedelec 2.0 Manual

29 Oktober 2025

Blizzard Aria Profile 19° Manual

29 Oktober 2025

BaoFeng UV-5G Mini Manual

29 Oktober 2025

Owon OWH67D Manual

29 Oktober 2025

Iogear GUB431CA1KIT Manual

29 Oktober 2025

Eliminator Lighting E 109 Manual

29 Oktober 2025

Eliminator Lighting E118 MKII Manual

29 Oktober 2025

SilverCrest STC 850 E4 Manual

29 Oktober 2025

Philips S793 Manual

29 Oktober 2025

Philips S792 Manual

29 Oktober 2025