Panasonic NA1PK5PN Manual

Panasonic Ikke kategoriseret NA1PK5PN

Læs gratis den danske manual til Panasonic NA1PK5PN (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Panasonic NA1PK5PN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Slim Body

Excellent Mutual Interference Prevention Function

Selectable Detection Operation

Lighting Pattern Selectable

PNP Output Type Is Available

CE Marked

Clearly Visible Job Indicator Prevents Wrong Picking!

Suited for Miscellaneous

Object Picking Jobs!

Easy to Use and Clearly Visible!!

ULTRA-SLIM BODY AREA SENSOR

Suited for Miscellaneous

Object Picking Jobs!

Easy to Use and Clearly Visible!!

Wide-view bright job indicators which are clearly

visible from any direction, the front or the side of

the sensor, have been used.

Further, use of 8 orange LEDs contributes further

to clear visibility. Picking location can be easily

confirmed even in a brightly lit workplace.

Conforming to

EMC Directive

Clearly visible

from all directions!

Clearly visible

from all directions!

Flexible cable

orientation

Flexible cable

orientation

Slim Body

NA1-PK5 has an ultra-slim body, just 10mm thick. It fits into

a small space, without obstructing normal operation.

Excellent Mutual Interference Prevention Function

Mutual interference can be prevented by setting different

emission frequencies. This function allows the sensor to be

safety used in applications covering a wide area or for instal-

lation of several sensors in a row along parts shelves.

Selectable Detection Operation

Detection on interruption of either minimum one beam or

minimum two beams can be selected to suit the application.

Lighting Pattern Selectable

The job indicator operation can be selected as either contin-

uous lighting or blinking.

PNP Output Type Is Available

PNP output type NA1-PK5-PN which is widely used in

Europe is also available.

CE Marked

NA1-PK5 conforms to the EMC Directive.

Four bracket set

(Screws, nuts and hooks are attached.)

Two silver-color bracket set

(Screws and nuts are attached.)

Two black bracket set

(Screws and nuts are attached.)

MS-NA1-1

MS-NA2-1

MS-NA3

MS-NA3-BK

Sensing height

Sensing range (Note 1)

Beam pitch

Number of beam channels

Sensing object

Supply voltage

Power consumption

(Note 2)

Output

Utilization category

Output operation

Short-circuit protection

Response time

Emitter

Receiver

Interference prevention function

Pollution degree

Protection

Ambient temperature

Ambient humidity

EMC

Emitting element

Material

Cable

Cable extension

Weight

NPN output PNP output

NA1-PK5 NA1-PK5-PN

Type

Item

Model No.

100mA max.

Users’ circuitInternal circuit

Sensor circuit

Job indicator lighting/

blinking circuit

Load

(Brown)V

(Black) Output

(Note)

(Blue) 0V

(Pink) Input

Color code

12 to 24V DC

10%





100mm

0.1 to 1.2m (0.05 to 0.5m when set to SHORT)

25mm

5 beam channels

"35mm or more opaque object

12 to 24V DC10% Ripple P-P 10% or less

Emitter: 0.5W or less

Receiver: 0.8W or less

DC-12 or DC-13

ON or OFF when one or more beams are interrupted/

ON or OFF when two or more beams are interrupted,

selectable by operation mode switch

Incorporated

10ms or less (when the interference prevention is used, in Light

state: 30ms or less, in Dark state: 13ms or less)

Power indicator: Green LED (lights up when the power is ON)

Job indicator: Orange LED lights up or blinks when the job indicator

input is Low, lighting pattern is selected by

operation mode switch

Operation indicator: Red LED lights up when one or more beams are interrupt-

ed, but lights up when two beams or more are

interrupted in the double-beam-interruption mode

Stable incident beam indicator: Green LED lights up when all beams

are stably received

Job indicator: Orange LED lights up or blinks when the job indicator

input is Low, lighting pattern is selected by

operation mode switch

Incorporated

3 (Industrial environment)

IP62 (IEC)

   10 to 55C (No dew condensation or icing allowed), Storage: 20 to 70C

35 to 85% RH, Storage: 35 to 85% RH

Emission: EN50081-2, Immunity: EN50082-2

Infrared LED (synchronized scanning system)

Enclosure: Heat-resistant ABS, Lens case: Acrylic, Indicator cover: Acrylic

0.3mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2m long

Extension up to total 100m is possible for both emitter and

receiver with 0.3mm

2, or more, cable.

Emitter: 80g approx., Receiver: 85g approx.

•This product is not intended or designed to protect life and prevent body injury or property

damage from dangerous parts of machinery. It is a normal object detection sensor.

•This product is not designed for use in safety applications.

ULTRA-SLIM BODY AREA SENSOR

SPECIFICATIONS

Emitter: 0.6W or less,

Receiver: 0.9W or less

NPN open-collector transistor

•Maximum sink current: 100mA

•Applied voltage:

30V DC or less

(between output and 0V)

•Residual voltage:

1V or less (at 100mA sink current)

0.4V or less (at 16mA sink current)

PNP open-collector transistor

•

Maximum source current: 100mA

•Applied voltage:

30V DC or less

(between output andV)

•Residual voltage:

1V or less (at 100mA source current)

0.4V or less (at 16mA source current)

Pioneer in Sensor Systems

SUNX Limited

2431-1 Ushiyama-cho, Kasugai-shi,

Aichi, 486-0901, Japan

Phone: +81-(0)568-33-7211

FAX: +81-(0)568-33-2631

Overseas Sales Dept.

Phone: +81-(0)568-33-7861

FAX: +81-(0)568-33-8591

Printed on 100% recycled paper

All information is subject to change without prior notice.

Internet home page

http://www.sunx.co.jp/

No. CE-NA1PK5-10 February, 2000PRINTED IN JAPAN

I/O CIRCUIT DIAGRAM

NA1-PK5 NPN output type

Note: The emitter is not incorporated with the output.

Symbols ... D: Reverse supply polarity protection diode

ZD: Surge absorption zener diode

Tr : NPN output transistor

E: Job indicator

Non-contact voltage or

NPN open-collector transistor

Low (0 to 2V): Lights up or Blinks

High(5 to 30V, or open): Lights off

The illustration at the left shows

the receiver bracket.

The emitter bracket is shaped

symmetrically.

mFor PNP output type, please contact our office.

SENSING CHARACTERISTICS (TYPICAL)

Parallel deviation

Receiver

Emitter

•Vertical direction

Setting on

LONG

Setting on

SHORT

50100 0 50 100

Down UpCenter

Operating point ?(mm)

1.5

0.5

Setting distance L (m)

Vertical direction

Horizontal direction

Receiver

Emitter

Angular deviation

Receiver

Emitter

•Setting on LONG

Receiver

angular

deviation

Emitter

angular

deviation

1020 0 10 20

Left RightCenter

Operating angle $( )°

1.5

0.5

Setting distance L (m)

•Setting on SHORT

•Horizontal direction

1020 0 10 20

Left RightCenter

Operating angle $( ° )

1.5

0.5

Setting distance L (m)

Receiver

angular

deviation

Emitter

angular

deviation

Setting on

LONG

Setting on

SHORT

50100 0 50 100

Left RightCenter

Operating point ?(mm)

1.5

0.5

Setting distance L (m)

Emitter angular deviation

Receiver angular deviation

Receiver

Emitter

DIMENSIONS (Unit: mm)

130140

Beam Channel 2

Beam Channel 3

Beam Channel 4

Beam Channel 5

Beam Channel 1

Stable incident beam

indicator (Green)

"3.7 cable 2m long

Operation indicator (Red)

Job indicator (Orange)

Operation

mode switch

2-"4.6 supplementary

mounting holes 1.1 deep

(on both sides)

2-"4.5 mounting holes with

M4 nut seats 3.3 deep

(1.1 deep on back side)

Receiver

( )

Notes: 1) The sensing range is the possible setting distance between the emitter and the

receiver. The sensor can detect an object less than 0.1m (0.05m when set to

SHORT) away.

Notes: 2) Obtain the current consumption by the following equation.

Current consumptionPower consumptionSupply voltage

(e.g.) When the supply voltage is 12V, the current consumption of the emitter is:

0.5W 0.042A12V c42mA.

OPTIONS

Designation Model No. Description

Sensor mounting

bracket

Sensor protection

bracket

Sensor mounting bracket Sensor protection bracket

• • •MS-NA1-1 MS-NA2-1 MS-NA3(-BK)

MS-N A1

S-NA 2

Indicators

Produkt Specifikationer

Mærke:	Panasonic
Kategori:	Ikke kategoriseret
Model:	NA1PK5PN

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic NA1PK5PN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panasonic Manualer

Panasonic CS-BKP Manual

1 Juli 2025

Panasonic CS_CU-E9CKP Manual

1 Juli 2025

Panasonic CQ-DPX151U Manual

30 Juni 2025

Panasonic CS-2C19BKP5G Manual

30 Juni 2025

Panasonic CS-C24 Manual

29 Juni 2025

Panasonic CS-12CKE Manual

29 Juni 2025

Panasonic CS-E15CKP Manual

27 Juni 2025

Panasonic CS-E12 Manual

27 Juni 2025

Panasonic CS-V24BKP Manual

24 Juni 2025

Panasonic CS-V18 Manual

24 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Schneider LUCD1XES Manual

4 Juli 2025

Ikea BLÄDDRARE 304.743.99 Manual

4 Juli 2025

NUX Komp Core Deluxe MKII Manual

4 Juli 2025

Ikea GRÖNAMARANT 204.604.25 Manual

4 Juli 2025

Rowenta Focus DW5121 Manual

4 Juli 2025

Racktime Baskit Breeze 2.0 Manual

4 Juli 2025

Schneider KSB32CP15D Manual

4 Juli 2025

Wiesenfield WIE-IN-100 Manual

4 Juli 2025

Ergotec PM-705N Manual

4 Juli 2025

Sol Expert 19590 Manual

4 Juli 2025