PCE Instruments PCE-WMH 3 Manual


Læs gratis den danske manual til PCE Instruments PCE-WMH 3 (6 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-WMH 3, eller vil du spørge andre brugere om produktet?

Side 1/6
Manual
Wood Moisturemeter
PCE-WMH3
www.pce-group-europe.com
PCE Deutschland GmbH & Co KG
Im Langel 4
Deutschland
D-59872 Meschede
Tel: 029 03 976 99-0
Fax: 029 03 976 99-29
info@warensortiment.de
www.pce-group-europe.com
- 10 -
This warranty becomes null and void if you fail to pack your
PCE-WMH3 in a manner consistent with the original product
packaging and damage occurs during product shipment.
This warranty does not cover: circumstance beyond our
companys control; service required as the result of unauthorized
modifications or service; misuse, abuse; failure to follow our
company operating or maintenance instructions.
Repair or replacement without charge is our companys only
obligation under this warranty. Our company will not be
responsible for any special, consequential or incidental damages
resulting from the purchase, use, or improper functioning of this
equipment regardless of the cause. Such damages for which our
companys will not be responsible include, but are not limited to,
loss of revenue or profit, downtime costs, loss of use of the
equipment, cost of any substitute equipment, facilities of services,
or claims of your customers for such damages.
Important
We recommend to prevent faulty result in measurements
please check your meter reading results within a adequate time
period by the dry oven test according DIN 52 183 Standard.
- 3 -
4. PREPARING THE INSTRUMENT
Use the WOOD TYPE button to select the appropriate wood
type group and the WOOD TEMP. button to set the wood
temperature. The temperature setting step is 2°C. Pressing and
holding the WOOD TEMP. button fast forwards the setting.
This can be used to quickly change the temperature setting e.g.
from -10°C to 40°C.
The most common European wood types are listed in a table
on the instrument.
All exotic wood types (270 species) listed in the users manual
(page 6 and next) are divided into 4 groups. During measurements
of moisture contents of exotic wood types the WOOD TYPE
should be set to:
- Group 1 - select 1
- Group 2 - select 2
- Group 3 - select 3
- Group 4 - select 4
5. SELECTING NEEDLES
We recommend that the length of the needles you use should
be about 25-30 % of the thickness of the timber. With this length
of needles the device displays the average moisture contents.
6. THE MEASUREMENT
To conduct measurements:
- press and hold for a while the ON/OFF button to turn the
instrument on,
- hammer the instrument into the wood, a line drawn between
the needles should be perpendicular to the fibers (the resis-
tance should be measured across the fibers),
- the strength used for hitting the wood should be appropriate to
the hardness of the wood, do not use excess force, hitting the
wood with the body of the device (when the needles have been
completely inserted into the wood) may damage the device,
- wait until the result stabilizes,
- read the result on the LCD,
- the instrument can be turned off by pressing and holding the
ON/OFF button or it will turn off automatically after
approx. 5 minutes.


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måleudstyr
Model: PCE-WMH 3

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-WMH 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig