PCE -CLL 1 Manual

PCE Måling -CLL 1

Læs gratis den danske manual til PCE -CLL 1 (3 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om PCE -CLL 1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com
Manual
Data Logger
PCE-CLL 1
GETTING STARTED
All you need to prepare are a PC running under Windows XP/ Vista/ 7/8(32 bi t or 64 bit) with
USB port and CD-ROM drive, the CD including Data Logger Graph software and driver, the
data logger itself and a 3.6V 1/2AA battery.
BATTERY INSTALLATION
Before using the data logger, you will need to install the 3.6V 1/2AA battery included in the
data logger standard kit. Besides, replacement batteries available from your supplier.
Following instructions left page to operate.
IMPORT NOTES
This series of data loggers offer a variety of different models and measurement parameters,
so in the sensor location, there will be different sensor e xtensions for different models that
you purchased, but this guide always can be suitable for the whole series of data loggers.
The product range is constantly being updated and new models added, and related
information is liable to change without notice. So if necessary, consult your supplier to get
the latest information and news.
Appearance of a product color is subject to actual purchase of product, and all the pictures
mentioned in this guide is only for reference.
To install the software and USB driver, you must have an administrator rights on
the host computer.
When the data logger is connected to the USB port, the battery inside the data logger is
discharged at a higher rate than normal. To conserve battery life, do not leave the data
logger connected to the USB port for a prolonged period of time.
SOFTWARE INSTALLATION
Install the Data Logger Graph software by placing the CD in the PC CD-ROM drive. If setup
program does not automatically run and start, double click the “setup.exe” file included on
the CD->Setup directory to start installing. Follow the on-screen prompts to complete
installation. You will see a new icon Data Logger Graph on your desktop. For further
information on the software, you can access the help menu on the software interface.
Please note that you must install the USB driver after completing the software installation to
use the data logger.
DRIVER INSTALLATION
After completing the software installation, make sure the CD is in your PC CD-ROM
drive. Double click the “USBXpressInstaller.exe” file included on the CD->Driver directory
to start installing. Follow the on-screen prompts to complete installation. You can now plug
the data logger to an available USB port on the PC, and a few minutes later, your computer
will appear successful message on the bottom right of the screen If the driver for this data
logger device has been installed normally.
2
WELCOME
This series of Direct-USB-Connection data loggers are designed to use very easily. This
Quick Start Guide covers preparation and use to assist you in getting the best results from
your data logger. Now follow this guide to start.
Now, you have successfully installed the necessary software and driver for your
data logger. Please continue to refer to next section of this document for a
guide on how to use the data logger for a task.
QUICK START GUIDE
FOR DATA LOGGERS
3
1
4
2
N
N
N
NNO
O
O
OOT
T
T
TTE
E
E
EE:
:
:
::
Make sure to align th is connector
with its othe r side when inst all the part.
1
3
5
USB Interface USB Cap
Yellow LED
Red/ Green LED
ButtonButton
Sensor Location
SETUP AND START
To use the data logger, take the following steps:
1. Make sure the battery is correctly installed, or if you use USB port to power the data
logger directly, you must not remove data logger from USB port when the data logger is
logging.
2. Insert the data logger into an available USB port of a PC which has installed the Data
Logger Graph software and driver.
3. Double click on the ”Data Logger Graph” icon on your Windows desktop. This will load
the Data Logger Graph sof tware. On the left top of the software, you can see button “Start”
and click on it. This will open dialog. “Data Logger Device”
4. Select data logger device that will be set(or default). Here you can check the firmware
version, status, etc. of the selected data logger device.
5. Click on the button to load dialog. Here you can follow “Setup” “Data Logger Setup”
the screen instructions and setup the data logger. On the “General”, you can set logger
name and sample rate. On the “Channel Settings”, you can set high/low limit, enable/disable
alarm, and enable/disable alarm hold. On the “Start and Stop Method”, you can select how
to start and stop logging. Or all settings can be factory default if first attempts.
6. Click on the button. The data logger will start according to your settings. “Finished”
7. Remove the data logger from PC USB port except USB port will be used as power supply
as your required.
DATA DOWNLOAD
1. When a task is finished, you can download data to PC. Do according to step 2 to 4 of
“SETUP AND START” firstly, and then click on the button on the “Download” “Data
Logger Device” dialog. Here you can follow the screen instructions to download and save
the data to PC. Please note that you need to input correct password to operate this step if
the data logger has been set a password before(No for factory default).
2. After downloading finished, a “Downloading Finished” dialog will be shown, user can
click the “Open” button to graph the downloaded data.

Produkt Specifikationer

Mærke: PCE
Kategori: Måling
Model: -CLL 1

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE -CLL 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Måling PCE Manualer

PCE

PCE -ECT 50 Manual

13 December 2024
PCE

PCE -779N Manual

6 December 2024
PCE

PCE -CLL 1 Manual

3 December 2024
PCE

PCE -IVE 320 Manual

3 December 2024
PCE

PCE -IVE 330 Manual

3 December 2024

Måling Manualer

Nyeste Måling Manualer

Kern

Kern ORA 3HA Manual

30 Juli 2025
Phoenix Contact

Phoenix Contact EEM-XM377 Manual

30 Juli 2025
Extech

Extech 475040-SD Manual

30 Juli 2025
Extech

Extech 475044-SD Manual

30 Juli 2025
Phoenix Contact

Phoenix Contact EEM-XM357 Manual

29 Juli 2025
Teslong

Teslong TM160P Manual

29 Juli 2025
Mitsubishi

Mitsubishi SRK25MWKH1 Manual

27 Juli 2025
Mitsubishi

Mitsubishi SRK50EEC1 Manual

27 Juli 2025
Mitsubishi

Mitsubishi SRK35RE1 Manual

27 Juli 2025
Ridgid

Ridgid RT-3 Manual

27 Juli 2025