Peavey SP 218 Manual
Læs gratis den danske manual til Peavey SP 218 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Peavey SP 218, eller vil du spørge andre brugere om produktet?
Side 1/8

www.peavey.com
SP 218®
Passive Sub
Product
Specications
ENGLISH
Description
e SP® 218 is a subwoofer designed to enhance the low-end in the SP Series or other full-range speaker systems. Other
uses include bass guitar, keyboard and drum monitoring. is loudspeaker system delivers high output, low distortion bass
from two 18” Pro Rider woofers mounted in a vented enclosure. is unit is designed for portability. e enclosure is con-
structed of hardwood plywood augmented with internal braces with a textured black painted nish. A full-length, wrap-
around perforated steel grille protects the front of the enclosure. Tilt-back casters are mounted at the rear bottom corner
to assist in portability. A pole mount plate is located on the right hand side of the enclosure, with an insert for a threaded
pole, using M20 threads. e threaded pole is included. Rubber feet and corner casters on the bottom and a corner handle
on top make moving the enclosure an easy, one-person operation.
Inputs are at the rear of the enclosure and consist of two 1/4” jacks, one four-pin twist-lock non-switching jack and one
Neutrik® Speakon® switching jack. e enclosure input is congurable, with the default being 4 ohms with both drivers in
parallel when using the parallel inputs. A dual-woofer 2 x 8 ohm conguration is available through the switching Neutrik®
jack, which disconnects the 4 ohm inputs and provides separate inputs to the woofers when used. is ingenious input de-
sign provides maximum exibility for single-or dual-amplier operation, without having to manually rewire the enclosure.
is low frequency enclosure is comprised of two 18” Pro Rider® subwoofer drivers in a vented alignment. e Pro Rider
driver delivers superior performance due to its advanced cooling system, large 4” voice coil with edge-wound aluminum
wire and high performance cone. is design provides strong bass extension and high power handling to complement a
full-range sound system.
As the SP 218 does not include a passive subwoofer crossover, input should be electronically ltered for subwoofer appli-
cations. In addition, for high power operation, a high-pass lter set at 36 Hz and using a 24 dB/octave Linkwitz-Riley lter
should be used to improve performance and reliability.
Features
• Two 18” Pro Rider® woofers
• 2,400W program, and 4,800W peak power handling
• Low frequency response down to 41 Hz.
• Inputs include one four-pin twist lock connector and two 1/4” phone jacks all in parallel, and one Neutrik®
Speakon® switching jack for independent access to the woofers
• readed pole for mount included
• Pole mount plate built-in, threaded for positive pole support
• Full-length, wrap-around perforated steel grille
• Tilt-back casters

SPECIFICATIONS
Frequency response, 1 meter on-axis, swept-sine in anechoic environment:
51 Hz to 210 Hz (±3 dB)
Usable low frequency limit (-10dB point):
41 Hz
Power handling:
1,200 watts continuous 2,400 watts program 4,800 watts peak
Sound pressure level, 1 watt, 1 meter in anechoic environment:
99 dB SPL (2.00 V parallel input)
Maximum sound pressure level (1 meter):
Anechoic: 129 dB SPL continuous 135 dB SPL peak
Half-space: 135 dB SPL continuous 141 dB SPL peak
Radiation angle measured at -6 dB point of polar response:
Essentially omnidirectional
Transducer complement:
2 x 18” woofer, vented Pro Rider® 1808-8 ALCP
Box tuning frequency:
38 Hz
Minimum recommended active crossover frequency and slope for bi¬amping:
100 Hz at 24 dB/octave Linkwitz-Riley Low pass lter
Recommended Infra-sonic Filter:
36 Hz (-6 dB point) 24 dB/octave Linkwitz-Riley High-pass.
Impedance ( Z ):
Parallel input: nominal 4.0 Ω, minimum: 3.1 Ω
Dual-woofer input: nominal 2 x 8.0 Ω, minimum: 2 x 6.2 Ω
Input connections:
Full range: two 1/4” phone jacks, one four-pin, twist lock jack, one four-pin Neutrik® SpeakOn® switching jack
for independent access to each woofer..
Enclosure materials & nish:
Plywood with internal bracing nished in black textured paint. Full length black powder coated metal grille.
Dimensions (H x W x D):
Height: 47.28 “ / 1201 mm Width: 20.38” / 518 mm Depth: 26.81” / 681 mm
Net Weight:
135 lbs. (61.3 kg)
Produkt Specifikationer
Mærke: | Peavey |
Kategori: | Højttaler |
Model: | SP 218 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Peavey SP 218 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Højttaler Peavey Manualer
15 November 2024
12 November 2024
18 September 2024
15 September 2024
14 September 2024
31 August 2024
22 August 2024
16 August 2024
14 August 2024
11 August 2024
Højttaler Manualer
- Nebula
- JB Systems
- Real-El
- PSB
- Sanus
- Avid
- SunBriteTV
- Crest Audio
- James
- GMB Audio
- Adler
- Craftsman
- ABRAMTEK
- Be Cool
- DB Drive
Nyeste Højttaler Manualer
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025
17 Juli 2025