Peerless-AV EWMU Manual

Peerless-AV Ikke kategoriseret EWMU

Læs gratis den danske manual til Peerless-AV EWMU (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Peerless-AV EWMU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Wind Rated Tilt Wall Mount

for 32" to 65" Outdoor Flat Panel Displays

Peerless’ Wind Rated Outdoor TV Mount is tough enough to handle rough weather, but it’s

still remarkably quick to install with its hook-and-hang design. Wind rated up to 110mph, it’s

constructed from heavy gage steel, and sealed with corrosion resistant E-Coat. Complete

with stainless steel tamper resistant hardware that is Sorted-For-You™ for simplied installation

to wood studs, concrete or cinder block. It’s the mount designed to hold an outdoor TV in

any environment.

Screen size: 32"-65" Max load: 200lb (90.7kg)

EWMU(-S)

 Universal mounting

pattern – 28.39"W x 17.67"H

(721 x 449mm) VESA® up to

600 x 400mm

 Wind rated up to 110 mph,

elevation 200ft (60m),

Category “D”

 Fixed incremental tilt with

angle settings at 0°, 2°, 5°,

10° or 15°

 Hook-and-hang design for

simplied installation

 Up to 8" of horizontal

positioning

CLICK: CALL: FAX: www.peerlessmounts.com 800.865.2112 708.865.2941

FeAtureS

VIewIng AngLe FLeXIbILIty

Incremental tilt settings enable

the best viewing angle

SImpLe Set-up

Hook-and-hang design helps

make installation quick and easy

Adjustable tilt can easily

be set up to 15° forward and 5° back

CAbLe mAnAgement

Allows for power outlet

installation or cable pass

through from outer wall

to inside power source

A R C H I T E C T S S P E C I F I C A T I O N S

The Peerless Wind Rated Tilt Wall Mount for Outdoor Flat Panel Displays shall be a Peerless model number EWMU, EWMU-S and located where indicated on the plans.

Assembly and installation shall be done according to instructions provided by the manufacturer. Mount is made of heavy gauge cold rolled steel.

Mount is nished with textured black or gloss ASA-70 gray protective paint.