Peerless-AV THR-200-STAND Manual


Læs gratis den danske manual til Peerless-AV THR-200-STAND (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Peerless-AV THR-200-STAND, eller vil du spørge andre brugere om produktet?

Side 1/8
12020-05-28 #:126-9256-2 (2020-06-02)
ENG
THR-200-STAND
22020-05-28 #:126-9256-2 (2020-06-02)
Do not overtighten screws.
ENG
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least
three full turns and t snug.
ENG
Tools Needed for Assembly.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
5/16"
(8mm)
3/8"
(10mm)
ENG - This product is designed to be installed on wood stud or solid concrete oors. Hardware is included for
wood stud and solid concrete installation. Before installing make sure the supporting surface will support the
combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or
damage can occur and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or
mechanical lifting equipment to safely lift and position equipment. This product is intended for indoor use only.
Use of this product outdoors could lead to product failure or personal injury. Be careful not to pinch ngers when
operating the mount. For support please call customer care at 1-800-865-2112.
WARNING


Produkt Specifikationer

Mærke: Peerless-AV
Kategori: Ikke kategoriseret
Model: THR-200-STAND

Har du brug for hjælp?

Hvis du har brug for hjælp til Peerless-AV THR-200-STAND stil et spørgsmål nedenfor, og andre brugere vil svare dig