Perfect Aire 1PAFD6 Manual


Læs nedenfor 📖 manual på dansk for Perfect Aire 1PAFD6 (4 sider) i kategorien Ventilator. Denne guide var nyttig for 21 personer og blev bedømt med 4.6 stjerner i gennemsnit af 11 brugere

Side 1/4
MODEL 1PAFD6
OWNERS MANUAL
6" 2-IN-1 CLIP-ON
OR TABLE FAN
2
ASSEMBLY / OPERATION
FAN ASSEMBLY
A. To convert the clip fan into a desk fan:
1. Disassemble the clip by loosening
the buttery head screw.
2. Attach plastic base to the fan head,
match locking tab to base, click into
position.
3. Tighten the buttery head screw
to secure.
B. To convert from the desk fan to a clip fan:
1. Detach buttery head screw
from base of the fan.
2. Remove base and attach clip to
the fan head.
3. Tighten the screw into the clip base
to secure the fan to the clip.
ASSEMBLY INSTRUCTIONS
Attach the motor assembly to the angle adjusting joint with the buttery head screw and nut.
OPERATING INSTRUCTIONS
1. Fan speed is controlled by the rotary switch: 1 (Low) - 0 (O) - 2 (High), the air ow can be
adjusted upward or downward by loosening the angle adjusting joint. Re-tighten knob securely.
2. The direction of air ow can be adjusted by turning the rotary joint.
3. Plug the power supply cord into a wall outlet.
CAUTION Read Rules for Safe Operation and Instructions Carefully.
WARNING
To reduce the risk of re or electric shock, do not use this fan with any solid-state control device.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to t in a polarized outlet only one way. If plug does
not t, contact a qualies electrician. Do not tamper with this safety feature.
Do not leave the fan running unattended.
READ AND SAVE THESE INSTRUCTIONS


Produkt Specifikationer

Mærke: Perfect Aire
Kategori: Ventilator
Model: 1PAFD6

Har du brug for hjælp?

Hvis du har brug for hjælp til Perfect Aire 1PAFD6 stil et spørgsmål nedenfor, og andre brugere vil svare dig