Philips 14PV184 Manual


Læs gratis den danske manual til Philips 14PV184 (12 sider) i kategorien televisión. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Philips 14PV184, eller vil du spørge andre brugere om produktet?

Side 1/12
&
The remote control
STANDBY mStandby
CLEAR Reset/clear
0-9 Digit buttons 0-9
SV/V+ ’VIDEOPlus+’ programming
TIMER kTIMER programming on the set
MENU Call menu
OK Confirm button
D/C/A/B Menu left/right/up/down
Sp Volume control
PpProgramme number Plus/Minus
MUTE yMute sound
GPLAY Playback
HRewind/Reverse scanning
STOP hPause/Stop
IForward wind/ Forward scanning
INDEX EIndex search
RECORD nRecord
STILL RStill picture
TRANSP. -TELETEXT transparent
TELETEXT eTELETEXT on/off
CLOCK .TELETEXT clock time
In TELETEXT you can store the relevant page with the
OK button.
Selecting TELETEXT functions: when you are in
TELETEXT, press the MENU button. Select the
required function with the Dand the Cbuttons.
Confirm with the OK button.
Front of the set
mStandby
PpProgramme number Plus/Minus
Sp Volume control
5Record
HRewind/Reverse scanning
hPause/Stop
GPlayback
IForward wind/ Forward scanning
JCassette eject
wHeadphones socket
AUDIO Audio input socket
VIDEO Video input socket
OPERATING INSTRUCTIONS IN BRIEF
&
Programming with ’VIDEOPlus+’
All the information required for programming is encoded in the ’VIDEOPlus+’ code.
1Press the SV/V+ button on the remote control.
2Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the CLEAR button.
3If you want to repeat programming at daily or weekly intervals, select the required settings in
the ’DAILY/WEEKLY’ line.
’Daily’ programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the ’PROGRAMME NR.’ line appears when you
enter the VIDEOPlus+ code. Enter the required programme number.
5Confirm with the OK button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
6Press the STANDBY mbutton.
How to enter, check or clear a TIMER-block manually
1Press the TIMER kbutton.
2Select a free TIMER block or the TIMER block you want to check or clear.
3Clear: Press the CLEAR button.
4Enter/Check: Press the Dor Cbutton to switch between ’DATE’ (date), ’DW’ (daily, weekly),
’PR’ (programme number), ’START’ (start time) and ’END’ (end time).
Press the Aand the Bor the 0-9 buttons to change the data.
5To end programming, press the MENU button.
6Press the STANDBY mbutton.
Selecting a TV channel
Select the required TV channel (= programme number) with the Ppbutton or the 0-9 but-
tons on the remote control.
The selected programme number (e.g.: ’P 01’ ) appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the Sp button.
If you want to mute the sound temporarily (e.g.: during a telephone call), press the MUTE ybut-
ton on the remote control. When you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
1Press the MENU button.
2Select and confirm the line ’PICTURE’ .
3Select and confirm the TV screen setting.
Note: In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.


Produkt Specifikationer

Mærke: Philips
Kategori: televisión
Model: 14PV184

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips 14PV184 stil et spørgsmål nedenfor, og andre brugere vil svare dig




televisión Philips Manualer

televisión Manualer

Nyeste televisión Manualer