Philips 170B5CB Manual

Philips Skærm 170B5CB

Læs gratis den danske manual til Philips 170B5CB (90 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Philips 170B5CB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/90

Operation Guide 3224

MA1006-EA

About This Manual

Depending on the model of your watch, display text •

appears either as dark ﬁgures on a light background, or

light ﬁgures on a dark background. All sample displays

in this manual are shown using dark ﬁgures on a light

background.

Button operations are indicated using the letters shown •

in the illustration.

Each section of this manual provides you with the •

information you need to perform operations in each

mode.

Note that the product illustrations in this manual are •

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

General Guide

Press •B to change from mode to mode.

After you perform an operation in any mode, pressing •B returns to the Timekeeping

Mode.

Timekeeping Mode Alarm Mode Stopwatch Mode Time Setting Mode

Press .B

The watch returns to the Timekeeping Mode automatically if you do not perform any •

button operation for one or two minutes in the Alarm Mode and Time Setting Mode.

In any mode, press •C to illuminate the display.

Timekeeping

Use the Timekeeping Mode to view the current time and

date.

Day of the week is displayed as follows. •

SU : Sunday MO : Monday

TU : Tuesday WE : Wednesday

TH : Thursday FR : Friday

SA : Saturday

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to switch between the A

12-hour and 24-hour formats.

With the 12-hour format, the •PM indicator appears for

times in the range of noon to 11:59 p.m. and no indicator

appears for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with •24H

indicator.

Alarm

When the Daily Alarm is turned on, the alarm sounds for

20 seconds at the preset time each day. When the Hourly

Time Signal is turned on, the watch beeps every hour on

the hour.

All of the operations in this section are performed in the •

Alarm Mode, which you enter by pressing .B

To set the alarm time

In the Alarm Mode, press 1. . The hour digits ﬂash C

because they are selected.

This operation automatically turns on the alarm. •

PM indicator

Day of week

Day

Hour : Minutes Seconds

Alarm on indicator

Hourly time signal

on indicator

Alarm time

(Hour : Minutes)

Mode indicator

Stopwatch

The Stopwatch Mode lets you measure elapsed time, split

times, and two ﬁnishes. The range of the stopwatch is

59 minutes, 59.99 seconds.

The stopwatch continues to run, restarting from zero after •

it reaches its limit, until you stop it.

The stopwatch measurement operation continues even if •

you exit the Stopwatch Mode.

Exiting the Stopwatch Mode while a split time is frozen •

on the display clears the split time and returns to elapsed

time measurement.

All of the operations in this section are performed in the •

Stopwatch Mode, which you enter by pressing .B

Mode indicator

Minutes

1/100 second

Seconds

Press 2. to change the selection in the following sequence.C

MinutesHour

Normal Alarm Mode (No digit ﬂashes)

Press 3. to increase the selected digits. Holding down changes the number at A A

high speed.

The format (12-hour and 24-hour) of the alarm time matches the format you select •

for normal timekeeping.

When setting the alarm time using the 12-hour format, take care to set the time •

correctly as morning or afternoon ( ).PM

After you set the alarm time, use 4. to return to the Alarm Mode.C

If you do not operate any button for one or two minutes while a selection is ﬂashing, •

the ﬂashing stops and the watch goes back to the Timekeeping Mode automatically.

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch the Daily Alarm and Hourly Time Signal on and off

Press while in the Alarm Mode to change the status of the Daily Alarm and Hourly A

Time Signal in the following sequence.

Both on Both off Daily Alarm only Hourly Time

Signal only

To test the alarm

Hold down while in the Alarm Mode to sound the alarm.A

To measure times with the stopwatch

(a) Elapsed time measurement

A A A A C

Start Stop Re-start Stop Clear

(b) Split time measurement

A C C A C

Start Split

( displayed)SPL

Split release Stop Clear

A C A C C

Start Split

First runner

ﬁnishes.

Display time of

ﬁrst runner.

Stop

Second runner

ﬁnishes.

Split release

Display time of

second runner.

Clear

Time Setting

Use the Time Setting Mode to set the current time and

date.

To set the time and date

Use 1. to enter the Time Setting Mode.B

The second’s digits ﬂash because they are selected. •

Press 2. to change the selection in the following C

sequence.

MinutesSeconds

Month

Hour

Day

Day of

the Week

While the second’s digits are selected (ﬂashing), press 3. to reset the seconds to A

. If you press while the second’s count is in the range of 30 to 59, the seconds A

are reset to and 1 is added to the minutes. If the second’s count is in the range of

00 to 29, the minute’s count is unchanged.

While any other digits (besides seconds) are selected (ﬂashing), press 4. to A

increase the number. While the day of the week is selected, pressing advances A

to the next day. Holding down changes the current selection at high speed.A

After you set the time and date, press 5. to return to the Timekeeping Mode.B

If you do not operate any button for one or two minutes while a selection is ﬂashing, •

the ﬂashing stops and the watch goes back to the Timekeeping Mode automatically.

PM indicator

Day of week

Day

Hour : Minutes Seconds

Produkt Specifikationer

Mærke:	Philips
Kategori:	Skærm
Model:	170B5CB
Produktfarve:	Sort
Skærm diagonal:	17 "
Skærmopløsning:	1280 x 1024 pixel
Berøringsskærm:	Ingen
Responstid:	16 ms
Synsvinkel, horisontal:	160 °
Synsvinkel, vertikal:	140 °
Relativ luftfugtighed ved drift (H-H):	20 - 80 %
Panel montering grænseflade:	100 x 100 mm
Strømforbrug (typisk):	33 W
Bredde (uden stativ):	375 mm
Dybde (uden stativ):	210 mm
Højde (uden stativ):	431 mm
Vægt (uden stativ):	5400 g
Driftstemperatur (T-T):	5 - 40 °C
Skærm:	LCD
Certificering:	CE-markering, E2000, EMC, FCC-B, UL, CSA, NUTEK, Energy Star, SEMKO, TCO '99, TÜV/GS, TÜV Ergo
Skærmens lysstyrke (typisk):	250 cd/m²
Kontrastforhold (typisk):	450:1
Pixel pitch:	0.264 mm
Synlig størrelse, horisontal:	338 mm
Synlig størrelse, vertikal:	270 mm
Horisontal scanningsområde:	30 - 82 kHz
Drejevinkel område:	-5 - 25 °
Vertikalt scanningsområde:	56 - 76 Hz
Sikkerhedsfunktioner:	Kensington-slot
Højttaler og mikrofon:	2 W RMS x 2 stereo
Medfølgende hardware:	AC Power Cord, VGA Cable, Audio Cable