Philips 49BDL4150D Manual

Philips Skærm 49BDL4150D

Læs gratis den danske manual til Philips 49BDL4150D (77 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Philips 49BDL4150D, eller vil du spørge andre brugere om produktet?

Side 1/77
www.philips.com/welcome
49BDL4150D
55BDL4150D
V1.00
User Manual (English)
ii
Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specied in this documentation may result in exposure to
shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your display:
Operation:
Keep the display out of direct sunlight and away from stoves or any other heat sources.
Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.
Do not block the ventilation holes on the cabinet.
When positioning the display, make sure the power plug and outlet are easily accessible.
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation.
Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
Do not subject the display to severe vibration or high impact conditions during operation.
Do not knock or drop the display during operation or transportation.
The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour. Prolong usage is
prohibited. Please keep a clear safety area under the display while using the eye bolt.
Maintenance:
To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do
not lift the display by placing your hand or ngers on the LCD panel.
Unplug the display if you are not going to use it for an extensive period of time.
Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never
use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively moist environment.
If your display becomes wet, wipe it with dry cloth as soon as possible.
If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord. Then remove the foreign substance
or water, and send the unit to the maintenance center.
Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the display in a location that falls
within the following temperature and humidity ranges.
-Temperature: 0-40°C 32-104°F
-Humidity: 20-80% RH
LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic screen refresh
application if the unit will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”,
also known as after-imaging” or “ghost imaging”, on your screen. This is a well-known phenomenon in LCD panel technology. In most cases, the “burned
in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. This is also not covered under the
terms of your warranty.
Service:
The casing cover should be opened only by qualied service personnel.
If there is any need for repair or integration, please contact your local service center.
Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your
local service center.


Produkt Specifikationer

Mærke: Philips
Kategori: Skærm
Model: 49BDL4150D
Vekselstrømsindgangsspænding: 100 - 240 V
Vekselstrømsindgangsfrekvens: 50/60 Hz
Bredde: 1104.2 mm
Dybde: 65.4 mm
Højde: 637 mm
Vægt: 20900 g
Produktfarve: Sort
Skærm diagonal: 49 "
Skærmopløsning: 3840 x 2160 pixel
Berøringsskærm: Ingen
Wi-Fi: Ingen
USB-port: Ja
HD-type: 4K Ultra HD
Naturligt aspektforhold: 16:9
Skærmens lysstyrke: 500 cd/m²
Responstid: 8 ms
Synsvinkel, horisontal: 178 °
Synsvinkel, vertikal: 178 °
Skærm diagonal (metrisk): 123.2 cm
Indbyggede højttaler(e): Ja
Opbevaringstemperatur (T-T): -20 - 60 °C
Relativ luftfugtighed ved drift (H-H): 20 - 80 %
Relativ luftfugtighed ved opbevaring (H-H): 5 - 90 %
Udgangseffekt (RMS): 20 W
Antal HDMI-porte: 3
DVI-port: Ja
Ethernet LAN-porte (RJ-45): 1
Ethernet LAN: Ja
Skærmvisning (OSD): Ja
Antal OSD sprog: 18
OSD-sprog: ARA,CHI (SIMPL),CHI (TR),DAN,DEU,DUT,ENG,ESP,FIN,FRE,ITA,JPN,NOR,POL,POR,RUS,SWE,TUR
Understøttede videoformater: ASF,AVI,DAT,FLV,MKV,MP4,MPEG,TS,VOB,WMV
Understøttede lydformater: AAC,M4A,MP3,WMA
VESA montering: Ja
Panel montering grænseflade: 400 x 400 mm
Strømforbrug (standby): 0.5 W
Strømforbrug (typisk): 93 W
Driftstemperatur (T-T): 0 - 40 °C
Intern hukommelse: 4 GB
Hurtig start guide: Ja
Kabler inkluderet: AC,RS-232
Batterier inkluderet: Ja
Operativsystem installeret: Android 7.1.2
Understøttede billedformater: BMP,JPEG,JPG,PNG
Fjernbetjening inkluderet: Ja
Certificering: CE\nUL/cUL\nBSMI\nCB\nCU\nEnergyStar 8.0\nFCC A\nPSB\nRCM
Antal indbyggede højttalere: 2
Pc lydindgang: Ja
USB version: 2.0/3.2 Gen 1 (3.1 Gen 1)
Understøttet placering: Indendørs
Bæredygtighedscertifikater: RoHS,ENERGY STAR
Processorserie: ARM Cortex
Driftshøjde: 0 - 3000 m
Formål: Universel
Intern lagerkapacitet: 16 GB
Vis antal farver: 1.073 milliarder farver
Maksimal opdateringshastighed: 60 Hz
Kontrastforhold (typisk): 1100:1
Pixel pitch: 0.27963 x 0.27963 mm
HDMI-version: 2.0
Antal DisplayPorts: 2
Produktdesign: Digital fladpaneldisplay
VGA (D-Sub) indgangsporte: 1
Fjernbetjening (IR) indgang: 1
Fjernbetjening (IR) udgang: 1
Antal HDMI-indgangsporte: 3
Computersystem: Ja
RS-232C: Ja
Antal DVI-D-porte: 1
Facet bredde (bund): 15.8 mm
Facet bredde (øverste): 12.2 mm
Orientering: Horisontal/vertikal
Facet bredde (side): 12.7 mm
DisplayPorts indgang: 1
DisplayPorts udgang: 1

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips 49BDL4150D stil et spørgsmål nedenfor, og andre brugere vil svare dig