Philips HTL1042 Manual

Philips Soundbar HTL1042

Læs gratis den danske manual til Philips HTL1042 (1 sider) i kategorien Soundbar. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Philips HTL1042, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
Warranty
1. Proof of purchase s ot omp ied with this warranty rd. i n acc an ca
2. The warranty card is not completed immediately after purchase.
3. The apparatus is not used according to this user manual.
4. Defects re used due to proper or reckless use. a ca im
5. Any repairs are done by persons other than Philips authorized service centre.
6. The serial number is tampered with.
7. Defects due to uses beyond ca control like light g, bnormal oltage or while tr sit to the nin a v in an
Product Sl. No.
Model No.
Invoice Number
Date of Purchase: / /
Customer’s Name and address:
PIN:
Always there to help you!
Visit us at www.support.philips.com
Helpline: 1800 425 6396
Email: india.callcentre@tpv-tech.com
(10 a.m. to 9 p.m. Mondays to Saturdays & 10
a.m. to 6 p.m. on Sundays)
Deal r e Name & S :tamp
This Philips soundbar is warranted against any defect due to defective materials or workmanship for 12 months
from the date of purchase, should a defect develop during the warranty, TPV Technology India Pvt. Ltd.,
its authorized service center in India.
FREE OF CHARGE at any of
10987 11 12
总尺寸：660x173mm
工艺：风琴折 铜版纸双面印刷 105g
成品尺寸：110x86.5mm
30408L000309-002
成品正面： 成品背面：
Soundbar
HTL1042
SOUNDBAR
HTL1042
User manual
System sipo tioning :
The soundbar is recommended to be put on
the at desktop to get a better acoustic eect.
Helpful Hint:
- To avoid magnetic interference, do not position
the speakers, too close to your TV.
Playing the speakers
Audio source / player
SOUNDBAR
General information
Safety instructions
Plea r carefully t safety mark on se ead he the back side
This mark is intended to alert the user from
the non isolated dangerous voltage within the
constitute a risk of electric shock to persons.
This mark is intented to alert the user for
important operating and servicing instruction.
Warnings
•
Avoid sustained periods on high-volume use, and
do not turn the volume to maximum level while using
high output signal, such as Mobile Phone or DVD,
etc., as this will cause distortion and may damage the
loudspeaker cones.
•
when not in use.
• Do not open the cover or back panel to avoid
electrical shock or any other accidents. No user-
serviceable parts are inside.
• Only for indoor use.
• Plug the system to the AC outlet with the right voltage
marked on the back panel of the Subwoofer.
•The MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Accessories
The product shall not be exposed to dripping or splashing
be placed on the product.
•
Connections
Soundbar back panel
Top panel operation
Remote controls
* AVAILABLE IF CONNECTED
Bluetooth Operating Instruction
1. The set will go into bluetooth mode automatically after turnning on (or short press
[POWER] : select Bluetooth mode), Bluetooth mode indicator light will ash.
2.Select Bluetooth function of mobile devices (mobile phones, computers, etc.)
and search for Bluetooth devices“Philips HTL1042”.
3.Click manually, the device will automatically pair and connect, and giving out a
beep sound, Bluetooth mode indicator will become solid white in the mean time.
4.The paired device will be connected automatically next time when turning on the set.
5.When connecting with other bluetooth devices, press [PLAY] for 3 seconds, it will
come out with a pairing sound and enter into Bluetooth pairing mode, and the
indicator light in the bluetooth mode changes from solid white to falshing white.
6.After connecting to the phone, the white light will be on (include play/pause).
If it is not connected to the phone, the white light will be on slowly.
Troubleshooting
Problem Solution
1. No power.
2. No sound or distorted sound.
3. The remote control does not
function properly.
4. Low hum or buzz sound.
drive cannot be read.
6. Slow operation of the USB
Check if the AC power cord is properly inserted into the AC mains socket.
Adjust the volume / select the correct source to choose the equipment
that you want to hear through the system.
Reduce the distance between the remote control and the system. Replace
the batteries with new ones / Point the remote control directly towards the
IR sensor (located on front panel of the subwoofer) / Check that the batteries
Place the product as far away as possible from electrical devices that may be
causing interference / Check power supply voltage and consult electrician.
Drive is
7. BT not working. Reduce the distance or device is not paired.
Warning -
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
below before taking the system for repair. If you are unable to remedy the problem by following hints
mentioned in below table.
and play. / Take out USB drive and insert it again properly.
Total system power 40W RMS
Separation
SNR
Audio input socket
Audio- 2RCA cable
Power consumption
10.8 W
Soundbar 3 Way
Speaker size
4070 * 2 + 2.75 inches * 2
Impedance 8 Ohm + 8 Ohm
Frequency range 45Hz - 20KHz
Dimension (mm) W x H x D
420 x 73 x 100
Weight kg1.97
BT versio V5. n 0
BT range
USB max capacity
playability
Up to 32GB
Up to 10 meters
MP3 track
> db55
>40db
(1)
(2)
(8)
(4)
(5)
(9)
(14)
(12)
(3)
(7)
(10)
(11)
(13)
(6)
(6)
1. : long press: turn on/o; short press after turn on: mode selection.
2. : short press: volume increase; long press: Continuous increase.
3. : short press: volume decrease; long press: Continuous decrease.
4. : BT mode short press: play/ pause; long press: BT Pair.
5. : USB* mode: short press: nest song; long press: fast forward.
6. : USB* mode: short press: previous song; long press: fast backward.
1. DC 15V/1.66A Input.
2. Headphone output.
3. Input Connect to sound sources such as computer, CD player, MP3, etc.
4. HDMI ARC Input.
5. Optical Input.
6. USB* slot.
Switch to USB mode after inserting USB, press [POWER] key to switch to USB* mode,
USB mode indicator will on, supporting MP3 format music playback.
USB
Switch to audio mode after inserting the audio cable, press [POWER] to switch to
audio mode, and the audio mode indicator will on.
AUDIO IN
Switch to HDMI ARC mode after inserting HDMI cable, press [POWER] to switch to
HDMI ARC mode, and the indicator will on.
HDMI ARC
After inserting the optical, press the [POWER] key to switch to the Optical mode, and
the Optical mode indicator will on.
OPTICAL
(2)(1) (5)(3) (4) (6)
RESET MUTE
VOL-
BT
AUD
BASS
USB
ARC OPT
VOL+
1. : Power ON or Standby mode.
2. RESET: To set the bass and volume to default level.
3. MUTE: Turn volume o. Short press again to activate.
4. VOL+: To increase the Volume by short or long press VOL+.
5. : Play the previous song by pressing “ ” but not in audio mode.
6. : Play/pause in USB*/BT mode and MUTE in audio mode.
7. : Play next song by pressing “ ”, but not in audio mode.
8. VOL-: To decrease the Volume by short or long press VOL-.
9. BT: Bluetooth mode.
10. ARC: HDMI ARC mode.
11. OPT: Optical mode.
12. AUD: Audio input mode.
13. USB: USB* mode.
14. BASS: bass increase/ bass back to normal.
User ma alnu
DC 15V/1.66A
(5) (2) (1)(4) (3)
Care and safety information
Avoid high temperatur , mo ture, water and stes is du
•
Apparatus should not be exposed to dripping or
splashing of liquid.
• Do not place any source of danger on the Subwoofer,
• Do not install near heat sources.
Do not block any ventilation opening
•
Place the apparatus in a location with adequate
ventilation to prevent internal heat build up. Allow at
least 10cm (4 inches) of free space all around the
apparatus for adequate ventilation.
• At high volume the back cover of Subwoofer becomes
hot. Do not touch it.
Care of the cabinet
•
Use a soft cloth slightly moistened to clean the cabinet.
Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
•
Attentio should be draw to the environmental n n
aspects of batter disposal.y
• Batteries shall not be exposed to e essive heat such s xc a
***Do NOT u se US B for charging devices which can cause damage to
you external devicer s.thank you.
U S B
BT AUDIO IN MUTEOPT ARC
1. 2. RESET 3. MUTE 4. VOL+ 5. 6. 7.
8. VOL- 9. BT 10. ARC 11. OPT 12. AUD 13. USB 14. BASS
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be o,
if there is no operation after 90 seconds of stand by mode.
* AVAILABLE IF CONNECTED
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be o,
if there is no operation after 90 seconds of stand by mode.
Item Remote control User manual
Quantity 1
Audio-2RCA cable
1 1 1
Optical cable
2
Wall mount
1
Adaptor
Remark: please unscrew the plastic wall mount and use metal one, if the soundbar need to be hung on the wall.

Produkt Specifikationer

Mærke: Philips
Kategori: Soundbar
Model: HTL1042

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips HTL1042 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Soundbar Philips Manualer

Philips

Philips TAB5500 Manual

29 Oktober 2025
Philips

Philips TAB8200 Manual

1 Oktober 2025
Philips

Philips HTL2150 Manual

12 September 2025
Philips

Philips TAB4108 Manual

15 August 2025
Philips

Philips TAB8947 Manual

15 August 2025
Philips

Philips TAB5108 Manual

15 August 2025
Philips

Philips TAB4208 Manual

15 August 2025
Philips

Philips TAB4308 Manual

15 August 2025
Philips

Philips TAB6200 Manual

13 August 2025
Philips

Philips TAB4500 Manual

12 August 2025

Soundbar Manualer

Nyeste Soundbar Manualer

Pheanoo

Pheanoo D5 Manual

4 November 2025
Sharp

Sharp HT-SBW123 Manual

31 Oktober 2025
Sharp

Sharp HT-SBW310 Manual

31 Oktober 2025
Sharp

Sharp HT-SBW121 Manual

29 Oktober 2025
LG

LG HLS34S Manual

18 Oktober 2025
JBL

JBL Bar 1300XMK2 Manual

15 Oktober 2025
Monitor Audio

Monitor Audio SB-3 Manual

12 Oktober 2025
LG

LG SK6 Manual

4 Oktober 2025
LG

LG SK8 Manual

3 Oktober 2025
LG

LG LAS454B Manual

3 Oktober 2025