Phoenix Gold RX212D Manual


Læs gratis den danske manual til Phoenix Gold RX212D (5 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Phoenix Gold RX212D, eller vil du spørge andre brugere om produktet?

Side 1/5
Subwoofer Manual
Features
Models: RX2 12D, RX2 12S
RX2 10D, RX2 10S
• 25mm of Peak to Peak Excursion
• Dual or Single 4 Ohm Voice Coil Models
• 12” or 10” versions with hidden screw surround
• High Excursion CAE/CAD Motor Design
KlaraForm Vented Kapton Former technology reduces
distortion by reducing heat and resistance
• UNICAP Technology provides a stiff piston for
pronounced SPL
© 2018 Phoenix Gold • www.phoenixgold.com
• Phoeniroll Surround Technology promotes
linear motion
• Torriform Voice Coil Technology:
Effectively dissipates heat and minimizes distortion
• Nickel Plated 12 Gauge Speaker Terminal
• Optimized for Sealed or Vented Enclosures
• Powder Coated Anti-Resonant Steel Basket
Subwoofer Owner’s Manual
© 2018 Phoenix Gold • www.phoenixgold.com
Enclosures
Enclosure recommendations
SEALED RX2 10s RX2 10d RX2 12s RX2 12d
Rock / Punchy Bass (cu. Ft.) 0.5 0.5 1.0 1.0
Neutral / Good All Around 0.75 0.75 1.25 1.25
Hip Hop / Low Bass / (cu. Ft.) 1.0 1.0 1.4 1.4
VENTED - Rock / Punchy Bass @ 40Hz RX2 10s RX2 10d RX2 12s RX2 12d
(cu. Ft.) 1.5 1.5 2 2
Vent Area (sq in) 15.625 15.625 21.75 21.75
Vent Length (in) 14 14 14 14
ENCLOSURE INFORMATION
Phoenix Gold subwoofers are over engineered and overbuilt in virtually every way conceivable. It is important
that the subwoofer’s enclosure is built to these same exacting standards. The enclosure must be constructed of
at least .75 inch MDF. Screws or air staples are excellent construction fasteners when used with a strong bonding
“yellow” wood working glue that can ll joint gaps. Be sure that the enclosure’s panels are airtight at all joining
seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufcient. RX2 subwoofers have vented
pole pieces, we recommend leaving a minimum of 0.5” clearance behind the subwoofer to allow proper air
movement and cooling of the voicecoil.
Your PG dealer has extensive knowledge, tools and the experience needed for the design and construction
necessary for your subwoofer application. We also recommend you consult with your dealer for specic technical
assistance related to your installation. The charts provided should be used as a reference when building an
enclosure for your subwoofer. The charts contain several enclosure types. The Sound Quality enclosure provides
deeper, tighter, and more musical output to truly reproduce the original source material. The SPL enclosure ts
the “basshead’s” need for maximum output while sacricing some sound quality.
* For SQ vented enclosures a subsonic lter set at 25Hz is highly recommended.
VENTED -
Hip Hop / Low Bass
@ 35Hz RX2 10s RX2 10d RX2 12s RX2 12d
(cu. Ft.) 1.6 1.6 2 2
Vent Area (sq in) 15.625 15.625 21.75 21.75
Vent Length (in) 18 18 20 20
Enclosure recommendations already include driver and / or port displacement.


Produkt Specifikationer

Mærke: Phoenix Gold
Kategori: Subwoofer
Model: RX212D

Har du brug for hjælp?

Hvis du har brug for hjælp til Phoenix Gold RX212D stil et spørgsmål nedenfor, og andre brugere vil svare dig