Phoenix Gold ZDT-MG1 Manual


Læs gratis den danske manual til Phoenix Gold ZDT-MG1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Phoenix Gold ZDT-MG1, eller vil du spørge andre brugere om produktet?

Side 1/2
IMPORTANT: Technical knowledge is necessary for installation Please ensure that the
correct tools are using during the installation to avoid damage to the vehicle or product.
Phoenix Gold can not be held responsible for the installation of this product.
PLUG & PLAY DSP AMPLIFER
INSTRUCTION MANUAL
PHOENIXGOLD.COM
V.1.1
Remove the OEM Head Unit
OEM Head Unit
Head Unit
STEP 1
STEP 2
OEM Head Unit
OEM
Head Unit
OEM
Head Unit
ZDT Harness
ZDC Harness
1. Connect the ZDT harness to the rear of the OEM head unit.
2. Connect the ZDT harness to the ZDC harness as shown in the above diagram.
3. Run the ZDC harness from behind the OEM head unit through the back of the dashboard to the
location of where you will position your amp. We would advise installing the ZDA amp under the
seat or in the boot of the vehicle.
NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be
advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.
STEP 3
ZDA Amplifier
OEM Harness
Shown in Fig. 2
INSTRUCTION MANUAL
Example: Install under front seat
PHOENIXGOLD.COM
OEM Harness
Prior to installation the vehicle battery should be disconnected so no power is running to
any of the electrics in the vehicle.


Produkt Specifikationer

Mærke: Phoenix Gold
Kategori: Ikke kategoriseret
Model: ZDT-MG1

Har du brug for hjælp?

Hvis du har brug for hjælp til Phoenix Gold ZDT-MG1 stil et spørgsmål nedenfor, og andre brugere vil svare dig