Phoenix Gold ZDC-VAG2 Manual


Læs gratis den danske manual til Phoenix Gold ZDC-VAG2 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Phoenix Gold ZDC-VAG2, eller vil du spørge andre brugere om produktet?

Side 1/3
IMPORTANT: Technical knowledge is necessary for installation Please ensure that the
correct tools are using during the installation to avoid damage to the vehicle or product.
Phoenix Gold can not be held responsible for the installation of this product.
PLUG & PLAY DSP AMPLIFER
INSTRUCTION MANUAL
PHOENIXGOLD.COM
V.1.1
STEP 1
ZDC Harness
2. Connect the fitting end of the ZDC harness to the OEM amplifier.
3. Connect the other end to the OEM amplifier harness to the ZDC harness
4. Run the ZDC harness from the OEM amplifier through the vehicle to the location of where you
will position your amp. We would advise installing the ZDA amplifier in the boot of the vehicle.
NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be
advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.
STEP 2
ZDA Amplifier
OEM Amp
Harness
INSTRUCTION MANUAL
PHOENIXGOLD.COM
OEM Amplifier
Example: OEM Amplifier located under front seat
ZDA Amplifier
ZDC Harness
OEM Amplifier
OEM Amp
Harness
OEM Amplifier
Prior to installation the vehicle battery should be disconnected so no power is running to
any of the electrics in the vehicle.


Produkt Specifikationer

Mærke: Phoenix Gold
Kategori: Ikke kategoriseret
Model: ZDC-VAG2

Har du brug for hjælp?

Hvis du har brug for hjælp til Phoenix Gold ZDC-VAG2 stil et spørgsmål nedenfor, og andre brugere vil svare dig