Phonic DT44 Manual

Phonic Ikke kategoriseret DT44

Læs gratis den danske manual til Phonic DT44 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Phonic DT44, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DT44 | DT88 EXPANSION CARD

English

INTRODUCTION

The DT44 and DT88 are Asystems’ Dante

expansion cards for their digital matrix systems.

This allows for either 4x4 or 8x8 audio networking

with any other Dante-enabled Asystems product.

The DT44 and DT88 are compatible with the

Asystems DMP8800, DMP808, DMA8825,

DMA8813, DMA8425, DMA8813, NT2508,

NT2504, NT1308, NT1304 or NT4004.

Use this expansion card only with appropriate

Asystems models. Using third party hardware

could be detrimental to the operation of the

product.

DANTE CONTROL SOFTWARE

To effectively route signals through your DT

expansion card and your Aystems product,

Asystems suggests installation of the Dante

Controller routing software. This is available for

free on the Audinate website.

https://www.audinate.com/products/software/

dante-controller

Software is compatible with Windows 7, Windows

8.1 and Windows 10. It is also compatible with

Apple OSX 10.10.5, OSX 10.11.6 and macOS

10.12.

Extensive user documentation and tutorial videos

can be found on Audinate’s site to help explain

how the Dante Controller software operates.

For information on routing through the Asystems

product, refer to your product’s user guide.

INSTALLATION

Ensure the power cable is not connected to the

device when installing the DT expansion card.

This ensures there are no live components in the

device that could result in electric shock. If unsure,

consult a qualied engineer for installation.

1. Loosen the two screws and remove the cover

plate.

2. Connect the DT44 or DT88 Dante Networking

card.

3. Tighten the two screws back to secure the

cover plate.

DT44 | DT88

EXPANSION CARD

SAFETY WARNINGS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions provided in this document.

5. Do not use this apparatus near water or in

locations where condensation may occur.

6. Do not submerge in water.

7. Clean only with dry cloth. Do not use aerosol or

liquid cleaners. Unplug before cleaning.

8. Do not block any of the ventilation openings.

Install in accordance with the manufacturer’s

instructions.

9. Do not install near any heat sources such

as radiators, head registers, stoves, or other

apparatus (including ampliers) that produce heat.

10. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug

does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

11. Protect the power cord from being walked

on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

12. Only use attachments/accessories specied

by the manufacturer.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug damage, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operation normally, or

has been dropped.

15. Do not unplug the apparatus by pulling on the

cord; use the plug.

16. Adhere to all applicable, local codes.

17. Consult a licensed professional when any

question arise regarding installation of the

apparatus.

18. No naked ame sources, such as lighted

candles, should be placed on the apparatus.

19. This apparatus is for professional use only.

Produkt Specifikationer

Mærke:	Phonic
Kategori:	Ikke kategoriseret
Model:	DT44

Har du brug for hjælp?

Hvis du har brug for hjælp til Phonic DT44 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Phonic Manualer

Phonic i2600 Manual

19 Juli 2025

Phonic DMP8800D Manual

19 Juli 2025

Phonic GEQ 3102F Manual

19 Juli 2025

19 Juli 2025

16 December 2024

16 December 2024

16 December 2024

Phonic DMP808D Manual

11 December 2024

Phonic DT44 Manual

11 December 2024

Phonic DMP8800 Manual

11 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Alto-Shaam 200-HW/D643 Manual

16 September 2025

Turbo Air PRO-50H Manual

16 September 2025

16 September 2025

16 September 2025

16 September 2025

16 September 2025

Vitammy Autoband 5 Manual

16 September 2025

DeLOCK 91739 Manual

16 September 2025

Alto-Shaam 100-HW/D643 Manual

16 September 2025

Turbo Air M3H47-2-G Manual

16 September 2025