Pioneer CP-4EX Manual

Pioneer Højtalerbeslag CP-4EX

Læs gratis den danske manual til Pioneer CP-4EX (32 sider) i kategorien Højtalerbeslag. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Pioneer CP-4EX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

http://www.pioneer.co.uk

(or http://www.pioneer.eu)

Thank you for buying this Pioneer product. This speaker stand

should only be used with the S-4EX Pioneer speaker system.

Please read through these operating instructions for proper

assembly and use. After you have finished reading the

instructions, put them away in a safe place for future reference.

Before you start

Before setting up your speaker system, we recommend reading

the operating instructions for your system thoroughly.

• Do not use this speaker stand with speakers other than the

Pioneer S-4EX, since the product balance may be impaired,

resulting in tipping or dangerous falls.

• Only use the screws supplied when fixing the speaker to the

speaker stand.

• Do not place the stand on an unstable and/or sloping surface.

The stand and speaker may fall and cause injury.

• Do not use with any speaker system other than the one for

which the unit was designed. The stand may collapse and be

damaged and/or the speaker may fall and cause injury.

• When moving the speaker and stand, first remove the speaker

from the stand, and then move the stand, holding it by the

stems.

• Place the stand on a stable, level surface; placing the stand on

an unstable surface can be dangerous.

• Pioneer assumes no liability whatsoever for damages

resulting from assembly, improper mounting, insufficient

reinforcement, misuse of the product, acts of nature, etc.

Names of Parts

Attaching speakers to the

stands

A medium Phillips screwdriver is required for attaching the

speakers.

Assembly with the S-4EX speaker

system

If you are using the S-4EX speaker system, note that there is a

fastening nut provided on the speaker base (see below).

When installing spikes on speaker

Use only spikes supplied with S-4EX.

1 Set spikes into three locations on bottom of speaker.

Consult the S-4EX operating instructions for additional

instructions.

2 Apply the furnished cork plates on the three locations on

the speaker support.

3 Rest the speaker gently on the speaker support while

aligning the spikes with the cork plates on the top of the

speaker support, then fix in placing using the washers,

spring washers, and screws (bind head M5 x L55).

S eake su o tp r pp r

Stand stems

Stand base

Screw holes

fo secu eaker ring sp r

Non-skid

co adsrk p

S eakep r

su o tpp r

Co latesrk p

[SEC2255]

55 mm

Black

S eake basep r

S eakep r

su o tpp r

Sc ew holesr

fo secu ingr r

s eakep r

Fastening nut

Washer

[SBE6006]

S ing washepr r

[SBE6005]

Screws

(Bind head, M5 x L55)

[SBA1307]

Co latesrk p

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	Højtalerbeslag
Model:	CP-4EX
Bredde:	360 mm
Dybde:	485 mm
Højde:	570 mm
Vægt:	13900 g
Produktfarve:	Sort
Kapabilitet:	S-4EX
Minimum afstand til gulvet:	576 mm
Maksimal afstand til gulv:	576 mm