Pioneer DEH-1700R Manual

Pioneer Bilradio/cd-afspiller DEH-1700R

Læs gratis den danske manual til Pioneer DEH-1700R (8 sider) i kategorien Bilradio/cd-afspiller. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Pioneer DEH-1700R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Operation Manual

Manual de instrucciones

High power CD player with RDS tuner

Reproductor de CD de alta potencia con sintonizador

RDS

DEH-1730R

DEH-1700R

English Español

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

HÒ¡ýPlø

=lø : ð-qïµ44_13

ûq : (02) 2521-3588

HÒûP/Plø

/]w/ÎLFm-Ã

9901-6¤

ûq : (0852) 2848-6488

Published by Pioneer Corporation.

Publicado por Pioneer Corporation.

Corporation. Todos los derechos

reservados.

Printed in

Impreso en

<URD3842-A> EW

Head unit

1 TA button

Press to turn TA function on or off. Press

and hold to turn AF function on or off.

2 BTB button

Press to select various BTB (bass treble

booster) setting.

3 Disc loading slot

Insert a disc to play.

4 LOUDNESS button

Press to turn loudness on or off.

5 EJECT button

Press to eject a CD from your built-in CD

player.

6 AUDIO button

Press to select various sound quality con-

trols.

7 c/d buttons

Press to do manual seek tuning, fast for-

ward, reverse and track search controls.

Also used for controlling functions.

8 DETACH button

Press to remove the front panel from the

head unit.

9 BAND button

Press to select among two FM and MW/LW

bands and cancel the control mode of func-

tions.

a LOCAL/BSM button

Press to turn local function on or off.

Press and hold to turn BSM function on or

off.

b 16 buttons

Press for preset tuning.

c SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all the available

sources.

d VOLUME (+/) buttons

Press to increase or decrease the volume.

Whats What

About this unit

The tuner frequencies on this unit are allo-

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other

areas may result in poor reception. The RDS

(radio data system) function operates only in

areas with FM stations broadcasting RDS sig-

nals.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, this unit damage, smoke, and overheat

could result from contact with liquids.

! A CLASS 1 LASER PRODUCT label is affixed

to the bottom of this unit.

CLASS 1

LASER PRODUCT

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

! Should this product fail to operate properly,

contact your dealer or nearest authorized Pio-

neer Service Station.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attach-

ing.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

Press DETACH and the right side of the panel

is released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be de-

tached from the head unit.

3 Put the front panel into the protective

case provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against the

head unit.

2 Press the front panel into the face of

the head unit until it is firmly seated.

Before You Start

URD3842-A -Page 1-

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to Playing a CD).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Built-in CD playerTuner

When you select a source the unit is turned

on.

Notes

! When no disc has been set in the unit, the

source will not switch to the built-in CD player.

! When this units blue/white lead is connected

to the vehicles auto-antenna relay control

terminal, the vehicles antenna extends when

this units source is turned on. To retract the

antenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Listening to the radio

1 2 4 53

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to Se-

lecting alternative frequencies).

1 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

2 LOC indicator

Shows when local seek tuning is on.

3 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

4 Frequency indicator

Shows to which frequency the tuner is

tuned.

5 Preset number indicator

Shows which preset has been selected.

1 Press SOURCE to select the tuner.

2 Use VOLUME to adjust the sound level.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2 for FM or MW/LW.

4 To perform manual tuning, briefly press

c or d.

Power ON/OFF Tuner

5 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

either c or d.

# If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the button.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

! Up to 12 FM stations, 6 for each of the two

FM bands, and 6 MW/LW stations can be

stored in memory.

% When you find a frequency that you

want to store in memory press one of pre-

set tuning buttons 16 and hold until the

preset number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

% Press LOCAL/BSM repeatedly to turn

local seek tuning on or off.

When local seek tuning is on, LOC appears in

the display.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 16.

% Press LOCAL/BSM and hold until the

BSM turns on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning buttons 16 in the

order of their signal strength. When finished,

BSM stops flashing.

# To cancel the storage process, press

LOCAL/BSM.

Introduction of RDS operation

1 2 43

RDS (radio data system) is a system for provid-

ing information along with FM broadcasts.

This inaudible information provides such fea-

tures as program service name, program type,

traffic announcement standby and automatic

tuning, intended to aid radio listeners in find-

ing and is tuning in to a desired station.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only

active when your radio is tuned to an RDS

station.

1 Program service name

Shows the name of broadcast program.

2 AF indicator

Shows when AF (alternative frequencies

search) function is on.

3 TA indicator

Shows when TA (traffic announcement

standby) function is on.

4 TP indicator

Shows when a TP station is tuned in.

Switching the RDS display

When you tune in an RDS station its program

service name is displayed. If you want to know

the frequency you can.

% Press BTB and hold until the display

switches.

Press BTB and hold repeatedly to switch be-

tween the following settings:

Program service namePTY information

Frequency

PTY (program type ID code) information is

listed on PTY list.

# PTY information and the frequency of the cur-

rent station appears on the display for eight sec-

onds.

Receiving PTY alarm

broadcasts

PTY alarm is a special PTY code for announce-

ments regarding emergencies such as natural

disasters. When the tuner receives the radio

alarm code, ALARM appears on the display

and the volume adjusts to the TA volume.

When the station stops broadcasting the

emergency announcement, the system re-

turns to the previous source.

! An emergency announcement can be can-

celled by pressing TA.

Selecting alternative

frequencies

If you are listening to a broadcast and the re-

ception becomes weak or there are other pro-

blems, the unit will automatically search for a

different station in the same network which is

broadcasting a stronger signal.

! AF is on as a default.

% Press TA and hold repeatedly to turn AF

on or off.

When AF is on, AF appears in the display.

RDS

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the stations AF list. (This is only

available when using presets on the F1 band.)

No preset number appears on the display if

the RDS data for the station received differs

from that for the originally stored station.

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! When the tuner is tuned to a non-RDS station

the AF indicator flashes.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the unit will

automatically search for a different station

with the same programming. During the

search, PI SEEK is displayed and the output is

muted. The muting is discontinued after com-

pletion of the PI Seek, whether or not a differ-

ent station is found.

Using Auto PI Seek for preset

stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek.

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programs.

% Press BAND and hold until the regional

function turns on or off.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear on the dis-

play if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic

announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other networks TP station (a station

carrying information which cross-references

TP stations).

1 Tune in a TP or enhanced other net-

works TP station.

When you are tuned into a TP or enhanced

other networks TP station the TP indicator will

light.

URD3842-A -Page 2-

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	Bilradio/cd-afspiller
Model:	DEH-1700R

Har du brug for hjælp?

Hvis du har brug for hjælp til Pioneer DEH-1700R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilradio/cd-afspiller Pioneer Manualer

Pioneer DEH-P90DAB Manual

20 Januar 2025

Pioneer RS-D7RII Manual

8 Juli 2024

Pioneer DEH-P7700MP Manual

6 Juli 2024

Pioneer DEH-8300SD Manual

5 Juli 2024

Pioneer DEH-P6100R Manual

5 Juli 2024

Pioneer DVH-P5000UB Manual

4 Juli 2024

Pioneer KEH-2730R Manual

4 Juli 2024

Pioneer DEH2000R installatie Manual

4 Juli 2024

Pioneer DEH-P2600R Manual

4 Juli 2024

Pioneer RS-P90 Manual

4 Juli 2024

Bilradio/cd-afspiller Manualer

Nyeste Bilradio/cd-afspiller Manualer

JVC KS-AX6604 Manual

15 Januar 2025

Fusion PP-AM8004 Manual

19 September 2024

Belson BS12100 Manual

26 August 2024

Mx Onda MX1500 Manual

25 August 2024

Belson BS12150 Manual

25 August 2024

Belson BS11900 Manual

25 August 2024

Belson BS11520 Manual

25 August 2024

Mx Onda HUESCA Manual

25 August 2024

DLS RA 10 Manual

25 August 2024

Mx Onda BAEZA Manual

25 August 2024