Plugwise Stealth M 20A Manual

Plugwise Ikke kategoriseret Stealth M 20A

Læs gratis den danske manual til Plugwise Stealth M 20A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Plugwise Stealth M 20A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Be wise, plug in.
Stealth installaon
Stealth installaon guide
Also applicable to: Stealth+, Stealth M, Stealth M+
Be aware:
The Stealth is specically designed
to be built in to an appliance/lighng
xture or as a permanently connected
device in the electrical installaon of
a building. Installaon should always
be executed by a registered installer
in compliance with the local electrical
code (e.g. BS 7671 or NEC).
It is required to include an overcurrent protecve device (Circuit breaker)
before the Stealth, in the EU the maximum rang should be 16A, in North
America it should be no more than 20A. Be sure to switch o the circuit
before installing the Stealth!
The product should be installed in a closed ame retardant casing with a
proper strain-relief mechanism.
Use the L↑ labelled clamp to connect the phase wire to the appliance and
connect the neutral wire to one of the ‘N’ labelled clamps. Then connect
the incoming phase wire to the clamp labelled ‘L’ and the neutral wire to
the free ‘N’ connecon.
For double phase 230V networks the second phase can be connected to the ‘N’ poles
(it will not be switched).
Informaon for the installer
Technical details
Voltage: 100-240 V~ Frequency: 50 / 60 Hz Total max. current: 16 A
If a normal Stealth with relay is used, these addional maximum rangs apply:
• Inducve load: 4A
• Capacive load: 1A
Exceeding these rangs will adversely aect the service life of the relay!
Dimensions:
57.1 x 39 x 21 mm
ZigBee Dynamic MESH
2.4 GHz
E: helpdesk@plugwise.com T: +31(0) 252 43 30 70 W: www.plugwise.com
All specicaons without prejudice.
See www.plugwise.com for detailed informaon.
Be wise, plug in.
Stealth installaon
Stealth installaon guide
1. Insert screwdriver and move in the direcon of the arrow (up)
2. Insert wire
L L N
Appliance/ circuit
Inverter
N
L
Be aware:
Connect the L↑ (black line) to the appliance to be measured (in this
example the inverter of the solar panel).

Produkt Specifikationer

Mærke: Plugwise
Kategori: Ikke kategoriseret
Model: Stealth M 20A

Har du brug for hjælp?

Hvis du har brug for hjælp til Plugwise Stealth M 20A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Plugwise Manualer

Plugwise

Plugwise Switch Manual

20 Juli 2024
Plugwise

Plugwise Stealth 070155 Manual

19 Juli 2024
Plugwise

Plugwise Stealth M 20A Manual

19 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue 630 Manual

1 August 2025
Hozelock

Hozelock 4712 Manual

1 August 2025
Navman

Navman Platinum S150 Manual

1 August 2025
Navman

Navman AUTO500 DUAL Manual

1 August 2025
Navman

Navman MiVue 150 SAFETY Manual

1 August 2025
Navman

Navman MiVue 338 Manual

1 August 2025
Navman

Navman MyTruck II Manual

1 August 2025
Navman

Navman S-Series Classic S45 Manual

1 August 2025
Navman

Navman EZY30 Manual

1 August 2025
Navman

Navman AUTO300 WIFI Manual

1 August 2025