Porter-Cable PC1500HG Manual

Porter-Cable Varmepistol PC1500HG

Læs gratis den danske manual til Porter-Cable PC1500HG (32 sider) i kategorien Varmepistol. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Porter-Cable PC1500HG, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
Two Speed Variable
Temperature Heat Gun
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
CATALOG
NUMBERS
PC1500HG,
PC1500HGA
Pistolet thermique à
température variable et à
deux vitesses
Pistola de calor de dos
velocidades y
temperatura variable
Important Safety Warnings and Instructions
WARNING: When using electric tools, basic safety precautions should always be
followed to reduce risk of fire, electric shock, and personal injury, including the following.
READ ALL INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Before any use, be sure everyone using this tool reads and understands all safety
instructions and other information contained in this manual.
• Save these instructions and review frequently prior to use and in instructing others.
General Safety Warnings and Instructions for All Tools
•KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
•CONSIDER WORK AREA ENVIRONMENT. Donʼt expose power tools to rain. Donʼt use
power tools in damp or wet locations. Keep work area well lit. Do not use in presence of
flammable liquids or gases. Motors in these tools normally spark, and the sparks may
ignite the fumes.
•GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces.
For example; pipes, radiators, ranges, refrigerator enclosures. Use extreme caution when
drilling, driving, or cutting into walls, floors, ceilings or other areas or wherever live
electrical wires may be contacted, do not touch any metal parts of the tool. Hold the tools
only by the plastic handle to prevent electric shock.
•KEEP CHILDREN AWAY. Do not let children and visitors contact tool or extension cord.
All children and visitors should be kept away from work area.
•STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-
up place–out of reach of children.
•DONʼT FORCE TOOL. It will do the job better and safer at the rate for which it was
intended.
• Donʼt force small tool or attachment to do the job of a heavy-dutyUSE RIGHT TOOL.
tool. Donʼt use tool for purposes not intended.
•DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in
moving parts. Heavy duty gloves to protect hands and non-skid footwear are
recommended when working outdoors. Wear protective hair covering to contain long hair.
•USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or
safety glasses with side shields, complying with applicable safety standards and, when
needed, a face shield. Also use face or dust mask if cutting operation is dusty. This
applies to all persons in the work area. Also use a hard hat, hearing protection, gloves,
safety shoes and dust collection systems when specified or required.
• Never carry tool by cord or yank it to disconnect from receptacle.DONʼT ABUSE CORD.
Keep cord from heat, oil, and sharp edges.
•SECURE WORK. Use clamps or a vise to hold work. Itʼs safer than using your hand and it
frees both hands to operate tool.
•DONʼT OVERREACH. Keep proper footing and balance at all times.
•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool
cords periodically and if damaged, have repaired by authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
•DISCONNECT TOOLS. Unplug the tool when not in use, when moving tool from place to
place, before servicing, and when changing accessories (such as blades, bits, cutters) or
making adjustments.
•REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that
keys and adjusting wrenches are removed from tool before turning it on.
•AVOID UNINTENTIONAL STARTING. Donʼt carry tool with finger on switch. Be sure
switch is off when plugging in.
•OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension
cords intended for use outdoors and so marked.
•STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when
you are tired or otherwise impaired.
2

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Varmepistol
Model: PC1500HG

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC1500HG stil et spørgsmål nedenfor, og andre brugere vil svare dig


Varmepistol Porter-Cable Manualer

Porter-Cable

Porter-Cable PC1500HG Manual

15 Februar 2023

Varmepistol Manualer

Nyeste Varmepistol Manualer

FERM

FERM FHG-2000D Manual

20 September 2025
FERM

FERM FHG-2000NK Manual

20 September 2025
FERM

FERM FHG-2000DK Manual

20 September 2025
CFH

CFH EBG666 Manual

18 September 2025
Milwaukee

Milwaukee M18 BHG-0 Manual

16 September 2025
Earlex

Earlex HG1200 Manual

13 September 2025
Earlex

Earlex HG1500 Manual

13 September 2025
Graphite

Graphite 59G523 Manual

8 September 2025
DeWalt

DeWalt DXV34P-QT Manual

4 September 2025
Mac Tools

Mac Tools MCD701 Manual

2 September 2025