Porter-Cable PC160JT Manual

Porter-Cable Ikke kategoriseret PC160JT

Læs gratis den danske manual til Porter-Cable PC160JT (77 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Porter-Cable PC160JT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/77
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO. CATALOG NUMBER
PC160JT
Canteadora de banco
de 152 mm (6 pulg.)
con velocidad variable
Dégauchisseuse d’établi de
152 mm (6 po) à vitesse variable
6 inch (152 mm)
Variable Speed Bench Jointer
2
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool or equipment.
When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal
injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. PORTER-CABLE
strongly recommends that this product NOT be modified and/or used for any application other than for which it
was designed.
SAFETY GUIDELINES - DEFINITIONS
For your own safety, read the instruction manual 1.
before operating the machine. Learning the machine’s
application, limitations, and specific hazards will greatly
minimize the possibility of accidents and injury.
2. Wear eye and hearing protection and always use
safety glasses. Everyday eyeglasses are not safety
glasses. Use certified safety equipment. Eye protection
equipment should comply with ANSI Z87.1 standards.
Hearing equipment should comply with ANSI S3.19
standards.
Wear proper apparel. 3. Do not wear loose clothing, gloves,
neckties, rings, bracelets, or other jewelry which may get
caught in moving parts. Nonslip protective footwear is
recommended. Wear protective hair covering to contain
long hair.
Do not use the machine in a dangerous environment. 4.
The use of power tools in damp or wet locations or in rain
can cause shock or electrocution. Keep your work area
well-lit to prevent tripping or placing arms, hands, and
fingers in danger.
Do not operate electric tools near flammable liquids 5.
or in gaseous or explosive atmospheres. Motors and
switches in these tools may spark and ignite fumes.
Maintain all tools and machines in peak condition.6.
Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and
changing accessories. Poorly maintained tools and
machines can further damage the tool or machine and/or
cause injury.
Check for damaged parts.7. Before using the machine,
check for any damaged parts. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
and any other conditions that may affect its operation.
A guard or any other part that is damaged should be
properly repaired or replaced with PORTER-CABLE or
factory authorized replacement parts. Damaged parts can
cause further damage to the machine and/or injury.
Keep the work area clean.8. Cluttered areas and benches
invite accidents.
Keep children and visitors away.9. Your shop is a
potentially dangerous environment. Children and visitors
can be injured.
Reduce the risk of unintentional starting.10. Make sure
that the switch is in the position before plugging in "OFF"
the power cord. In the event of a power failure, move the
switch to the "OFF" position. An accidental start-up can
cause injury. Do not touch the plug’s metal prongs when
unplugging or plugging in the cord.
Use the guards.11. Check to see that all safety devices are
in place, secured, and working correctly to prevent injury.
Remove adjusting keys and wrenches before starting 12.
the machine. Tools, scrap pieces, and other debris can
be thrown at high speed, causing injury.
Use the right machine. 13. Don’t force a machine or an
attachment to do a job for which it was not designed.
Damage to the machine and/or injury may result.
Use recommended accessories.14. The use of accessories
and attachments not recommended by PORTER-CABLE
may cause damage to the machine or injury to the user.
Use the proper extension cord.15. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord
will cause a drop in line voltage, resulting in loss of power
and overheating. See the Extension Cord Chart for the
correct size depending on the cord length and nameplate
ampere rating. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
Secure the workpiece.16. Use clamps or a vise to hold the
workpiece when practical. Loss of control of a workpiece
can cause injury.
Feed the workpiece against the direction of the 17.
rotation of the blade, cutter, or abrasive surface.
Feeding it from the other direction will cause the
workpiece to be thrown out at high speed.
Don’t force the workpiece on the machine. 18. Damage to
the machine and/or injury may result.
Don’t overreach.19. Loss of balance can make you fall into
a working machine, causing injury.
GENERAL SAFETY RULES
Failure to follow these rules may result in
serious personal injury.
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and
PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
indicates an imminently hazardous situation which, if not avoided, result in .will death or serious injury
indicates a potentially hazardous situation which, if not avoided, result in could death or serious injury.
indicates a potentially haz ard ous situation which, if not avoided, result in may minor or mod er ate injury.
NOTICE
indicates a practice which, if not avoided, result in not related to personal injury may property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Ikke kategoriseret
Model: PC160JT

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC160JT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Porter-Cable Manualer

Porter-Cable

Porter-Cable PCCF930 Manual

3 December 2024
Porter-Cable

Porter-Cable 6931 Manual

10 August 2024
Porter-Cable

Porter-Cable 59381 Manual

6 August 2024
Porter-Cable

Porter-Cable TS056 Manual

1 August 2024
Porter-Cable

Porter-Cable 8931 Manual

1 August 2024
Porter-Cable

Porter-Cable 557 Manual

31 Juli 2024
Porter-Cable

Porter-Cable 4210 Manual

24 Juli 2024
Porter-Cable

Porter-Cable 42690 Manual

19 Juli 2024
Porter-Cable

Porter-Cable 59380 Manual

26 Juni 2024
Porter-Cable

Porter-Cable PC160JT Manual

9 Marts 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo

Kimo LR 110 Manual

2 September 2025
HMS Premium

HMS Premium LPD02 Manual

2 September 2025
AVer

AVer E1008 Manual

2 September 2025
Biltema

Biltema 17-547 Manual

2 September 2025
Groen

Groen AH/1E Manual

2 September 2025
ACOPower

ACOPower HY-P30 Manual

2 September 2025
Yamaha

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025
Globe

Globe RG30 Manual

2 September 2025
Deye

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025
Neutrik

Neutrik NLT4FXX Manual

2 September 2025