Porter-Cable PC60TPAG Manual

Porter-Cable Kværn PC60TPAG

Læs gratis den danske manual til Porter-Cable PC60TPAG (56 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Porter-Cable PC60TPAG, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/56
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
N° de catalogue
Catálogo N°
PC60TPAG
PCE829
7 amp 4-1/2 inch (114mm) angle grinder/cut off tool
Meuleuse d’angle/outil coupant de 114 mm (4 1/2 po) et de 7 A
Esmeriladora angular/cortar herramienta de 7 mperios y
114 mm (4-1/2 pulg.)
Instruction manual
Manuel d’instructions
Manual de’instrucciones
2
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the WARNINGs refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) W
hen operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting The symbols YOUR SAFETY and PREVENTING PROBLEMS.
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Kværn
Model: PC60TPAG

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC60TPAG stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn Porter-Cable Manualer

Porter-Cable

Porter-Cable PCCG400 Manual

13 Marts 2023
Porter-Cable

Porter-Cable PC60TPAG Manual

21 November 2022

Kværn Manualer

Nyeste Kværn Manualer

Hitachi

Hitachi VB16Y Manual

18 Juni 2025
Hitachi

Hitachi GP2S2 Manual

17 Juni 2025
Metabo

Metabo CC14SFS Manual

17 Juni 2025
Metabo

Metabo VB16Y Manual

17 Juni 2025
Hilti

Hilti SL 5-22 Manual

15 Juni 2025
Victoria Arduino

Victoria Arduino Mythos MyOne Clima Pro Manual

12 Juni 2025
Tryton

Tryton TS152501 Manual

9 Juni 2025
Sogo

Sogo SS-5815 Manual

9 Juni 2025
Vulcan

Vulcan VS121301 Manual

9 Juni 2025
Sogo

Sogo SS-5265 Manual

9 Juni 2025