Porter-Cable PC750AG Manual

Porter-Cable Slibemaskine PC750AG

Læs gratis den danske manual til Porter-Cable PC750AG (40 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Porter-Cable PC750AG, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
4-1/2 inch (114mm)
Angle Grinder
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
Meuleuse d’angle de
4-1/2 po. (114mm)
Esmeriladora angular de
114mm (4-1/2 pulg.)
CATALOG NUMBER
PC750AG
90536090 PC750AG Angle Grinder 6/6/08 9:13 AM Page 1
2
General Power Tool Safety Warnings
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust
. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions
can cause you to lose control
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk of electric shock
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
:
90536090 PC750AG Angle Grinder 6/6/08 9:13 AM Page 2

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Slibemaskine
Model: PC750AG

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC750AG stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibemaskine Porter-Cable Manualer

Porter-Cable

Porter-Cable PCEG011 Manual

14 August 2024
Porter-Cable

Porter-Cable PCC761B Manual

3 August 2024
Porter-Cable

Porter-Cable PC750AG Manual

30 Juli 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025
Parkside

Parkside PEXS 270 A1 Manual

13 Januar 2025
Makita

Makita 9562CVR Manual

12 Januar 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual

11 Januar 2025
Bosch

Bosch GWS 18V-8 Professional Manual

5 Januar 2025
DeWalt

DeWalt DWE4115 Manual

30 December 2025
Black Decker

Black Decker 4292 Manual

30 December 2025
Powerplus

Powerplus POWX06250 Manual

30 December 2025
Hazet

Hazet 9032M-36 Manual

30 December 2025
Alpha Tools

Alpha Tools WS 230-3 Manual

28 December 2024