Porter-Cable PCE310 Manual

Porter-Cable savemaskine PCE310

Læs gratis den danske manual til Porter-Cable PCE310 (40 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Porter-Cable PCE310, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

7-1/4” (184mm), 15 AMP Circular Saw

Scie Circulaires 7-1/4” (184mm), 15 Ampère

Sierras Circulares de 184mm (7-1/4”), 15 Amperios

CATALOG NUMBER

N° DE CATALOGUE

CATÁLOGO N°

PCE310

Instruction manual

Manuel d’instructions

Manual de’instrucciones

www.portercable.com

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA:

LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Thank you for choosing PORTER-CABLE! To register your new product, go to:

www.portercable.com/ServiceAndSupport/ProductRegistration.aspx

Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/

ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.

Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto, visite: www.

portercable.com / ServiceAndSupport / ProductRegistration.aspx

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING:

Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence

of flammable liquids, gases or dust.

Power tools create sparks which may

ignite the dust or fumes.

Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapter

plugs with earthed (grounded)

power tools. Unmodified plugs and

matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged or

entangled cords increase the risk of

electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

If operating a power tool in a damp

location is unavoidable, use a

ground fault circuit interrupter (GFCI)

protected supply. Use of a GFCI

reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool. Do

not use a power tool while you

are tired or under the influence of

drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious

personal injury.

Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, nonskid safety shoes, hard

hat, or hearing protection used for

appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off

position before connecting to power

source and/ or battery pack, picking

up or carrying the tool. Carrying

power tools with your finger on the

switch or energizing power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on.

A wrench or a key left attached to a

rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you

to hazardous situations and your risks of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may

result in minor or mod er ate injury.

NOTICE: Used without the safety alert symbol indicates potentially hazardous

situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke:	Porter-Cable
Kategori:	savemaskine
Model:	PCE310

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCE310 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Porter-Cable Manualer

Porter-Cable PCCS500 Manual

30 August 2024

Porter-Cable PCCM300 Manual

28 August 2024

Porter-Cable PCE360 Manual

27 August 2024

Porter-Cable PCCS340 Manual

24 August 2024

Porter-Cable PCE310 Manual

26 Juli 2024

Porter-Cable PCCS300 Manual

24 Juli 2024

Porter-Cable PCXB310BS Manual

22 Juli 2024

Porter-Cable PCE341 Manual

18 Juli 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024