Posiflex BB-3000 Manual


Læs gratis den danske manual til Posiflex BB-3000 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Posiflex BB-3000, eller vil du spørge andre brugere om produktet?

Side 1/4
1
Package Contents
BB- /3100 Bump Bar (x 1) 3000
2m ong-L Dedicated - Cable (x 1) RS 232
User Manual (x 1)
Views of the Bump Bar
Top View
Bottom View Front View
BB-3000/3100
Bump Bar
User Manual
SERVE Button
NEXT Button
SIDE ON Button
RECALL Button
( ) Reserved
SERVE Button
PREV Button
RECALL Button
19100900020 Ver. A0
RS-2 Port 32
Reset Button
Status LED Indicator
Rubber Pad
Rubber Pad
Fixed Portion
2
Enabling the BB-3000/3100
Power that enables the BB- /3100 to work is supplied by your host 3000
terminal. To make your host terminal supply power to the BB- /3100, you 3000
need only a dedicated - cable instead of a power adaptor. Thus, simply RS 232
follow two steps made below to power on the BB- /3100. 3000
1. 3000 Connect the RS-232 COM port of the BB- /3100 to a specied COM
port of your host terminal through a dedicated - cable. RS 232
2. By using your dedicated application, select the specied COM port and a
baud rate.
3. Enable the COM port you selected.
Jumper Setting for a Baud Rate
To set a baud rate, please adjust the dip switch on the main board of the device.
Refer to the following steps to locate the dip switch on the main board.
1. Loosen and remove the two screws from the
top cover of BB-3000 1 . /3 00
2. Remove the top cover.
3. You can easily nd the dip switch on the
main board.


Produkt Specifikationer

Mærke: Posiflex
Kategori: Ikke kategoriseret
Model: BB-3000

Har du brug for hjælp?

Hvis du har brug for hjælp til Posiflex BB-3000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Posiflex Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer