Posiflex FA-266 Manual

Posiflex Ikke kategoriseret FA-266

Læs gratis den danske manual til Posiflex FA-266 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Posiflex FA-266, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page 1 / 2

I. FEATURES

 ISO 7811 or JIS I/II Magnetic Stripe Reader in USB full speed HID interface

 Options for ISO MSR heads covering 1&2 and all 3 tracks

 3 tracks type MSR can read also AAMVA and CA DMV card

 Optional optical Finger Print Sensor in USB interface

 Industry's most accurate ngerprint algorithm

 Total power consumption: 300 mA @ 5V DC

 Upgrade kit for fan free touch control Desktop POS terminals FT series

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,

may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part

15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct

the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult

his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by

no means responsible for any damage or hazard caused by improper application.

The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiex Technologies, Inc.

further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire

risk arising out of the use or performance of the software and documentation remains with you.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit FA-200 for the Posiflex fan free touch control

Desktop POS terminals FT systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to

accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational

aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.

The manufacturer of the FA-200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due

to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of

our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.

 Copyright Posiflex Technologies, Inc. 2007

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technologies, Inc. the publisher of this

documentation

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technologies, Inc., an ISO-9001 and ISO-14001 certified manufacturer.

Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.

II. INSTALLATION

1. HARDWARE INSTALLATION

For FA-200 series ordered with the host system FT series, it is installed on the system at

delivery. For separately ordered FA-200 series, it is delivered separately from the system and

needs to be fixed onto the system per following instructions before use.

No matter whether the kit itself contains the optional finger print sensor

or not, the connection to the FT system is through an internal cable in right

side cover of the LCD/touch unit. Remove the 2 circled screws in the right

picture to remove the cover for side mount upgrade kit. Take out the cable

inside this cover as circled in the picture here and connect it to connector

inside the side mount upgrade kit as arrowed in the same picture. Gently

arrange the excessive length of this cable back in the hole and screw-fit it

back to the position originally occupied by the cover as in the right picture.

Please reserve the cover if there is chance to have the side mount kit

removed in the future.

2. DRIVER INSTALLATION

1. For MSR: The magnetic stripe reader in FA-200, no matter how many tracks are in the

reader head, connects to the host through USB port working as a USB KB and therefore

requires no driver installation except setting up the USB keyboard to be enabled in system

CMOS setup if the OS does not do it automatically. Refer to “Operation Guide” for

manipulation over the reader configuration.

2. For Finger Print Sensor: To include the drivers for this sensor to perform finger print

registration or verification (authentication) in an AP requires the software programmer to

purchase and utilize its SDK (software developer’s kit). However, Posiflex delivers this

optical finger print sensor with its drivers. Please find in the mini CD delivered with FA-

200 or Product Information CD or DVD delivered with Posiflex POS system the folder for

P/N: 19890900010

警告使用者

警告使用者警告使用者

這是甲類的資訊產品，在居住的環

境中使用時，可能會造成射頻干

擾，在這種情況下，使用者會被要

求採取某些適當的對策。

FA-200 Series

UPGRADE KIT

USER’S MANUAL

Rev. : Original

Page 2 / 2

“Posiflex Optical Finger Print Sensor” or download the installation program from our web

http://www.posiflex.com or http://www.posiflex.com.tw.

III. OPERATION GUIDE

1. MAGNETIC STRIPE READER

The MSR in FA-200 reads an ISO or JIS magnetic stripe card without driver. Yet, there

is a “Posiflex USB MSR Manager” program provided to control some parameter configuration

for this MSR. The features controllable in this program covers each ISO track enable/disable,

Alt+Num approach for ASCII codes and Leading/Stop code enable/disable. The function for

enabling each track of course comes in effect only when the track is physically available.

Please find in the mini CD delivered with FA-200 or Product Information CD or DVD

delivered with Posiflex POS system the folder for “USBMSR” and “SetUp” this demo program

or download the installation program from our web http://www.posiflex.com or

http://www.posiflex.com.tw.

2. FINGER PRINT SENSOR

a. Cautions

1. Never pour the glass cleaner directly on the sensor window

2. Never use alcohol-based cleaners

3. Never submerge the sensor in liquid

4. Never rub the window with an abrasive material, including paper

5. Do not poke the window coating with your fingernail or any hard item, such as a pen.

b. Principle

The finger print sensor software never stores fingerprint images. The finger print sensor

software creates a fingerprint template, which is a highly compressed and digitally encoded

mathematical representation of fingerprint features. This template is created when a user

registers a finger and is stored in an encrypted file. When the user later touches the fingerprint

reader to authenticate, a new template is created and compared to the “registered” template. If

there is a match, the authentication is successful.

c. Finger Print Recognition

In order for the sensor to acquire a good image of your finger, you must place the pad of

your finger but not the tip in the center of the sensor window, and apply gentle, even pressure.

Do not “roll” your finger as usually practiced in the traditional ink and paper fingerprint taking

technique. Pressing too hard will distort your fingerprint. Pressing too lightly will not expose a

large enough area of your finger. Also, make sure to hold your finger on the sensor until you

see the sensor light blink; this may take longer for dry fingers. Then, lift your finger. Although

you may use any finger with the sensor, your index finger of either hand works best. If the

sensor is capturing your finger image as indicated by the sensor blink and you have tried all the

above suggestions, you may need to reregister your finger.

d. Sensor Activation

There will always be a red light from the sensor to detect the presence of a finger when

the sensor is activated. Failure to connect to a self-powered USB port will cause non-operation

of the sensor. If you activate your terminal’s power saving functionality but your third party

application does not support this, then your fingerprint sensor will enter “sleep mode” even

though your workstation does not. If this occurs, you will need to disconnect and reconnect the

sensor to the USB port. Please check with your application developer for compatibility.

e. Cleaning the Sensor

Depending on the amount of use, the sensor window may need to be cleaned periodically.

To clean it, apply the sticky side of a piece of adhesive cellophane tape on the

window and peel it away as in the drawing at right.

Under heavy usage, the window coating on some sensors may turn cloudy

from the salt in perspiration. In this case, gently wipe the window with a cloth

(not paper) dampened with a mild ammonia-based glass cleaner.

Produkt Specifikationer

Mærke:	Posiflex
Kategori:	Ikke kategoriseret
Model:	FA-266

Har du brug for hjælp?

Hvis du har brug for hjælp til Posiflex FA-266 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Posiflex Manualer

Posiflex RA-307 Manual

25 August 2025

Posiflex RA-106 Manual

24 August 2025

Posiflex RA-305 Manual

24 August 2025

Posiflex RA-105 Manual

24 August 2025

Posiflex RA-311 Manual

22 Juli 2025

Posiflex ZA-305 Manual

28 Juni 2025

Posiflex BA-103 Manual

26 Juni 2025

Posiflex BA-303 Manual

25 Juni 2025

Posiflex RA-101 Manual

25 Juni 2025

Posiflex RA-103 Manual

25 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025

DAP-Audio DCP-26 MKII Manual

12 September 2025

Vivax MF-45E Manual

12 September 2025