Posiflex SL-104Z Manual

Posiflex Ikke kategoriseret SL-104Z

Læs gratis den danske manual til Posiflex SL-104Z (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Posiflex SL-104Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page 1 2/

SA-104/ /SL-102/104/105 105

USER’S MANUAL

Rev. : B0

I. FEATURES

 ISO 7811 Magnetic Stripe Reader 3 tracks in USB full speed

HID interface.

 Option ISO ID-Tech encrypted Magnetic Stripe Reader.

 Can read AAMVA and CA DMV card.

 Total power consumption: 50 mA @ 5V DC.

 For integration in XT-3015/4015/3014 series with SA-105/104

on Posiex POS touch terminal systems.

 For integration in LM-3014/3015 series with SL-104/105.

 For integration in TM-3112HDMI with SL- 102.

 Included with Posiex USB MSR manager to t tailored needs.

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,

may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part

15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct

the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult

his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by

no means responsible for any damage or hazard caused by improper application.

The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology Inc. further

disclaims all implied warranties including without limitation any implied warranties of merchantability or of tness for a particular purpose. The entire risk

arising out of the use or performance of the software and documentation remains with you.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the security upgrade kit SA-104/105/SL-102/104/105 for the

Posiex touch terminal systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to

accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational

aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.

The manufacturer of the -104/105/SL-102/104/105 heartily apologizes to the user for reserving the right to change or to modify this manual SA

without notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date

information through any of our web sites: http://www.posiex.com or http://www.posiex.com.tw.

 Copyright Posiex Technology Inc. 2013

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiex Technology Inc. the publisher of this documentation

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiex Technology Inc., an ISO-9001 and ISO-14001 certied

manufacturer. Other brand and product names are trademarks and registered trademarks and service marks of their

respective owners.

II. INSTALLATION

1. HARDWARE INSTALLATION

SA- 4/105/SL-104/105 is a USB MSR attachment. SA-104 is for -3114 and SA-105 is for XT-10 XT

3015/4015 terminal series. -104 is for LM-3014/XT-2614 and SL-105 is for LM-3015 monitor. SL

SL-102 is for TM-3112HDMI monitor.

SA-104/105 Installation

Step A: Remove these 2 screws to remove the side mount cover on the back of the right side mount

upgrade kit.

Step B: Take out the cable inside this side mount cover as circled in below picture and connect the

SA-104/105 cable to the indicated one of 2 connectors xed on the main board inside the side mount

cover of XT-3114 and -3015/4015. XT

Step C: Gently arrange the excessive length of this cable back in the hole and use the 2 original

screws to t SA-104/105 back to the position originally occupied by the cover. Please reserve the

cover if there is a chance to have the side mount kit removed in the future.

For SL-1 /105 series ordered with the - host system and for SL-102 ordered with TM-04 LM 14” & 15”

3112HDMI, it is separately delivered from the system at delivery and needs to be xed onto the

system per the following instructions before use.

Step A: Remove the 2 circled screws in the below picture to remove the side mount cover on the

back of the right side mount upgrade kit.

P/N: 18600900030

警告使用者

警告使用者警告使用者

這是甲類的資訊產品，在居住的環

境中使用時，可能會造成射頻干

擾，在這種情況下，使用者會被要

求採取某些適當的對策。

T31454

Page 2 2/

Step B: Take out the cable inside this cover as circled in the below picture and connect the SL-

102/1 /105 cable to the indicated one of the 2 prolonged connectors inside the side mount upgrade 04

kit as indicated.

Step C: Gently arrange the excessive length of this cable back in the hole and screw-t it back to the

position originally occupied by the cover. Please reserve the cover if there is chance to have the side

mount kit removed in the future.

SL-102/104/105 Installation

2. SOFTWARE CONFIGURATION

To customize country specic requirements or meet tailor-made needs, Posiex USB MSR

Manager gives an accessible interface below while factory installed. The SA- /104/SL-105

102/104/105 not required to function synchronously with MSR program to enable card reading. is

User is also required not to modify any settings on this program except that specic or tailor-made

changes are essential for card reading alternatives.

3. DRIVER INSTALLATION

For USB MSR: The magnetic stripe reader in SA-104/105/SL-102/104/105 USBMR: USB 1.1 Full- ,

Speed type, H Keyboard Emulation Class no matter how many tracks are in the reader head, ID ,

connect to the host through USB port. It operates as a USB KB and therefore requires no driver

installation. You only need to set the USB keyboard to be enabled in system CMOS setup if the OS

does not do it automatically. Refer t manipulation over the reader o “Operation Guide” for

conguration.

III. OPERATION GUIDE

1. MAGNETIC STRIPE READER

The MSR in SA- 4/105/SL-102/104/105 reads an ISO magnetic stripe card without driver. Yet, 10

there is a “Posiflex USB MSR Manager” above program provided to control some parameter

conguration for this MSR. In DOS operating system mode, MSR manager works best with USB

keyboard support available in BIOS environment. Similarly, MSR manager works poorly with DOS

mode, if Windows mode is enabled. Except that is defaulted for Sending Leading/Ending Codes

enabling, the features controllable in this program cover each track enable/disable, Alt+Num approach

for ASCII codes. Please nd in the mini CD delivered with SA- 4/105/SL-102/104/105 or Product 10

I nformation CD delivered with Posiflex POS system the folder for “USBMSR” and “Set Up” this

ocial Manager program or download the installation program from our web

http://www.posiex.com http://www.posiex.com.tw or .

I. OPERATION GUIDE

The MSR in SA- 4/105/SL-102/104/105 series reads an ISO magnetic stripe card without additional 10

device driver and its icon can be viewed accordingly in program. For Windows Device Manger

magnetic stripe card reading, be sure to insert the card to the bottom with magnetic stripe facing the

mark aside the slot. The movement of the card can be either inserting the card from the top surface

then sliding the card down out of the slot, or sliding the card upward from the lower side of the slot

till it reaches the top end as long as the card is a standard one. A non-standard card recorded without

complete degaussing prior to recovery may accept only one direction in card reading.

Produkt Specifikationer

Mærke:	Posiflex
Kategori:	Ikke kategoriseret
Model:	SL-104Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Posiflex SL-104Z stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Posiflex Manualer

Posiflex RA-311 Manual

22 Juli 2025

Posiflex ZA-305 Manual

28 Juni 2025

Posiflex BA-103 Manual

26 Juni 2025

Posiflex BA-303 Manual

25 Juni 2025

Posiflex RA-101 Manual

25 Juni 2025

Posiflex RA-103 Manual

25 Juni 2025

Posiflex BA-301 Manual

25 Juni 2025

Posiflex BA-104 Manual

25 Juni 2025

Posiflex ZA-304 Manual

25 Juni 2025

Posiflex RA-301 Manual

25 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech AIR-020 Manual

29 Juli 2025

Tefal Optiss BC5109 Manual

29 Juli 2025

Teslong MS100-C Manual

29 Juli 2025

Advantech TPC-651T Manual

29 Juli 2025

Advantech TPC-B510 Manual

29 Juli 2025

Advantech ARK-1220L Manual

29 Juli 2025

Gravity MS 0200 SET1 Manual

29 Juli 2025

Advantech FWA-5072 Manual

29 Juli 2025

Moulinex Oveo DD3001 Manual

29 Juli 2025

Silvergear E-reader Manual

29 Juli 2025