Posiflex TM-8115 Manual

Posiflex overvåge TM-8115

Læs gratis den danske manual til Posiflex TM-8115 (15 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Posiflex TM-8115, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

Part 1

I. FEATURES

• LM/TM-8115 is a stand along LCD monitor for industrial and commercial use.

• TM-8315 is a second display which suit for Posiflex POS Terminals with Gen.5

base stand.

• Application covers POS, Factory Automation etc.

• High quality 15” TFT LCD panel with scaling function for full screen display.

• TM-8315 support power supply through LCD cable from Posiflex Terminals

(Power supply need to setup from terminal and please refer to the terminal’s

manual).

• Recommended LCD resolution: 1024 x 768

• Resistive type extra long life touch panel in USB interface or RS232 interface

(option) supports touch panel function including left/right button, double click, drag

& drop

• Touch beep can be pitch adjusted/enabled/disabled by software control (for TM-

8115/TM-8315)

• USB HUB function with 2 ports for optional side mount devices (SD-400Z or KP-

300)

• Connect to host through VGA port plus USB port (for all models) and/or COM port

(for RS232 touch model only)

• Support 2 downlink USB ports

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class

A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against

interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause

interference in which case the user at his own expense will be required to take whatever measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians. The user

should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of

this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

This manual assists the user to utilize the LCD Monitor LM-8115 series and the Touch Monitor TM-8115/TM-8315 series. This

product provides exquisite touch control capability over a stable and adjustable LCD monitor with minimal footprint.

The manufacturer of the LM-8115 / TM-8115 / TM-8315 touch monitor heartily apologizes to the user for reserving the right to

change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology.

The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com,

http://www.posiflex.com.tw, http://www.posiflexusa.com.

 Copyright Posiflex Technology, Inc. 2011

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technology, Inc.

Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.

P/N: 19690903030

LM-8115 / TM-8115 / TM-8315

LCD Touch Monitor

User’s Manual

Rev. B0

Part 2

II. CARTON CONTENTS

1. Touch Monitor (Main unit + Adjustable base stand assembly)

2. User’s Manual

3. VGA cable

4. USB cable

5. Power adaptor & power cord(For TM/LM-8115)

(For TM-8315, please refer to the terminals manual to support power

from VGA cable)

6. Posiflex Product Information CDROM

7. Option RS232 cable

III. INSTALLATION GUIDE

TM/LM-8115

Since the monitor and stand are packaged separately,

please take out and hold the PE foams carefully and

DO NOT detach and drop it as show in the

following picture.

After take the PE foam out from the

carton, please remove the PE foam with

extra care and make sure place the

monitor and stand on a soft clean flat

surface such as table and as show in the

picture at the right side.

Please find the four holes in the top of stand.

Take the stand and align these four matching

holes to the four matching pegs which are in the

back on monitor.

After matching the stand and monitor, push the

stand to the arrowed direction as show in the right

picture. At this time, turn the monitor to the normal

position and plug the power then it can start to use.

Produkt Specifikationer

Mærke:	Posiflex
Kategori:	overvåge
Model:	TM-8115
Produktfarve:	Sort
Skærm diagonal:	15 "
Skærmopløsning:	1024 x 768 pixel
Berøringsskærm:	Ja
Skærmteknologi:	LCD
Skærm form:	Flad
Skærmvisning (OSD):	Ja
Bredde (uden stativ):	375 mm
Dybde (uden stativ):	290 mm
Højde (uden stativ):	250 mm
Vægt (uden stativ):	5600 g
Bredde (med stativ):	375 mm
Dybde (med stativ):	290 mm
Højde (med stativ):	350 mm
Dimensioner (BxDxH):	375 x 290 x 250 mm
Kan monteres på væggen:	Ja
AMD FreeSync:	Ingen
NVIDIA G-SYNC:	Ingen
Antal USB type-A downstream-porte:	2
Hældningsvinkelområde:	18 - 75 °
Antal upstream-porte:	1
USB upstream port type:	USB Type-B
Dimensioner (BxDxH) med stativ:	375 x 290 x 350 mm