Power Dynamics 171.150 PDM-S803A Manual

Power Dynamics Blandekonsol 171.150 PDM-S803A

Læs gratis den danske manual til Power Dynamics 171.150 PDM-S803A (16 sider) i kategorien Blandekonsol. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Power Dynamics 171.150 PDM-S803A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16



171.142 PDM-S803 Stage Mixer 8Ch DSP/MP3

171.144 PDM-S1203 Stage Mixer 12Ch DSP/MP3

171.147 PDM-S1603 Stage Mixer 16Ch DSP/MP3

171.150 PDM-S803A Amplifier Mixer 8ch DSP/MP3

171.151 PDM-S1203A Amplifier Mixer 12ch DSP/MP3



USER MANUAL

GEBRAUCHSANWEISUNG

HANDLEIDING

V1.1

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the

unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages

caused by inappropriate use or disrespect of the warnings contained in this manual. Tronios BV cannot be held

responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is

also applicable to all damages in whatever form.

GB

Congratulations to the purchase of our mixer (amplified=171.150 and 171.151).

Please read the manual thoroughly prior to using the unit.

WARNINGS:

Read the manual prior to using the unit.

 Keep the manual so that any other user can read it first.

 Keep the packaging so that you can transport the unit in its original packaging in order to avoid damage

 For indoor use only.

 Prior to the first use, have the unit checked by a qualified person

 The unit contains voltage carrying parts. DO NOT open the housing.

 When you unplug the unit from the mains always pull the plug, never the lead.

 Do not plug/unplug the unit with wet hands.

 If the plug and/or lead are damaged, they need to be replaced by a technician.

 If the unit is damaged to an extent that internal parts are visible, DO NOT connect the unit to the mains and

DO NOT switch it on. Contact your dealer.

 Connect the unit only to an (earthed) 220-240Vac/50Hz mains outlet protected by a 10-16A fuse.

 Do not place the unit near heat sources such as radiators, or water such as a swimming pool, wet

basement etc.

 During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains.

 If the unit has not been used for an extended period of time, condensation may occur inside the unit. Let the

unit reach room temperature first.

 Objects may not fall on, and liquids may not be spilled into the unit. Do not expose to rain.

 The unit should be installed so that its location or position does not interfere with its proper ventilation. It

should not be situated on a place that may block the ventilation openings, or in a built-in situation that may

impede the air flow.

 To avoid accidents in public premises, you need to adhere to the applicable rules and follow the

indications/instructions.

 Keep out of the reach of children.

 Do not use cleaning sprays to clean the slider controls. They leave residues that cause dust and smear

deposits inside the controls. In case of malfunction, ask a qualiﬁed technician for advice. Don’t use

benzene, thinner or other solvents for cleaning the unit.

 Make sure that all channel slider controls and the master volume control are set to the minimum prior to

switching the unit on.

 Handle the channel faders with care. Quick variations can damage the speakers as the amplifier might clip.

 Avoid clipping of the ampliﬁer. This happens if the clip Led’s, mostly mounted on the front panel of the

amplifier light up. Set the volume to a sufficiently low level.

 Make sure that the mains voltage is switched off before you make connections or changes.

 Use the appropriate connection leads for the specific signals.

 The power-cord should be routed so that it is not likely to be walked on or pinched (esp. near the plug or

exit from the unit).

 Always switch on the amplifier at latest and switch it off at first. This prevents damage to your equipment in

case of overdrive.

 Excessive force will cause damage to the unit.

 Do not place the device on an unstable bracket, stand, table etc. Do not mount on a wall if you are not able

to calculate the forces. Pls follow the instructions of the manufacturer or qualiﬁed technicians.

 Repairs must always be carried out by an agreed technical service.

 Avoid excessive mechanical charges of the parts. If the LED vu-meter is continuously in the red area, the

output signal is too strong. This results in distortion. Lower the master volume to an acceptable level in

order to prevent damage to your equipment further to overdriving.



Produkt Specifikationer

Mærke:	Power Dynamics
Kategori:	Blandekonsol
Model:	171.150 PDM-S803A

Har du brug for hjælp?

Hvis du har brug for hjælp til Power Dynamics 171.150 PDM-S803A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blandekonsol Power Dynamics Manualer

Power Dynamics PDM-T1604 Manual

5 Januar 2025

Power Dynamics PDM-Y801 Manual

2 September 2024

Power Dynamics PDSM100 Manual

2 September 2024

Power Dynamics PDM-T1204 Manual

2 September 2024

Power Dynamics 172.622 Manual

23 August 2024

Power Dynamics 952.082 Manual

23 August 2024

Power Dynamics 172.650 Manual

22 August 2024

Power Dynamics 952.161 PRM606 Manual

22 August 2024

Power Dynamics 172.626 Manual

22 August 2024

Power Dynamics 172.750 - PDZM700 Manual

22 August 2024

Blandekonsol Manualer

Nyeste Blandekonsol Manualer

Arendo Power Mixer 303085 Manual

3 April 2025

Citronic Q-PAD Manual

19 Marts 2025

Hobart MG1532 Manual

27 Februar 2025

Ecler eHMA60 Manual

10 Februar 2025

American Audio Q-D6 Manual

15 Januar 2025

ADB ME1163 Manual

15 Januar 2025

Proline HB200P Manual

15 Januar 2025

König KN-DIGICON20 Manual

11 Januar 2025

Vonyx STM500BT Manual

11 Januar 2025

Rane Sixty-Four Manual

11 Januar 2025