PowerWalker AVR 600 Manual


Læs gratis den danske manual til PowerWalker AVR 600 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om PowerWalker AVR 600, eller vil du spørge andre brugere om produktet?

Side 1/5
Automac Voltage Regulator (AVR)
PowerWalker AVR 1200
PowerWalker AVR 1000
PowerWalker AVR 600
Quick Start Guide
EN
1. Introducon
Thank you for purchasing PowerWalker product. This series is designed to automacally maintain a
constant voltage level to protect sensive electronics from brownouts and overvoltages. With its
unprofessional image, and will perfectly ulize a limited working environment. This series oers
one-step boost and one-step buck stabilizer to connuously supply a clean power source to its
connected equipment.
2. Product Overview
1. Output receptacles (for connected equipment)
2. AC Input 5. Power Switch
3 Circuit breaker 6. Power LED .
4 .Modem/phone line surge protecon 7. Boost/Buck LED
Wall Mount the Unit
The unit can be mounted to a wall surface. Please follow below steps:
1. Use tape to hold this page in place against the wall.
2. Use a sharp nail to puncture the center of the two holes to mark the wall.
(see below chart 1)
3. Mount the unit by posioning the key-hole slots over the mounng nails.
(see chart 2)
EN


Produkt Specifikationer

Mærke: PowerWalker
Kategori: Ikke kategoriseret
Model: AVR 600

Har du brug for hjælp?

Hvis du har brug for hjælp til PowerWalker AVR 600 stil et spørgsmål nedenfor, og andre brugere vil svare dig