PowerWalker VFI 1000 C LCD Manual


Læs nedenfor 📖 manual på dansk for PowerWalker VFI 1000 C LCD (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 3.9 stjerner i gennemsnit af 1.5 brugere

Side 1/5
ENGLISH
PowerWalker VFI 1000 3000 C LCD-
Quick Guide
I. LCD Panel
Display
Indicates the remaining backup me in pie chart.
Indicates the remaining backup me in numbers.
H: hours, M: minute, S: second
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and the codes are listed in
details in 3-5 secon.
Indicates that the UPS alarm is disabled.
Indicates the output voltage, frequency or baery voltage.
Vac: output voltage, Vdc: baery voltage, Hz: frequency
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Indicates the UPS connects to the mains.
Indicates the baery is working.
Indicates the bypass circuit is working.
Parameter 1
Parameter 2
Parameter 3
ENGLISH
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Indicates the Baery level by 0-25%, -50%, 51-75%, and 76-26
100%.
Indicates the baery is fault.
Indicates low baery level and low baery voltage.
Indicates the input voltage or frequency or baery voltage.
Vac: Input voltage, Vdc: baery voltage, Hz: input frequency
II. Rear panel view
1.AC input
5.SNMP intelligent slot (opon)
2.Input circuit breaker
6.Output receptacles
3.USB communicaon port
7.Output terminal (only 3kVA unit)
4.RS 232 communicaon port-
III. Communicaon connecon
USB port
RS-232 port
Intelligent slot
Apart from standard USB Port, the UPS is equipped with RS 232. Those two ports do not work -
at the same me.


Produkt Specifikationer

Mærke: PowerWalker
Kategori: Ikke kategoriseret
Model: VFI 1000 C LCD

Har du brug for hjælp?

Hvis du har brug for hjælp til PowerWalker VFI 1000 C LCD stil et spørgsmål nedenfor, og andre brugere vil svare dig