Premium Levella PFS1623 Manual


Læs gratis den danske manual til Premium Levella PFS1623 (1 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Premium Levella PFS1623, eller vil du spørge andre brugere om produktet?

Side 1/1
1
2
3
4
5
6
7
8
9
14
15
16
17
10
11
12
18
13
19
20
19
21
1. Front grill
2. Blade
3. Rear grill
5. Motor
6. Switch Box
7. Screw B
8. Extension pole
9. Out-joint
10. Lower Pipe
11. Stand Cover
12. Screw A
13. Cross base
14. Shaft
15. Switch
16. Nut
17. Cap
18. End Cap
19. Fan Body
20. Table Plate
21. Wall Firmware
1. Put the end cap at the end of the cross base.
2. Fasten the lower pipe on the cross base with
scrow A (4pcs).
3. Slide the base cover onto the cross basealong
the lower pipe.
4. Pull the extension pole out. and then tighten
the out-joint.
5. Place the motor and switch box fi
rmly on the
top of the extension pole, and tighten screw B.
6. Assemble the guard and blade on the
ftont part of the motor.
7. To change the direction and height, loosen the
out joint and adjust the extension pole at a
suitable position then tighten the out-joint
again
8. Connect Body of the Fan with table plate as
a Desk fan.
9. Connect Body of the Fan with wall firmware
as a Wall fan.
A u i i
a
2
2


Produkt Specifikationer

Mærke: Premium Levella
Kategori: Ventilator
Model: PFS1623

Har du brug for hjælp?

Hvis du har brug for hjælp til Premium Levella PFS1623 stil et spørgsmål nedenfor, og andre brugere vil svare dig